Important compatibility info
Inner diameter | 16.5 mm. 16.8 mm |
Pulleys | with belt pulley |
Type | Hydraulic Pump, steering |
Rotation Direction | Clockwise rotation |
Weight | 2.557 kg |
Operating Mode | Hydraulic |
Operating pressure to | 11 bar |
Function | Hydraulic Pump, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Function | Control/Trailing Arm, wheel suspension |
Weight | 23.900 kg |
Pipe Diameter | 48 mm |
Type | Control/Trailing Arm, wheel suspension |
Length | 609 mm |
Steering arm type | Triangular Control Arm (CV) |
Bore Diameter | 23 mm |
Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | Requires special tools for mounting |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 90 |
Weight | 0.167 kg |
Timing Chain Size | G68VCO, G68V |
Function | Timing Chain |
Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.21 kg |
Function | Bellow Kit, drive shaft |
Inner diameter 2 | 72 mm |
Inner diameter 1 | 19 mm |
Material | Rubber |
Length | 96 mm |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (05641)
- 1x Febi Clamping Clip (45642)
- 1x Febi Clamping Clip (38757)
- 1x Febi Circlip (03215)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 1.75 kg |
Placement on Vehicle | Front, both sides |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Replaces | 06427 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.82 kg |
Function | Seal, windscreen |
Type | Seal, windscreen |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Wings | 6 |
Type | Water Pump, engine cooling |
Additional Information | with gaskets/seals |
Weight | 5.2 kg |
Number of grooves | 8 |
Operating Mode | electromagnetic |
Function | Water Pump, engine cooling |
Seal Material | Rubber |
Water pump impeller material | Plastic |
for OE number | 2104 574 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 10.99 kg |
Rotor Style | Internally Vented |
Placement on Vehicle | Front Axle |
Outer diameter | 332 mm |
Thickness | 62 mm |
Brake Disc Thickness | 30 mm |
Minimum thickness | 28.4 mm |
Bolt Hole Circle Diameter | 120 mm |
Centering Diameter | 75 mm |
Surface | Coated |
Number of mounting bores | 1 |
Function | Brake Disc |
Rim Hole Number | 5 -Hole |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.641 kg |
Placement on Vehicle | Left |
Material | Rubber/Metal |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
for OE number | 6Q0 199 555 AS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.680 kg |
Outer diameter | 70 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Metal |
Width of castor bearing surface | 24.5 mm |
Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.050 kg |
Placement on Vehicle | Rear Axle Left |
Paired article numbers | 109397 |
Number of Connectors / Ports | 2 |
Cable Length | 497 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.42 kg |
Voltage | 24 V |
Type | Solenoid Valve |
Function | Solenoid Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.922 kg |
Type | Mounting Kit, charger |
Function | Mounting Kit, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 175545 |
Placement on Vehicle | Rear Axle Left |
Type | Splash Guard, brake disc |
Extra Description | febi Plus |
Weight | 0.212 kg |
Function | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.043 kg |
for OE number | 5 0039 1436 |
Valve type | for exhaust valves |
Type | Valve Guide |
Function | Valve Guide |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Front |
Weight | 6.660 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear |
Additional Information 2 | with cover |
Length | 503 mm |
Material | PBT |
Weight | 0.16 kg |
Type | Wiper Arm, window cleaning |
Function | Wiper Arm, window cleaning |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Glow Plug |
Weight | 0.02 kg |
Glow Plug Type | Metal glow plug |
Spanner Size | 8 |
Voltage | 11 V |
Length | 98.4 mm |
Function | Glow Plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 135 mm |
Outer diameter | 95 mm |
Weight | 0.57 kg |
Type | Filter, operating hydraulics |
Function | Filter, operating hydraulics |
Gasket outer diameter | 72 mm |
Gasket inner diameter | 63 mm |
Internal Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Metal |
Outer diameter | 53 mm |
Diameter 1 | 53 mm |
Weight | 0.345 kg |
Mounting points diameter | 10 mm |
Type | Deflection Pulley/Guide Pulley, timing belt |
Function | Deflection Pulley/Guide Pulley, timing belt |
Width of castor bearing surface | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width of castor bearing surface | 25 mm |
Material | Metal |
Outer diameter | 60 mm |
Operating Mode | Automatic |
Weight | 0.594 kg |
Type | Belt Tensioner, v-ribbed belt |
Function | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.17 kg |
Function | Relay, glow plug system |
Number of Connectors / Ports | 7 |
Type | Relay, glow plug system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm, Trailing Arm |
Type | Control/Trailing Arm, wheel suspension |
Weight | 10.520 kg |
Placement on Vehicle | both sides, Rear Axle Lower |
Length | 602 mm |
Function | Control/Trailing Arm, wheel suspension |
Hole Spacing | 130 mm |
Bore Diameter | 21 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
External Teeth, Diff.Side | 26 |
Additional Information 2 | with nut |
Thread Size | M20x1,5 |
Min. Length | 641 mm |
Weight | 5.230 kg |
External Teeth, Wheel Side | 23 |
Function | Drive Shaft |
Type | Drive Shaft |
Transmission-side joint diameter | 74.2 mm |
Wheel Sided Joint Diameter | 79.0 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.124 kg |
Length | 150 mm |
Material | Rubber |
Inner diameter 1 | 24 mm |
Inner diameter 2 | 95 mm |
Type | Bellow, drive shaft |
Function | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.204 kg |
for OE number | 601 050 08 16 |
Function | Guide, timing chain |
Engine Management | Timing Chain |
Type | Guide, timing chain |
Placement on Vehicle | Left, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.41 kg |
Function | Brake Pad Set, disc brake |
Thickness/Strength 1 | 17.5 mm. 18 mm |
Inspection Tag | ECE R90 Approved |
Wear Warning Contact | incl. wear warning contact |
Width | 75 mm. 73.2 mm |
