Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 33 mm |
| Width | 25 mm |
| Thickness | 32 mm |
| Inner diameter | 16 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.75
Important compatibility info
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Length | 203 mm |
| Material | Thermoplast |
| Inner diameter | 84 mm |
| Function | Protective Cap/Bellow, shock absorber |
| Type | Protective Cap/Bellow, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.75
Important compatibility info
| Length | 85 mm |
| Material | Rubber |
| Inner diameter 1 | 29 mm |
| Inner diameter 2 | 72 mm |
| Function | Bellow, drive shaft |
| Joint Type | Tripod Joint |
| Type | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.76
Important compatibility info
| Material | Thermoplast |
| Placement on Vehicle | Front Axle |
| Thickness | 258 mm |
| Function | Protective Cap/Bellow, shock absorber |
| Type | Protective Cap/Bellow, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.76
Important compatibility info
| Additional Information 2 | with seal ring |
| Height | 93 mm |
| Outer diameter | 77 mm |
| Inner diameter | 19 mm |
| Seal Diameter | 86 mm |
| Length | 77 mm |
| Type | Fuel filter |
| Filter type | Filter Insert |
| Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.76
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Thread Length | 10 mm |
| Type | Brake Hose |
| Function | Brake Hose |
| Internal Thread Size | M10 x 1 |
| Length | 286 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.76
Important compatibility info
| Type | Coolant Flange |
| Additional Information | with quick coupling |
| Function | Coolant Flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.76
Important compatibility info
| Type | Valve Spring |
| Function | Valve Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.76
Important compatibility info
| Function | Gasket, oil cooler |
| Material | Rubber |
| Type | Gasket, oil cooler |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.76
Important compatibility info
| Outer diameter 1 | 38 mm |
| Outer diameter 2 | 45 mm |
| Placement on Vehicle | Front Axle Left, Lower, Front, Front Axle Right |
| Material | Rubber/Metal |
| Thickness | 52 mm |
| Inner diameter | 10 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.77
Important compatibility info
| Outer diameter | 65 mm |
| Filter type | Filter Insert |
| Inner diameter | 32 mm |
| Function | Oil Filter |
| Height | 154 mm |
| Type | Oil Filter |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.77
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Rod/Strut | Coupling Rod |
| Inner diameter | 22 mm. 24 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M8 x 1,25 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.77
Important compatibility info
| Placement on Vehicle | Upper Left |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Outer diameter | 14 mm |
| Inner diameter | 7 mm |
| Cooling Hose | from expansion tank to engine cooler |
| Function | Radiator Hose |
| Type | Radiator Hose |
| Hose Length | 495 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.77
Important compatibility info
| Placement on Vehicle | Rear Axle, Outer |
| Material | Rubber/Metal |
| Outer diameter | 52 mm. 36 mm |
| Thickness | 30 mm |
| Inner diameter | 12 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.77
Important compatibility info
| Length | 230 mm |
| Height | 35 mm |
| Width | 208 mm |
| Filter type | Pollen Filter |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.77
Important compatibility info
| Length | 80 mm |
| Width | 64 mm |
| Thickness | 4.5 mm |
| Function | Seal, thermostat |
| Type | Seal, thermostat |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.77
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Cooling Hose | from heat exchanger to heater valve |
| Function | Radiator Hose |
| Hose Length | 320 mm |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.77
Important compatibility info
| Function | Suspension Strut Support Mount |
| Inner diameter | 14 mm |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Height | 43 mm |
| Outer diameter | 62 mm. 77 mm |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
| Replaces | 18178 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.77
Important compatibility info
| Shaft Length | 21 mm |
| Type | Bolt, control arm |
| Thread Length | 28.5 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| External Thread Size | M10 x 1,5 |
| Function | Bolt, control arm |
| Colour | grey |
| Quality/ Grade | 8.8 |
| Spanner Size | 13 |
