Important compatibility info
Type | Splash Guard, brake disc |
Placement on Vehicle | Rear Axle Left |
Extra Description | febi Plus |
Function | Splash Guard, brake disc |
Paired article numbers | 174235 |
Weight | 0.364 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.350 kg |
Placement on Vehicle | both sides |
Length | 516 mm |
Housing Diameter | 19 mm |
Eject Force | 290 N |
Stroke | 206 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, bonnet |
Housing length | 289 mm |
Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.340 kg |
Height | 203 mm |
Outer diameter | 109 mm |
Function | Fuel filter |
Gasket outer diameter | 127.4 mm |
Gasket inner diameter | 116.5 mm |
Type | Fuel filter |
Additional Information 2 | with seal ring |
Filter type | Filter Insert |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.069 kg |
Additional Information 2 | with fastening material |
Placement on Vehicle | Rear Axle |
Length | 99 mm |
Width | 55.8 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17.1 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.05 kg |
Inner diameter | 17.4 mm |
Outer diameter | 26.2 mm |
Function | Connector, washer-fluid pipe |
Type | Connector, washer-fluid pipe |
Mounting points diameter | 6.5 mm |
Number of mounting bores | 3 |
Additional Information 2 | with lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.19 kg |
Function | Seal Ring, wheel hub |
Type | Seal Ring, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Eject Force | 555 N |
Stroke | 166 mm |
Weight | 0.3 kg |
Placement on Vehicle | both sides |
Length | 448 mm |
Housing length | 246.5 mm |
Function | Gas Spring, boot/cargo area |
Piston conrod diameter | 8 mm |
Housing Diameter | 19 mm |
Mounting points diameter | 16.5 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 368 mm |
Outer diameter | 141 mm |
Weight | 1.53 kg |
Type | Suspension Spring |
Function | Suspension Spring |
Wire Diameter | 11.3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Paired article numbers | 102287 |
Function | Suspension Strut Support Mount |
Weight | 0.98 kg |
Placement on Vehicle | Front Axle Right |
Type | Suspension Strut Support Mount |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing length | 480.5 mm |
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Piston conrod diameter | 10 mm |
Mounting points diameter | 18 mm |
Stroke | 309 mm |
Eject Force | 640 N |
Housing Diameter | 22 mm |
Weight | 0.3 kg |
Length | 849 mm |
Placement on Vehicle | Left Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Gasket, thermostat housing |
Type | Gasket, thermostat housing |
Material | Silicone |
Thickness | 5.5 mm |
Width | 160 mm |
Weight | 0.012 kg |
Length | 117 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cooling Hose | from radiator to water pipe |
Inner diameter 2 | 34 mm |
Function | Radiator Hose |
Weight | 0.412 kg |
Inner diameter 1 | 30 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Material | Rubber/Metal |
Paired article numbers | 102286 |
Function | Suspension Strut Support Mount |
Weight | 0.98 kg |
Type | Suspension Strut Support Mount |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.840 kg |
Placement on Vehicle | Front Axle |
Length | 210 mm |
Width | 102 mm |
Thread Length | 70 mm |
Function | Spring Clamp |
External Thread Size | M24 x 3 |
Type | Spring Clamp |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Centre, Left |
Paired article numbers | 177932 |
Weight | 0.40 kg |
Type | Roller Guide, sliding door |
Function | Roller Guide, sliding door |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Length | 585 mm |
Housing Diameter | 22 mm |
Eject Force | 700 N |
Stroke | 250 mm |
Piston conrod diameter | 10 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 316.5 mm |
Weight | 0.500 kg |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.080 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 1425 mm |
Number of Connectors / Ports | 2 |
Resistance | 1190 Ohm |
Cable Length | 1315 mm |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 96591467 |
Type | Expansion Tank, coolant |
Material | Plastic |
Weight | 0.4 kg |
Function | Expansion Tank, coolant |
Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.500 kg |
External Thread Size | M14 x 1,5 |
Placement on Vehicle | Upper, Front Axle Left, Front Axle Right |
Cone Size | 17.8 mm |
Mounting points diameter | 8.1 mm |
Type | Ball Joint |
Function | Ball Joint |
Additional Information 2 | with crown nut |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.64 kg |
Function | Expansion Tank, coolant |
Type | Expansion Tank, coolant |
Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.41 kg |
Placement on Vehicle | Front Axle Left, Lower, Front, inner, Front Axle Right |
Length | 73 mm |
Width | 73 mm |
Material | Rubber/Metal |
Outer diameter | 73 mm |
Thickness | 60 mm |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.672 kg |
Placement on Vehicle | Front Axle, Right Rear, Upper |
Steering arm type | Control Arm |
Paired article numbers | 27265 |
Material | Aluminium |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.672 kg |
Placement on Vehicle | Front Axle Left, Rear, Upper |
Steering arm type | Control Arm |
Paired article numbers | 27264 |
Material | Aluminium |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with rubber-metal mounts |
Material | Sheet Steel |
Inner diameter | 14 mm |
Placement on Vehicle | Upper, Rear, Rear Axle Left, Rear Axle Right |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Weight | 1.652 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.185 kg |
Placement on Vehicle | Front Axle |
Length | 145 mm |
Width | 85 mm |
Material | Rubber/Metal |
Type | Rubber Buffer, suspension |
Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | PTFE (polytetrafluoroethylene) |
Weight | 0.148 kg |
Placement on Vehicle | transmission sided |
Inner diameter | 80 mm |
Function | Shaft Seal, crankshaft |
Type | Shaft Seal, crankshaft |
Additional Information 2 | with flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | 175159 |
Cone Size | 16 mm |
Material | Aluminium |
Steering arm type | Control Arm |
Placement on Vehicle | Rear, Upper, Front Axle Right |
Weight | 0.445 kg |
Additional Information 2 | with ball joint, with rubber mount |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Length | 313 mm |
Housing Diameter | 19 mm |
Eject Force | 640 N |
Stroke | 95 mm |
Mounting points diameter | 15 mm |
Piston conrod diameter | 10 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 194 mm |
Weight | 0.295 kg |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | PU (Polyurethane) |
Weight | 0.05 kg |
Function | Dust Cover Kit, shock absorber |
Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (12541)
- 2x Febi Protective Cap/Bellow, shock absorber (12482)
Important compatibility info
Weight | 0.03 kg |
Placement on Vehicle | Rear, Lower, Front Axle Left, Front Axle Right, inner |
Outer diameter | 45 mm |
Thickness | 90 mm |
Inner diameter | 18 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023