Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.570 kg |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 23236 |
| Rod/Strut | Coupling Rod |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.58
Important compatibility info
| Material | Rubber/Metal |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Weight | 0.382 kg |
| Inner diameter | 10.8 mm |
| Additional Information 2 | without ball bearing |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.58
Important compatibility info
| Control Type | Rocker Actuation |
| Weight | 0.022 kg |
| Number of Connectors / Ports | 6 |
| Placement on Vehicle | Driver side |
| Function | Switch, window regulator |
| Type | Switch, window regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.59
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Sensor, crankshaft pulse |
| Weight | 0.05 kg |
| Type | Sensor, crankshaft pulse |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.59
Important compatibility info
| Weight | 0.600 kg |
| Function | Slave Cylinder, clutch |
| Type | Slave Cylinder, clutch |
| for OE number | 202 290 00 11 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.59
Important compatibility info
| Weight | 2.199 kg |
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 14.8 mm |
| Inspection Tag | ECE R90 Approved |
| Wear Warning Contact | with acoustic wear warning |
| Length | 131.8 mm |
| Placement on Vehicle | Front Axle |
| Width | 77.3 mm |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.60
Important compatibility info
| Weight | 0.030 kg |
| Chemical Properties | Elastic |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 3 |
| Length | 628 mm |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.61
Important compatibility info
| Weight | 0.322 kg |
| Placement on Vehicle | Right |
| Length | 674 mm |
| Paired article numbers | 24710 |
| Housing Diameter | 18 mm |
| Eject Force | 330 N |
| Stroke | 293 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, bonnet |
| Function | Gas Spring, bonnet |
| Housing length | 368.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.61
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Sensor, oil pressure |
| Weight | 0.114 kg |
| Type | Sensor, oil pressure |
| for OE number | 50 10 311 026 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.61
Important compatibility info
| Function | Sensor, wheel speed |
| Length | 2700 mm |
| Weight | 0.1755 kg |
| Placement on Vehicle | Front Axle Left, Rear Axle Left, Front Axle Right, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Resistance | 1150 Ohm |
| Cable Length | 2620 mm |
| Type | Sensor, wheel speed |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.61
Important compatibility info
| Weight | 0.240 kg |
| Length | 1626 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 10 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.61
Important compatibility info
| Function | Brake Hose |
| Length | 220 mm |
| Placement on Vehicle | Rear Axle Right |
| Weight | 0.143 kg |
| External Thread Size | M10 x 1 |
| Type | Brake Hose |
| Additional Information 2 | with banjo bolt |
| Paired article numbers | 45213 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.61
Important compatibility info
| Function | Sealing Cap, tank unit (Urea injection) |
| Outer diameter | 40 mm |
| Colour | Blue |
| Weight | 0.107 kg |
| Type | Sealing Cap, tank unit (Urea injection) |
| Lock System | with lock, with two keys |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.61
Important compatibility info
| Weight | 0.212 kg |
| Type | Brake Hose |
| Paired article numbers | 180226 |
| Length | 535 mm |
| Placement on Vehicle | Front Axle Left |
| Function | Brake Hose |
| Internal Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.61
Important compatibility info
| Weight | 0.400 kg |
| Function | Slave Cylinder, clutch |
| Type | Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.61
Important compatibility info
| Number of Teeth | 18 |
| Engine Management | Timing Chain |
| Function | Sprocket, crankshaft |
| Weight | 0.174 kg |
| Type | Sprocket, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.61
Important compatibility info
| Placement on Vehicle | outer, Rear Axle Right |
| Length | 310 mm |
| Paired article numbers | 195087 |
| Weight | 0.146 kg |
| Type | Brake Hose |
| Function | Brake Hose |
| External Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.61
Important compatibility info
| Function | Sensor, wheel speed |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Cable Length | 976 mm |
| Type | Sensor, wheel speed |
| Weight | 0.055 kg |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.61
Important compatibility info
| Internal Thread Size | M16 x 1,5 |
| Weight | 0.81 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 202 mm |
| Spanner Size | 21 |
| Function | Tie Rod End |
| External Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.61
Important compatibility info
| Length | 1722 mm |
| Function | Cable Pull, parking brake |
| Placement on Vehicle | Rear |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.61
Important compatibility info
| Weight | 0.052 kg |
| Colour | Black |
| Number of Connectors / Ports | 2 |
| Function | Sensor, coolant temperature |
| Type | Sensor, coolant temperature |
| for OE number | 20576617 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.61
Important compatibility info
| Weight | 0.306 kg |
| Placement on Vehicle | both sides |
| Length | 680 mm |
| Housing Diameter | 18 mm |
| Eject Force | 200 N |
| Stroke | 262 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, bonnet |
| Housing length | 377 mm |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.61
Important compatibility info
| Weight | 2.770 kg |
| Placement on Vehicle | Front Axle |
| Length | 169.2 mm |
| Width | 73.1 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 20.3 mm |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with fastening material |
| Type | Brake Pad Set, disc brake |
| Wear Warning Contact | prepared for wear warning indicator |
| Model | CRAFTER SPRINTER |
| Manufacturer | MERCEDES VOLKSWAGEN |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.61
Important compatibility info
| Weight | 4.15 kg |
| Inner diameter | 153.5 mm |
| Length | 1 m |
| Function | Corrugated Pipe, exhaust system |
| Type | Corrugated Pipe, exhaust system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.61
Important compatibility info
| Length | 1055 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Weight | 0.093 kg |
| Alternator type | for starter generator |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
| Tensile Cord Material | Aramid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.61
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 7 |
| Weight | 0.117 kg |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
| Length | 1240 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.61