| Outer diameter | 20 mm |
| Length | 59.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.77
Important compatibility info
| Height | 8.5 mm |
| Material | ACM (Polyacrylate) |
| Outer diameter | 64 mm |
| Inner diameter | 50 mm |
| Type | Shaft Seal, automatic transmission / Shaft Seal, manual transmission / Shaft Seal, manual transmission main shaft / Shaft Seal, transfer case |
| Function | Shaft Seal, automatic transmission / Shaft Seal, manual transmission / Shaft Seal, manual transmission main shaft / Shaft Seal, transfer case |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.77
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 55 mm |
| Width | 60 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Thickness | 57 mm |
| Inner diameter | 26.5 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.78
Important compatibility info
| Spanner Size | 24 |
| Number of Connectors / Ports | 1 |
| Function | Oil Pressure Switch |
| Switch point from | 0.2 bar |
| Switch point to | 0.4 bar |
| Connector / Clamp | with screw connection |
| Additional Information 2 | without seal ring |
| External Thread Size | 1/4" - 18 NPT |
| Type | Oil Pressure Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.78
Important compatibility info
| Filter type | Filter Insert |
| Inner diameter | 24 mm |
| Outer diameter | 65 mm |
| Seal Diameter | 72.5 mm |
| Function | Oil Filter |
| Height | 69 mm |
| Type | Oil Filter |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.78
Important compatibility info
| Bearing Type | Needle Bearing |
| Inner diameter | 45.2 mm |
| Material | Steel, NBR (nitrile butadiene rubber) |
| Height | 30.4 mm |
| Outer diameter | 52.02 mm |
| Type | Bush, steering knuckle |
| Function | Bush, steering knuckle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.78
Important compatibility info
| Placement on Vehicle | Intake Side, Exhaust Side |
| Function | Valve Guide |
| Type | Valve Guide |
| Valve type | for inlet valves, for exhaust valves |
| for OE number | 51.03201.1143 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.78
Important compatibility info
| Function | Stop- /Mounting Buffer |
| Type | Stop- /Mounting Buffer |
| Extra Description | febi Plus |
| Thickness | 20 mm |
| Outer diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.78
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 56 mm |
| Outer diameter | 14.5 mm |
| Inner diameter | 13 mm |
| Function | Sleeve, control arm mounting |
| Type | Sleeve, control arm mounting |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.79
Important compatibility info
| Length | 86 mm |
| Engine Management | Timing Chain |
| Type | Guide, timing chain |
| Function | Guide, timing chain |
| Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.79
Important compatibility info
| Placement on Vehicle | Front Axle |
| Material | Rubber with fabric lining |
| Inner diameter | 22.5 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.79
Important compatibility info
| Material | Steel |
| Internal Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle, Rear Axle |
| Outer diameter | 28 mm |
| Thickness | 34 mm |
| Spanner Size | 21 |
| Surface | Chromed |
| Bolt Head/Nut Design | External Hexagon |
| Quality/ Grade | 10 |
| Wheel Fastening | Conical Seat F |
| Function | Wheel Nut |
| Type | Wheel Nut |
| Rims | for light alloy rims |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.79
Important compatibility info
| Function | Mounting, stabiliser bar |
| Inner diameter | 17 mm |
| Thickness | 46 mm |
| Outer diameter | 48 mm |
| Material | Rubber/Metal |
| Width | 48 mm |
| Length | 44.5 mm |
| Placement on Vehicle | Rear Axle |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.79
Important compatibility info
| Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 46 mm |
| Thickness | 50 mm |
| Inner diameter | 10 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.79
Important compatibility info
| Placement on Vehicle | Centre |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | Mount, exhaust system |
| Function | Mount, exhaust system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.79
Important compatibility info
| Material | Rubber/Metal |
| Outer diameter | 60 mm. 25 mm |
| Thickness | 46 mm |
| Inner diameter | 17 mm |
| Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.80
Important compatibility info
| Length | 42 mm |
| Spanner Size | 13, 22 |
| Bolt Head/Nut Design | External Hexagon |
| Quality/ Grade | 10.9 |
| Surface | Zink flake coated |
| Function | Tensioner Bolt, alternator mounting |
