Important compatibility info
Material | NBR (nitrile butadiene rubber) |
Function | Intake Hose, air filter |
Weight | 0.190 kg |
Extra Description | febi Plus |
Type | Intake Hose, air filter |
for OE number | 13 54 1 435 627 |
Placement on Vehicle | Mass Air Flow Sensor to throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.05 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 675 mm |
Number of Connectors / Ports | 2 |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Length | 1772 mm |
Weight | 0.240 kg |
Number of Ribs | 10 |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | PTFE (polytetrafluoroethylene) |
Inner diameter | 45 mm |
Weight | 0.048 kg |
Outer diameter | 75 mm |
Width | 11.9 mm |
Type | Shaft Seal, crankshaft |
Function | Shaft Seal, crankshaft |
Placement on Vehicle | frontal sided |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.460 kg |
External Thread Size | M14 x 1,5, M14 x 2 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 323 mm |
Type | Inner Tie Rod |
Function | Inner Tie Rod |
Additional Information 2 | with clamps, with steering bellow |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (12835)
- 1x Febi Bellow, steering (03308)
- 1x Febi Fastening Clamp (03326)
- 1x Febi Fastening Clamp (03327)
Important compatibility info
Housing Diameter | 18 mm |
Length | 473 mm |
Placement on Vehicle | both sides |
Eject Force | 430 N |
Stroke | 179 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 262 mm |
Weight | 0.25 kg |
Mounting points diameter | 16.5 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 2235 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 6 |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Weight | 0.228 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.09 kg |
Function | Exhaust Valve |
Valve head diameter | 39 mm |
Valve stem diameter | 9 mm |
Length | 115.8 mm |
Type | Exhaust Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Rolling Bearing, suspension strut support mount |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Type | Rolling Bearing, suspension strut support mount |
Material | Plastic |
Thickness | 44 mm |
Outer diameter 1 | 130 mm |
Weight | 0.340 kg |
Outer diameter 2 | 70 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.99 kg |
Width | 25 mm |
Outer diameter | 178 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 4 mm |
Function | Brake Shoe Set, parking brake |
Placement on Vehicle | Rear Axle |
Type | Brake Shoe Set, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 102 mm |
Width | 45.5 mm |
Wear Warning Contact | with acoustic wear warning |
Placement on Vehicle | Rear Axle |
Weight | 0.8 kg |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 16 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.92 kg |
Placement on Vehicle | Rear Axle, Wheel Side |
Additional Information | with grease |
Additional Information 2 | with clamps |
Function | Bellow Kit, drive shaft |
Inner diameter 2 | 63 mm |
Inner diameter 1 | 25 mm |
Material | Rubber |
Type | Bellow Kit, drive shaft |
Length | 99 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (08405)
- 1x Febi Fastening Clamp (08406)
- 1x Febi Fastening Clamp (08408)
- 1x Febi Split Sleeve (08461)
- 1x Febi Split Sleeve (08462)
- 1x Febi Seal Ring (08463)
- 1x Febi Seal Ring (08464)
- 1x Febi Molybdenum Grease (08414)
Important compatibility info
Weight | 1.126 kg |
Length | 200 mm |
Width | 150 mm |
Material | Rubber/Metal |
Outer diameter | 77 mm. 87 mm |
Inner diameter | 12 mm |
Paired article numbers | 12069 |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Height | 74 mm |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Weight | 0.8 kg |
Placement on Vehicle | Front Axle Right |
Length | 188 mm |
Paired article numbers | 107494 |
Function | Tie Rod End |
Additional Information | with lock nut |
Type | Tie Rod End |
Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 32 mm |
Thickness | 160 mm |
Weight | 0.37 kg |
Material | PU (Polyurethane) |
Function | Rubber Buffer, suspension |
Placement on Vehicle | Rear Axle |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Width | 30 mm |
Outer diameter | 185 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 3.5 mm |
Function | Brake Shoe Set, parking brake |
Weight | 1.40 kg |
Type | Brake Shoe Set, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.465 kg |
Placement on Vehicle | both sides |
Length | 570 mm |
Eject Force | 910 N |
Stroke | 235 mm |
Housing length | 313 mm |
Mounting points diameter | 18 mm |
Housing Diameter | 22 mm |
Piston conrod diameter | 10 mm |
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 110.2 mm |
Width | 54.9 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Function | Brake Pad Set, disc brake |
Thickness/Strength 1 | 14.5 mm |
Type | Brake Pad Set, disc brake |
Weight | 1.136 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.233 kg |
Length | 2285 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 6 |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Weight | 0.062 kg |
Number of Connectors / Ports | 2 |
Cable Length | 932 mm |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023