Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.046 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Cable Length | 565 mm |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Weight | 0.122 kg |
| Length | 361 mm |
| Eject Force | 100 N |
| Stroke | 138 mm |
| Housing length | 195.5 mm |
| Placement on Vehicle | both sides |
| Housing Diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, rear window |
| Type | Gas Spring, rear window |
| Mounting points diameter | 16.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Weight | 0.740 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 39 mm |
| Outer diameter | 74 mm |
| Inner diameter | 39 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with retaining ring |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (04852)
- 1x Febi Circlip (04015)
- 1x Febi Nut, kingpin (22953)
£23.12
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 473 mm |
| Housing Diameter | 18 mm |
| Eject Force | 540 N |
| Stroke | 162 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 279 mm |
| Weight | 0.236 kg |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Function | Gas Spring, boot/cargo area |
| Mounting points diameter | 17.8 mm |
| Weight | 0.19 kg |
| Housing Diameter | 18 mm |
| Eject Force | 160 N |
| Piston conrod diameter | 8 mm |
| Stroke | 142 mm |
| Length | 387 mm |
| Housing length | 214.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Weight | 0.181 kg |
| Placement on Vehicle | both sides |
| Length | 284 mm |
| Housing Diameter | 19 mm |
| Eject Force | 720 N |
| Stroke | 87 mm |
| Mounting points diameter | 16.5 mm. 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, bonnet |
| Housing length | 165 mm |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Outer diameter | 58 mm |
| Additional Information | with gasket/seal, with quick coupling |
| Turbocharger line | Charge air cooler to intake manifold |
| Outer diameter 1 | 65 mm |
| Function | Charge Air Hose |
| Inner diameter | 49 mm |
| Weight | 0.18 kg |
| Type | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Weight | 0.51 kg |
| Material | Rubber/Metal |
| Type | Gasket, cylinder head cover |
| Function | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Length | 635 mm |
| Outer diameter | 8 mm |
| Inner diameter | 4 mm |
| Pressure | 240 bar |
| Function | Hose Line, driver cab tilting device |
| Internal Thread Size | M12 x 1,5 |
| Weight | 0.90 kg |
| Type | Hose Line, driver cab tilting device |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Weight | 0.020 kg |
| Length | 51.1 mm |
| Number of Connectors / Ports | 3 |
| Function | Sensor, camshaft position |
| Type | Sensor, camshaft position |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Colour | Black |
| Material | Plastic |
| Type | Oil Separator, crankcase ventilation |
| for OE number | 03C 103 464 D |
| Weight | 0.047 kg |
| Function | Oil Separator, crankcase ventilation |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Additional Information | with gaskets/seals |
| Number of grooves | 8 |
| Function | Oil Cooler, engine oil |
| Weight | 0.324 kg |
| Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Outer diameter | 159 mm |
| Inner diameter | 136 mm |
| Width | 13 mm |
| Placement on Vehicle | frontal sided |
| Function | Shaft Seal, crankshaft |
| Material | FPM (fluoride rubber) |
| Weight | 0.195 kg |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 286.5 mm |
| Placement on Vehicle | both sides |
| Eject Force | 460 N |
| Length | 493 mm |
| Stroke | 168 mm |
| Housing Diameter | 18 mm |
| Weight | 0.24 kg |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Weight | 0.87 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Replaces | 22910 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Weight | 0.391 kg |
| Placement on Vehicle | Upper Left |
| Cooling Hose | from engine to engine cooler |
| Function | Radiator Hose |
| Additional Information 2 | with quick couplers |
| Type | Radiator Hose |
| for OE number | 204 501 31 82 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Weight | 0.532 kg |
| Placement on Vehicle | Left Front |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Material | Rubber/Metal |
| Inner diameter | 10 mm |
| Placement on Vehicle | Rear Axle |
| Weight | 0.698 kg |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Height | 47 mm |
| Outer diameter | 70 mm. 125 mm |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Placement on Vehicle | Rear |
| Length | 1680 mm |
| Function | Cable Pull, parking brake |
| Weight | 1.350 kg |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Weight | 0.126 kg |
| Material | Plastic |
| Colour | Black |
| Combi Switch Function | with wipe-wash function, with wipe interval function |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Function | Sensor, wheel speed |
| Weight | 0.056 kg |
| Type | Sensor, wheel speed |
| Paired article numbers | 175336 |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Weight | 0.361 kg |
| Function | V-Ribbed Belt |
| Length | 2347 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Additional Information 2 | with quick couplers |
| Hose Length | 380 mm |
| Weight | 0.165 kg |
| Cooling Hose | from thermostat to radiator |
| Function | Radiator Hose |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | Radiator Hose |
| Placement on Vehicle | Lower Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Weight | 0.35 kg |
| Length | 483 mm |
| Placement on Vehicle | both sides |
| Stroke | 146 mm |
| Mounting points diameter | 18 mm |
| Housing length | 303.5 mm |
| Housing Diameter | 22 mm |
| Function | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Eject Force | 700 N |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Function | Gasket Set, cylinder head cover |
| Material | NBR (nitrile butadiene rubber), ACM (Polyacrylate) |
| Weight | 0.078 kg |
| Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gasket, cylinder head cover (107984)
£23.12
Important compatibility info
| Weight | 0.252 kg |
| Length | 2475 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Weight | 0.581 kg |
| Length | 73 mm |
| Outer diameter | 78 mm |