| Type | Tensioner Bolt, alternator mounting |
| External Thread Size | M8 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.80
Important compatibility info
| Width | 11.2 mm |
| Outer diameter | 47 mm |
| Inner diameter | 25.5 mm. 28 mm |
| Material | ACM (Polyacrylate) |
| Placement on Vehicle | Right |
| Function | Shaft Seal, differential |
| Type | Shaft Seal, differential |
| Replaces | 11413 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.80
Important compatibility info
| Material | Rubber/Metal, Aluminium |
| Outer diameter | 60 mm. 27 mm |
| Thickness | 41 mm |
| Inner diameter | 17 mm |
| Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Additional Information 2 | with mounting sleeve |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (07847)
- 1x Febi Sleeve, control arm mounting (03544)
£6.80
Important compatibility info
| Height | 50 mm |
| Filter type | Spin-on Filter |
| Function | Oil Filter |
| Internal Thread Size | M20 x 1,5 |
| Type | Oil Filter |
| Outer diameter | 80 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.80
Important compatibility info
| Placement on Vehicle | both sides |
| Material | ACM (Polyacrylate) |
| Outer diameter | 56 mm |
| Thickness | 7 mm |
| Inner diameter | 27.95 mm |
| Function | Shaft Seal, manual transmission flange |
| Type | Shaft Seal, manual transmission flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.80
Important compatibility info
| External Thread Size | M10 x 1,5 |
| Placement on Vehicle | Front |
| Function | Clamping Bolt Set, ball joint |
| Screw length below head | 50 mm |
| Type | Clamping Bolt Set, ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bolt, control arm (24391)
- 2x Febi Nut (24361)
£6.80
Important compatibility info
| Hose Length | 285 mm |
| Placement on Vehicle | Upper Left |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | Radiator Hose |
| Cooling Hose | from engine to heater valve |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.80
Important compatibility info
| Material | Plastic |
| Opening Pressure | 1.4 bar |
| Function | Cap, coolant tank |
| for OE number | 13 05 248 |
| Type | Cap, coolant tank |
| Colour | Black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.80
Important compatibility info
| Function | Cap, coolant tank |
| Opening Pressure | 1.4 bar |
| Colour | Black |
| Material | Plastic |
| Type | Cap, coolant tank |
| for OE number | 1306.J5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.80
Important compatibility info
| Function | Screw Plug, oil sump |
| Quality/ Grade | 5.8 |
| Bolt Head/Nut Design | External Hexagon |
| Spanner Size | 17 |
| Length | 28 mm |
| Outer diameter | 33 mm |
| External Thread Size | M26 x 1,5 |
| Thread Length | 13 mm |
| Surface | Zinc-coated |
| Screw length below head | 16 mm |
| Material | Steel |
| Type | Screw Plug, oil sump |
| Additional Information 2 | without seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.80
Important compatibility info
| Outer diameter | 32.3 mm |
| Material | Rubber/Metal |
| Inner diameter | 10.3 mm |
| Placement on Vehicle | Rear Axle Right, Rear Axle Left |
| Thickness | 38 mm |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.80
Important compatibility info
| Material | ACM (Polyacrylate) |
| Width | 8 mm |
| Function | Shaft Seal, manual transmission |
| Outer diameter | 74 mm |
| Inner diameter | 60 mm |
| Type | Shaft Seal, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.80
Important compatibility info
| Width | 13.5 mm |
| Material | Plastic |
| Outer diameter | 45 mm |
| Inner diameter | 14 mm |
| Bearing Type | Angular Ball Bearing |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Rolling Bearing, suspension strut support mount |
| Type | Rolling Bearing, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.81
Important compatibility info
| Length | 47 mm |
| Outer diameter | 40 mm |
| Inner diameter | 16 mm |
| Placement on Vehicle | Rear Axle, Rear |
| Function | Bushing, leaf spring |
| Type | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.82
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front, Front Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 37 mm. 23 mm |
| Thickness | 62 mm |
| Inner diameter | 12 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.82
Important compatibility info
| Placement on Vehicle | Front Axle, outer |
| Length | 58 mm |
| Width | 80 mm |
| Thickness | 30 mm |
| Inner diameter | 12 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.82
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023