Important compatibility info
| Type | V-Ribbed Belt |
| Weight | 0.124 kg |
| Number of Ribs | 6 |
| Alternator type | for starter generator |
| Function | V-Ribbed Belt |
| Tensile Cord Material | Aramid |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 1325 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.61
Important compatibility info
| Placement on Vehicle | Front Axle Left, transmission sided, Wheel Side |
| Length | 100 mm |
| Material | Thermoplastic polyester elastomer |
| Inner diameter 1 | 25 mm |
| Inner diameter 2 | 67 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Weight | 0.153 kg |
| Joint Type | Tripod Joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (186187)
- 1x Febi Molybdenum Grease (02582)
£22.61
Important compatibility info
| Weight | 0.55 kg |
| Placement on Vehicle | Left |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | 5934176 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.61
Important compatibility info
| Housing length | 389.5 mm |
| Mounting points diameter | 18 mm |
| Weight | 0.332 kg |
| Placement on Vehicle | Left |
| Length | 722 mm |
| Eject Force | 180 N |
| Stroke | 306 mm |
| Housing Diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, bonnet |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.61
Important compatibility info
| Number of Ribs | 5 |
| Tensile Cord Material | Aramid |
| Weight | 0.110 kg |
| Alternator type | for starter generator |
| Type | V-Ribbed Belt |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 1495 mm |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.61
Important compatibility info
| Placement on Vehicle | outer, Rear Axle Left |
| Length | 310 mm |
| Paired article numbers | 195088 |
| Weight | 0.146 kg |
| Type | Brake Hose |
| Function | Brake Hose |
| External Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.61
Important compatibility info
| Additional Information | without bulb |
| Placement on Vehicle | Left Front |
| Paired article numbers | 195966 |
| Weight | 0.15 kg |
| Cable Length | 630 mm |
| Type | Direction Indicator |
| Fulfils ECE norm | R6, R91 |
| Function | Direction Indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.61
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 668 mm |
| Housing Diameter | 18 mm |
| Eject Force | 360 N |
| Stroke | 275 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 369.5 mm |
| Weight | 0.312 kg |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.61
Important compatibility info
| Type | Spring, driver cab suspension |
| Thickness | 252 mm |
| Placement on Vehicle | Front, Rear |
| Outer diameter | 87 mm |
| Function | Spring, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.61
Important compatibility info
| Weight | 0.396 kg |
| Placement on Vehicle | Left |
| Length | 674 mm |
| Paired article numbers | 24719 |
| Housing Diameter | 18 mm |
| Eject Force | 300 N |
| Stroke | 293 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, bonnet |
| Function | Gas Spring, bonnet |
| Housing length | 362.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.61
Important compatibility info
| Weight | 0.872 kg |
| Placement on Vehicle | Rear Axle |
| Length | 123.2 mm |
| Width | 53.3 mm. 48.4 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 13.7 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.61
Important compatibility info
| Inner diameter | 7.1 mm. 8.7 mm |
| Number of mounting bores | 34 |
| Thickness | 0.4 mm |
| Function | Gasket, oil sump |
| Weight | 0.062 kg |
| Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.61
Important compatibility info
| Type | Air Filter |
| Weight | 0.705 kg |
| Filter type | Filter Insert |
| Height | 454 mm |
| Outer diameter | 155 mm |
| Inner diameter | 134 mm |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.61
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Weight | 0.060 kg |
| Cable Length | 1135 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.61
Important compatibility info
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Weight | 0.539 kg |
| Length | 1833 mm |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.61
Important compatibility info
| Weight | 0.250 kg |
| Placement on Vehicle | both sides |
| Length | 658 mm |
| Housing Diameter | 18 mm |
| Eject Force | 410 N |
| Stroke | 271 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 366.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.61
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 155.2 mm |
| Width | 72 mm. 66.7 mm |
| Wear Warning Contact | excl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 18.9 mm. 19.9 mm |
| Function | Brake Pad Set, disc brake |
| Weight | 2.54 kg |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.62
Important compatibility info
| Placement on Vehicle | both sides |
| Housing Diameter | 19 mm |
| Eject Force | 420 N |
| Stroke | 219 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 292.5 mm |
| Length | 549 mm |
| Weight | 0.337 kg |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.62
Important compatibility info
| Weight | 0.37 kg |
| Placement on Vehicle | Front Axle Left, Lower, Front, Front Axle Right |
| Outer diameter | 66 mm |
| Thickness | 60 mm |
| Inner diameter | 14 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, control/trailing arm |
| Material | Rubber/Metal |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.62
Important compatibility info
| Weight | 0.328 kg |
| Type | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Rear Axle |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.62
Important compatibility info
| Function | Gasket Set, cylinder head cover |
| Material | ACM (Polyacrylate) |
| Paired article numbers | 34796 |
| Placement on Vehicle | Right |
| Weight | 0.185 kg |
| Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.62
Important compatibility info
| Width | 20 mm |
| Outer diameter | 47 mm |
| Inner diameter | 18 mm |
| Bolt Hole Circle Diameter | 12 mm |
| Paired article numbers | 36820 |
| Weight | 0.761 kg |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Left |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
| Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.62
Important compatibility info
| Weight | 0.24 kg |
| Steering arm type | Control Arm |
| Function | Camber Correction Screw |
| Type | Camber Correction Screw |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Camber Correction Screw (177921)
- 1x Febi Fastening Bolt, control arm (173406)
- 1x Febi Washer (177872)
- 2x Febi Nut (14392)
£22.62
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 102.1 mm |
| Width | 44.5 mm |
| Additional Information 2 | with anti-squeak plate |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Weight | 0.936 kg |
| Thickness/Strength 1 | 16.8 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.62
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023