Important compatibility info
| Function | Sensor, wheel speed |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 985 mm |
| Number of Connectors / Ports | 2 |
| Cable Length | 880 mm |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Replaces | 48663 |
| Height | 208 mm. 227 mm |
| Filter type | Filter Insert |
| Seal Diameter | 108 mm. 98 mm |
| Outer diameter 1 | 96 mm |
| Outer diameter 2 | 86 mm |
| Type | Fuel filter set |
| Function | Fuel filter set |
| Additional Information | with gaskets/seals |
Additional Information
Technical Information
This article is only allowed to be used for Biodiesel up to Blend class B20 and less (e.g. B5, B7, B10,...).
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 253 mm |
| Height | 40 mm |
| Width | 134 mm |
| Filter type | Activated Carbon Filter |
| Function | Filter Set, cabin air |
| Type | Filter Set, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Gasket Set, cylinder head cover |
| Function | Gasket Set, cylinder head cover |
| Material | NBR (nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with adjuster |
| Type | Tailgate Lock |
| Function | Tailgate Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 374 mm |
| Height | 41 mm |
| Width | 181 mm |
| Additional Information 2 | with pre-filter |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | V-Ribbed Belt |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 7 |
| Length | 2035 mm |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Oil Dipstick, automatic transmission |
| Function | Oil Dipstick, automatic transmission |
| Extra Description | febi Plus |
| Transmission ID | 722.9 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 1360 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 7 |
| Type | V-Ribbed Belt |
| One-sided / Double-sided | Double-sided |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower |
| Material | Rubber |
| Outer diameter | 45 mm. 32 mm |
| Inner diameter | 35 mm. 24 mm |
| Colour | Black |
| Cooling Hose | from engine cooler to water pump |
| Function | Radiator Hose |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing length | 390.5 mm |
| Function | Gas Spring, bonnet |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Eject Force | 350 N |
| Stroke | 308 mm |
| Length | 730 mm |
| Placement on Vehicle | Right |
| Housing Diameter | 18 mm |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 17.4 mm |
| Outer diameter | 26.2 mm |
| Function | Connector, washer-fluid pipe |
| Type | Connector, washer-fluid pipe |
| Mounting points diameter | 6.5 mm |
| Number of mounting bores | 3 |
| Additional Information 2 | with lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 169 mm |
| Outer diameter | 91 mm |
| Filter type | In-Line Filter, with water drain screw |
| Type | Fuel filter |
| Function | Fuel filter |
| Housing material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber/Metal |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Inner diameter | 10.8 mm |
| Additional Information 2 | without ball bearing |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | 11 42 2 246 091 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
| Inner diameter | 90 mm |
| Outer diameter | 110 mm |
| Material | FPM (fluoride rubber), PTFE (polytetrafluoroethylene) |
| Width | 8 mm |
| Placement on Vehicle | transmission sided |
| Additional Information 2 | with mounting sleeve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Tie Rod |
| External Thread Size | M12 x 1,25 |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (12025)
- 1x Febi Tie Rod End (11281)
Important compatibility info
| Width | 24 mm |
| Number of Teeth | 168 |
| Belts | with trapezoidal tooth profile |
| Type | Timing Belt |
| Function | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 14.8 mm |
| Inspection Tag | ECE R90 Approved |
| Wear Warning Contact | with acoustic wear warning |
| Length | 131.8 mm |
| Placement on Vehicle | Front Axle |
| Width | 77.3 mm |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Cable Length | 525 mm |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cooling Hose | from radiator to water pipe |
| Inner diameter 2 | 34 mm |
| Function | Radiator Hose |
| Inner diameter 1 | 30 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 230 mm |
| Height | 42 mm |
| Width | 218 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Additional Information 2 | with pre-filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with squeeze connector |
| Additional Information 2 | with plug |
| Number of Connectors / Ports | 2 |
| Cable Length | 250 mm |
| Type | Plug |
| Cross Section | 0.75 mm² |
| Function | Plug |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle, Upper |
| Material | Rubber/Metal |
| Outer diameter | 114 mm |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Height | 49 mm |
| Additional Information 2 | with ball bearing |
| Inner diameter | 14 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 169.2 mm |
| Width | 73.1 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 20.3 mm |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with fastening material |
| Type | Brake Pad Set, disc brake |
| Wear Warning Contact | prepared for wear warning indicator |
| Model | CRAFTER SPRINTER |
| Manufacturer | MERCEDES VOLKSWAGEN |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Outer diameter | 129 mm |
| Thickness | 31 mm |
| Inner diameter | 6.5 mm. 38 mm |
| Number of Ribs | 6 |
| Function | Belt Pulley, water pump |
| Extra Description | febi Plus |
| Type | Belt Pulley, water pump |
| Hole Spacing | 54 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket, cylinder head cover |
| Material | Rubber |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 635 mm |
| Outer diameter | 8 mm |
| Inner diameter | 4 mm |
| Pressure | 240 bar |
| Function | Hose Line, driver cab tilting device |
| Internal Thread Size | M12 x 1,5 |
| Type | Hose Line, driver cab tilting device |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023





