| Paired article numbers | 23318 |
| Placement on Vehicle | Rear Axle Left |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Weight | 0.831 kg |
| Seal Material | Paper |
| Number of Teeth | 20 |
| Material | Cast Aluminium |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| for OE number | 1201.61 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Tightening Torque | 25 Nm |
| Function | Cap, oil filter housing |
| Height | 61.4 mm |
| Weight | 0.125 kg |
| Outer diameter | 87.4 mm |
| Extra Description | febi Plus |
| Type | Cap, oil filter housing |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Weight | 1.120 kg |
| Type | Bushing, axle beam |
| Placement on Vehicle | Rear Axle Left, Front |
| Material | Rubber/Metal |
| Paired article numbers | 11782 |
| Function | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Housing length | 130.5 mm |
| Mounting points diameter | 18 mm |
| Weight | 0.147 kg |
| Placement on Vehicle | both sides |
| Length | 223 mm |
| Eject Force | 500 N |
| Stroke | 71 mm |
| Housing Diameter | 19 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.12
Important compatibility info
| Material | PU (Polyurethane) |
| Weight | 0.45 kg |
| Placement on Vehicle | Rear Axle |
| Thickness | 122 mm |
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.13
Important compatibility info
| Additional Information 2 | with fastening material |
| Weight | 2.2 kg |
| Placement on Vehicle | Front Axle |
| Length | 150.9 mm |
| Width | 61.5 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 18 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.13
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 354 mm |
| Outer diameter | 55 mm |
| Weight | 1.48 kg |
| Number of Coils | 7.5 |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Wire Diameter | 10.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.13
Important compatibility info
| Length | 196 mm |
| Paired article numbers | 181317 |
| Type | Brake Hose |
| Weight | 0.132 kg |
| Placement on Vehicle | Rear Axle Right, outer |
| Function | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.13
Important compatibility info
| Weight | 0.950 kg |
| Placement on Vehicle | Rear Axle |
| Length | 123.1 mm |
| Width | 48.3 mm. 43.8 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.13
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Weight | 0.330 kg |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.14
Important compatibility info
| Placement on Vehicle | Right |
| Paired article numbers | 176563 |
| Extra Description | febi Plus |
| Function | Washer Fluid Jet, headlight cleaning |
| Type | Washer Fluid Jet, headlight cleaning |
| Weight | 0.149 kg |
| Additional Information | with lift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.15
Important compatibility info
| Inner diameter 1 | 57 mm |
| Inner diameter 2 | 64 mm |
| Cooling Hose | from engine to engine cooler |
| Function | Radiator Hose |
| Weight | 0.9 kg |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.15
Important compatibility info
| Extra Description | febi Plus |
| Function | Washer Fluid Jet, headlight cleaning |
| Type | Washer Fluid Jet, headlight cleaning |
| Weight | 0.149 kg |
| Paired article numbers | 176567 |
| Placement on Vehicle | Left |
| Additional Information | with lift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.15
Important compatibility info
| Weight | 0.270 kg |
| Length | 2100 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.15
Important compatibility info
| Weight | 0.804 kg |
| Material | Grey Cast Iron |
| Number of Teeth | 27 |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.15
Important compatibility info
| Length | 2050 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 10 |
| Weight | 0.256 kg |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.15
Important compatibility info
| Inner diameter | 5 mm |
| Function | Fuel Hose |
| Suited for fuel type | Ethanol Blended Petrol (E10) |
| Type | Fuel Hose |
| Weight | 0.02 kg |
| Length | 230 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.16
Important compatibility info
| Length | 120 mm |
| Paired article numbers | 21037 |
| Thread Type | with right-hand thread |
| Placement on Vehicle | Front Axle, Rear Axle |
| External Thread Size | M27 x 1,5, M30 x 1,5 RHT |
| Weight | 1.750 kg |
| Pipe Diameter | 40 mm |
| Cone Size | 32 mm |
| Extra Description | ProKit |
| Type | Angled Ball Joint, steering push rod / Tie Rod End |
| Function | Angled Ball Joint, steering push rod / Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (27481)
- 1x Febi Nut (26529)
£23.16
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Weight | 1.023 kg |
| Placement on Vehicle | Left Front |
| Type | Mounting, engine |
| for OE number | 56 84 047 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.16
Important compatibility info
| Length | 1190 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Tensile Cord Material | Aramid |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
| Alternator type | for starter generator |
| Weight | 0.113 kg |
| Number of Ribs | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.16
Important compatibility info
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Housing length | 295.5 mm |
| Mounting points diameter | 18 mm |
| Stroke | 217 mm |
| Eject Force | 460 N |
| Housing Diameter | 18 mm |
| Weight | 0.2 kg |
| Length | 544 mm |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.16
Important compatibility info
| Type | Equalising reservoir, hydraulic oil (power steering) |
| Function | Equalising reservoir, hydraulic oil (power steering) |
| Weight | 0.41 kg |
| Extra Description | febi Plus |
| Additional Information 2 | without cap |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.17
Important compatibility info
| Thickness/Strength 1 | 15.3 mm |
| Weight | 1.397 kg |
| Wear Warning Contact | with acoustic wear warning |
| Width | 54.3 mm. 50 mm |
| Function | Brake Pad Set, disc brake |
| Inspection Tag | ECE R90 Approved |
| Type | Brake Pad Set, disc brake |
| Length | 149.9 mm |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.18
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023