Length | 156.2 mm. 155.2 mm |
Placement on Vehicle | Front Axle |
Type | Brake Pad Set, disc brake |
Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.750 kg |
Placement on Vehicle | Front Axle |
Length | 151 mm |
Width | 57 mm. 60.5 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 18.5 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Model | CR-V |
Manufacturer | HONDA |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 247 240 54 00 |
Function | Mounting, manual transmission |
Type | Mounting, manual transmission |
Bearing/Mounting Type | Rubber-Metal Mount |
Placement on Vehicle | Left |
Weight | 2.600 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Ribs | 5 |
Pulleys | with belt pulley |
Alternator Charge Current | 70 A |
Belt Pulley Diameter | 58 mm |
Weight | 4.91 kg |
Type | Alternator |
Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
Length | 106 mm |
Material | Thermoplast |
Inner diameter 1 | 23 mm |
Inner diameter 2 | 64 mm |
Joint Type | Tripod Joint |
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Weight | 0.084 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (175237)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Type | EGR Valve |
Function | EGR Valve |
for OE number | 51.08150.0029 |
Weight | 0.146 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.157 kg |
Placement on Vehicle | Front Axle Left, Upper, Front, Front Axle Right |
Material | Rubber/Metal |
Outer diameter | 39 mm |
Thickness | 60 mm |
Inner diameter | 12 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Tensioner Pulley, timing belt |
Weight | 0.630 kg |
Type | Tensioner Pulley, timing belt |
Outer diameter | 78 mm |
Width | 87 mm |
Width of castor bearing surface | 29 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.28 kg |
Placement on Vehicle | Front Axle Left |
Paired article numbers | 02285 |
Thread Type | with left-hand thread |
Cone Size | 14 mm |
External Thread Size | M12 x 1,5, M14 x 1,5 |
Function | Tie Rod End |
Length | 90 mm |
Extra Description | ProKit |
Additional Information | with lock nut |
Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M14 x 1,5 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 197 mm |
Function | Inner Tie Rod |
Type | Inner Tie Rod |
External Thread Size | M12 x 1,5 |
Weight | 0.430 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5, M17 x 1,5 |
Additional Information | with counter nut |
Weight | 0.70 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 294 mm |
Function | Inner Tie Rod |
Extra Description | ProKit |
Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Extra Description | ProKit |
Weight | 0.472 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Type | Inner Tie Rod |
Function | Inner Tie Rod |
Length | 214 mm |
Additional Information | with counter nut |
Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.290 kg |
Thickness | 89 mm. 57.5 mm |
Inner diameter | 12.4 mm |
Function | Bushing, axle beam |
Outer diameter | 80 mm. 69.5 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.910 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right, Lower, Rear |
Length | 105 mm |
Width | 49 mm |
Material | Aluminium |
Outer diameter | 80 mm. 64 mm |
Thickness | 60 mm |
Inner diameter | 22 mm. 17 mm |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.63 kg |
Placement on Vehicle | Lower Front Axle, Left, Rear |
Steering arm type | Control Arm |
Paired article numbers | 27012 |
Material | Steel |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing, with ball joint |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Oil Filter |
Function | Oil Filter |
Gasket outer diameter | 111 mm |
Outer diameter | 95 mm |
Height | 115 mm |
Gasket inner diameter | 104.2 mm |
Additional Information 2 | with seal ring |
Inner diameter | 34 mm |
Filter type | Filter Insert |
Weight | 0.20 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle, both sides |
Capacity | 0.4 l |
Weight | 1.65 kg |
Function | Pressure Accumulator, pneumatic suspension |
Type | Pressure Accumulator, pneumatic suspension |
Pressure | 30 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with axle nut |
Width | 39 mm |
Outer diameter | 83 mm |
Inner diameter | 45 mm |
Bearing Type | Angular Ball Bearing |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Weight | 0.970 kg |
Additional Information 2 | with integrated magnetic sensor ring, with retaining ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Outer diameter | 251 mm |
Thickness | 62.4 mm |
Brake Disc Thickness | 12 mm |
Minimum thickness | 10.8 mm |
Bolt Hole Circle Diameter | 108 mm |
Centering Diameter | 71 mm |
Surface | Coated |
Function | Brake Disc |
Rotor Style | Solid |
Type | Brake Disc Rotor |
Weight | 4.00 kg |
Rim Hole Number | 4 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.4 kg |
Outer diameter | 143 mm |
Thickness | 34.5 mm |
Inner diameter | 30 mm |
Number of Ribs | 5 |
Parameter | 6PK |
Function | Belt Pulley, crankshaft |
Type | Belt Pulley, crankshaft |
for OE number | 038 105 243 M |
Width | 47 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.175 kg |
Length | 418 mm |
Spanner Size | 19 |
Function | Oil sump |
Extra Description | febi Plus |
External Thread Size | M14 x 1,5 |
Type | Oil sump |
Additional Information | with oil drain plug |
Additional Information 2 | with seal ring, with bore for oil-level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil sump (100263)
- 1x Febi Screw Plug, oil sump (15374)
Important compatibility info
Length | 350 mm |
Number of Connectors / Ports | 2 |
Function | Interior Blower |
Weight | 1.718 kg |
Type | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.1 kg |
Material | Plastic |
Colour | Black |
Number of Connectors / Ports | 13 |
Combi Switch Function | with indicator function, with high beam function, with hazard warning light function, with headlight flasher |
Function | Steering Column Switch |
Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.140 kg |
Length | 394 mm |
Height | 33 mm |
Filter type | Pollen Filter |
Function | Filter, cabin air |
Width | 185 mm |
Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023