Important compatibility info
| Length | 51.1 mm |
| Number of Connectors / Ports | 3 |
| Function | Sensor, camshaft position |
| Type | Sensor, camshaft position |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket, oil sump |
| Thickness | 18 mm |
| Material | NBR (nitrile butadiene rubber) |
| Width | 14 mm |
| Length | 1020 mm |
| Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 97 mm |
| Height | 89 mm |
| Width | 107 mm |
| Voltage | 24 V |
| Frequency Range | 420 Hz |
| Operating Mode | Electric |
| Noise Level | 109 dB |
| Signal | Low Tone |
| Type | Signal Horn |
| Function | Signal Horn |
| Power Consumption | 100 W |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Rear Axle Left, Front Axle Right, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Resistance | 1790 Ohm |
| Cable Length | 1309 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 139 mm |
| Width | 58.5 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.5 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Outer diameter | 75 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Connector Shape | Square |
| Housing Colour | Grey |
| External Thread Size | M16 x 1,5 |
| Additional Information 2 | with seal ring, with cable |
| Spanner Size | 22 |
| Number of Connectors / Ports | 1 |
| Cable Length | 200 mm |
| Shifting Points | 0.5 bar |
| Type | Oil Pressure Switch |
| Function | Oil Pressure Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Metal |
| Outer diameter | 70 mm |
| Inner diameter | 10 mm |
| Mounting points diameter | 10 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Slave Cylinder, clutch |
| Type | Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 42212 |
| Function | Tie Rod End |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 175 mm |
| Width | 80 mm |
| Material | Rubber/Metal |
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 16.8 mm |
| Inspection Tag | ECE R90 Approved |
| Wear Warning Contact | with acoustic wear warning |
| Width | 56 mm |
| Length | 131.7 mm |
| Placement on Vehicle | Front Axle |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Coolant Pipe |
| Cooling Hose | from oil cooler to engine block |
| Thickness | 60 mm |
| Width | 50 mm |
| Length | 181 mm |
| Extra Description | febi Plus |
| Type | Coolant Pipe |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Height | 34 mm |
| Material | Rubber/Metal |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
| Inner diameter | 13 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inspection Tag | ECE R90 Approved |
| Function | Brake Pad Set, disc brake |
| Placement on Vehicle | Front Axle |
| Thickness/Strength 1 | 16.6 mm |
| Type | Brake Pad Set, disc brake |
| Wear Warning Contact | with acoustic wear warning |
| Length | 132.6 mm |
| Width | 50.4 mm |
| Additional Information | with retaining spring holder |
| Additional Information 2 | with anti-squeak plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left |
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 27718 |
| External Thread Size | M14 x 1,5, M18 x 1,5 |
| Function | Tie Rod |
| Type | Tie Rod |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (27159)
- 1x Febi Inner Tie Rod (27716)
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 27719 |
| External Thread Size | M14 x 1,5, M18 x 1,5 |
| Function | Tie Rod |
| Type | Tie Rod |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (27158)
- 1x Febi Inner Tie Rod (27716)
Important compatibility info
| Function | Tie Rod |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| External Thread Size | M18 x 1,5 |
| Additional Information | with nuts |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with clamps, with steering bellow |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod (43779)
- 1x Febi Bellow Kit, steering (43552)
Important compatibility info
| Housing material | Aluminium |
| Extra Description | ProKit |
| Height | 99 mm |
| Width | 122 mm |
| Rated Power | 12 W |
| Light Design | LED |
| Mounting Type | Fully assembled |
| Cable Length | 1500 mm |
| Depth | 78 mm |
| Voltage from | 9 V |
| Light Distribution | Long-range illumination |
| Voltage to | 32 V |
| Protection Type (IP Code) | IP6K9K |
| Fulfils ECE norm | R10 |
| Lumen | 1200 lm |
| Temperature range from | -40 °C |
| Temperature range to | 60 °C |
| Function | Worklight |
| Additional Information | with fastening/mounting material |
| Inspection Tag | EMC |
| Type | Worklight |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right Rear |
| Length | 2070 mm |
| Paired article numbers | 108710 |
| Type | Cable Pull, parking brake |
| Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left Rear |
| Length | 2080 mm |
| Paired article numbers | 108709 |
| Type | Cable Pull, parking brake |
| Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Function | Equalising reservoir, hydraulic oil (power steering) |
| Type | Equalising reservoir, hydraulic oil (power steering) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gas Spring, boot/cargo area |
| Placement on Vehicle | both sides |
| Length | 279 mm |
| Housing Diameter | 19 mm |
| Eject Force | 700 N |
| Stroke | 64 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Housing length | 204 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 5 mm |
| Function | Fuel Hose |
| Suited for fuel type | Ethanol Blended Petrol (E10) |
| Type | Fuel Hose |
| Length | 230 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 301 mm |
| Outer diameter | 142 mm |
| Function | Suspension Spring |
| Type | Suspension Spring |
| Wire Diameter | 11.3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Number of Connectors / Ports | 3 |
| Brake Type | Disc Brake |
| Cable Length | 2920 mm |
| Type | Warning Contact, brake pad wear |
| Function | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Aluminium |
| Outer diameter | 96 mm |
| Thickness | 96 mm |
| Inner diameter | 19 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 12 mm |
| Outer diameter | 82 mm |
| Height | 100 mm |
| Function | Mounting, support frame/subframe |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Mounting, support frame/subframe |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023





























