Important compatibility info
Weight | 2.83 kg |
Outer diameter | 136.5 mm |
Thickness | 164 mm |
Inner diameter | 110 mm |
Colour | Silver |
Thread Type | with right-hand thread |
Function | Air Dryer Cartridge, compressed-air system |
Internal Thread Size | M39 x 1,5 |
Type | Air Dryer Cartridge, compressed-air system |
Additional Information 2 | with integrated oil separator, with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 40 mm |
Outer diameter | 74 mm |
Inner diameter | 40 mm |
Bearing Type | Angular Ball Bearing |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Weight | 0.922 kg |
Additional Information 2 | with retaining ring |
Additional Information | with nuts, with drive shaft bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Nut (05139)
- 1x Febi Nut (15902)
- 1x Febi Nut (14392)
- 1x Febi Screw (05919)
Important compatibility info
Weight | 0.612 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Repair Kit, suspension strut support mount |
Additional Information 2 | with fastening material, with ball bearing |
Extra Description | ProKit |
Type | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (37166)
- 1x Febi Rolling Bearing, suspension strut support mount (10091)
- 1x Febi Nut (37805)
- 1x Febi Nut (37801)
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 368 mm |
Outer diameter | 141 mm |
Weight | 1.53 kg |
Type | Suspension Spring |
Function | Suspension Spring |
Wire Diameter | 11.3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Eject Force | 555 N |
Stroke | 166 mm |
Weight | 0.3 kg |
Placement on Vehicle | both sides |
Length | 448 mm |
Housing length | 246.5 mm |
Function | Gas Spring, boot/cargo area |
Piston conrod diameter | 8 mm |
Housing Diameter | 19 mm |
Mounting points diameter | 16.5 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.19 kg |
Function | Seal Ring, wheel hub |
Type | Seal Ring, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Function | Bushing, axle beam |
Type | Bushing, axle beam |
Inner diameter | 12 mm |
Weight | 0.545 kg |
Thickness | 100 mm |
Outer diameter | 80 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.02 kg |
Colour | Grey |
Number of Connectors / Ports | 3 |
Switch Point | 120 °C |
Function | Sensor, coolant temperature |
Type | Sensor, coolant temperature |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Material | Rubber/Metal |
Paired article numbers | 102286 |
Function | Suspension Strut Support Mount |
Weight | 0.98 kg |
Type | Suspension Strut Support Mount |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing length | 480.5 mm |
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Piston conrod diameter | 10 mm |
Mounting points diameter | 18 mm |
Stroke | 309 mm |
Eject Force | 640 N |
Housing Diameter | 22 mm |
Weight | 0.3 kg |
Length | 849 mm |
Placement on Vehicle | Left Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Gasket, thermostat housing |
Type | Gasket, thermostat housing |
Material | Silicone |
Thickness | 5.5 mm |
Width | 160 mm |
Weight | 0.012 kg |
Length | 117 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Paired article numbers | 102287 |
Function | Suspension Strut Support Mount |
Weight | 0.98 kg |
Placement on Vehicle | Front Axle Right |
Type | Suspension Strut Support Mount |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.078 kg |
Placement on Vehicle | Rear Axle Right |
Paired article numbers | 107630 |
Number of Connectors / Ports | 2 |
Cable Length | 971 mm |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.283 kg |
Length | 96 mm |
Material | Rubber/Metal |
Outer diameter | 67 mm |
Inner diameter | 24 mm |
Function | Bushing, leaf spring |
Placement on Vehicle | Front Axle |
Type | Bushing, leaf spring |
Shape/Form | slotted |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.840 kg |
Placement on Vehicle | Front Axle |
Length | 210 mm |
Width | 102 mm |
Thread Length | 70 mm |
Function | Spring Clamp |
External Thread Size | M24 x 3 |
Type | Spring Clamp |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Centre, Left |
Paired article numbers | 177932 |
Weight | 0.40 kg |
Type | Roller Guide, sliding door |
Function | Roller Guide, sliding door |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.670 kg |
Placement on Vehicle | Front Axle |
Length | 129.3 mm |
Width | 57 mm |
Wear Warning Contact | excl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17.6 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Length | 585 mm |
Housing Diameter | 22 mm |
Eject Force | 700 N |
Stroke | 250 mm |
Piston conrod diameter | 10 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 316.5 mm |
Weight | 0.500 kg |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.500 kg |
External Thread Size | M14 x 1,5 |
Placement on Vehicle | Upper, Front Axle Left, Front Axle Right |
Cone Size | 17.8 mm |
Mounting points diameter | 8.1 mm |
Type | Ball Joint |
Function | Ball Joint |
Additional Information 2 | with crown nut |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.663 kg |
Placement on Vehicle | Front Axle |
Length | 139.8 mm |
Width | 68.9 mm |
Wear Warning Contact | incl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 18.5 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information 2 | with anti-squeak plate, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023