Proud to be a UK-based company
Contact us
Important compatibility info
| External Teeth, Wheel Side | 33 |
| Placement on Vehicle | Front Axle Left, Wheel Side, Front Axle Right |
| Type | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 22 |
| Thread Size | M22x1,5 |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.73
Important compatibility info
| Mounting points diameter | 20 mm |
| Width of castor bearing surface | 42 mm |
| Material | Metal |
| Outer diameter | 74 mm |
| Inner diameter | 20 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.73
Important compatibility info
| Housing material | Cast Aluminium |
| Number of Teeth | 19 |
| Number of grooves | 19 |
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
| Water pump impeller material | Metal |
| Replaces | 18428; 24356; 30962; 32919 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.74
Important compatibility info
| Inner diameter | 89 mm |
| Type | Air filter kit |
| Function | Air filter kit |
| Height | 185 mm |
| Additional Information 2 | with pre-filter |
| Outer diameter | 152 mm |
| Filter type | Filter Insert |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.74
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear |
| Function | Mounting, manual transmission |
| Type | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.74
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 107468 |
| Number of Connectors / Ports | 2 |
| Cable Length | 1030 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.74
Important compatibility info
| Outer diameter | 89 mm |
| Function | Sealing Cap, tank unit (Urea injection) |
| Type | Sealing Cap, tank unit (Urea injection) |
| Colour | Blue |
| Lock System | with lock, with two keys |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.74
Important compatibility info
| Length | 2308 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.74
Important compatibility info
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (179509)
- 2x Febi Protective Cap/Bellow, shock absorber (44509)
£20.74
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Piston Diameter | 19 mm |
| Type | Wheel Brake Cylinder |
| Function | Wheel Brake Cylinder |
| Material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.74
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | 77 01 043 279 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.74
Important compatibility info
| Filter type | Filter Insert, with housing cover |
| Type | Hydraulic Filter Kit, automatic transmission |
| Outer diameter | 53 mm |
| Function | Hydraulic Filter Kit, automatic transmission |
| Additional Information | with gasket/seal |
| Height | 96 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.74
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 198142 |
| Number of Connectors / Ports | 2 |
| Cable Length | 987 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.74
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 198141 |
| Number of Connectors / Ports | 2 |
| Cable Length | 812 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.74
Important compatibility info
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Hole Spacing | 120 mm |
| for OE number | 51732681 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.75
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Material | Metal |
| Operating Mode | Pneumatic |
| Spanner Size | 27 |
| Thread Length | 14 mm |
| Number of Connectors / Ports | 2 |
| Control Type | Push Actuation |
| Function | Pressure Switch |
| Switch point from | 0.1 bar |
| Switch point to | 0.5 bar |
| Type | Pressure Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.75
Important compatibility info
| Type | Repair Kit, tilt cylinder |
| Inner diameter | 16.36 mm. 25.2 mm |
| Outer diameter | 40 mm. 39.03 mm |
| Function | Repair Kit, tilt cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.75
Important compatibility info
| Placement on Vehicle | Front Axle |
| Number of Connectors / Ports | 2 |
| Resistance | 1150 Ohm |
| Cable Length | 1502 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.75
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.75
Important compatibility info
| Additional Information 2 | with top |
| Additional Information | for multi-plate clutch |
| Function | Hydraulic Filter, multi-plate clutch (all-wheel drive) |
| Outer diameter | 45.8 mm |
| Clutch ID | Haldex Gen II |
| Filter type | Filter Insert |
| Height | 55 mm |
| Type | Hydraulic Filter, multi-plate clutch (all-wheel drive) |
| Inner diameter | 12 mm |
| Extra Description | febi Plus |
| Gasket outer diameter | 51 mm |
| Gasket inner diameter | 45 mm |
| External Thread Size | M48 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.75
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023