Important compatibility info
Weight | 0.270 kg |
Length | 2100 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 8 |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right |
Paired article numbers | 176563 |
Extra Description | febi Plus |
Function | Washer Fluid Jet, headlight cleaning |
Type | Washer Fluid Jet, headlight cleaning |
Weight | 0.149 kg |
Additional Information | with lift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 2050 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 10 |
Weight | 0.256 kg |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Function | Washer Fluid Jet, headlight cleaning |
Type | Washer Fluid Jet, headlight cleaning |
Weight | 0.149 kg |
Paired article numbers | 176567 |
Placement on Vehicle | Left |
Additional Information | with lift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.804 kg |
Material | Grey Cast Iron |
Number of Teeth | 27 |
Number of Wings | 6 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Rubber |
Type | Water Pump, engine cooling |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.081 kg |
Length | 905 mm |
Type | Sensor, crankshaft pulse |
Function | Sensor, crankshaft pulse |
Additional Information 2 | without seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Piston conrod diameter | 8 mm |
Housing length | 295.5 mm |
Mounting points diameter | 18 mm |
Stroke | 217 mm |
Eject Force | 460 N |
Housing Diameter | 18 mm |
Weight | 0.2 kg |
Length | 544 mm |
Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1215 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 6 |
Function | V-Ribbed Belt |
One-sided / Double-sided | Double-sided |
Weight | 0.174 kg |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 5 mm |
Function | Fuel Hose |
Suited for fuel type | Ethanol Blended Petrol (E10) |
Type | Fuel Hose |
Weight | 0.02 kg |
Length | 230 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.402 kg |
Placement on Vehicle | Rear Axle |
Wear Warning Contact | incl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Length | 122.8 mm |
Width | 53.5 mm |
Thickness/Strength 1 | 17.5 mm |
Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 120 mm |
Paired article numbers | 21037 |
Thread Type | with right-hand thread |
Placement on Vehicle | Front Axle, Rear Axle |
External Thread Size | M27 x 1,5, M30 x 1,5 RHT |
Weight | 1.750 kg |
Pipe Diameter | 40 mm |
Cone Size | 32 mm |
Extra Description | ProKit |
Type | Angled Ball Joint, steering drag link / Tie Rod End |
Function | Angled Ball Joint, steering drag link / Tie Rod End |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (27481)
- 1x Febi Nut (26529)
Important compatibility info
Type | Equalising reservoir, hydraulic oil (power steering) |
Function | Equalising reservoir, hydraulic oil (power steering) |
Weight | 0.41 kg |
Extra Description | febi Plus |
Additional Information 2 | without cap |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.095 kg |
Placement on Vehicle | Front |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing length | 279.5 mm |
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Weight | 0.20 kg |
Piston conrod diameter | 8 mm |
Housing Diameter | 18 mm |
Length | 494 mm |
Placement on Vehicle | both sides |
Mounting points diameter | 17.8 mm |
Stroke | 184 mm |
Eject Force | 410 N |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cable Length | 510 mm |
Type | Sensor, crankshaft pulse |
Function | Sensor, crankshaft pulse |
Weight | 0.064 kg |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Gasket Set, cylinder head cover |
Material | ACM (Polyacrylate) |
Paired article numbers | 34796 |
Placement on Vehicle | Right |
Weight | 0.185 kg |
Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness | 65 mm |
Inner diameter | 14.2 mm |
Placement on Vehicle | Rear, inner, Front Axle Left, Front Axle Right |
Material | Rubber/Metal |
Outer diameter | 78.1 mm |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Weight | 0.316 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Material | ACM (Polyacrylate) |
Paired article numbers | 34795 |
Function | Gasket Set, cylinder head cover |
Weight | 0.185 kg |
Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.163 kg |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Cooling Hose | from expansion tank to distributor |
Function | Radiator Hose |
Additional Information 2 | with quick couplers |
Type | Radiator Hose |
Hose Length | 560 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Air Dryer Cartridge, compressed-air system |
Inner diameter | 110 mm |
Colour | Silver |
Thickness | 178 mm |
Outer diameter | 137 mm |
Additional Information 2 | with seal ring, with integrated oil separator |
Thread Type | with right-hand thread |
Weight | 2.940 kg |
Internal Thread Size | G1 1/4" |
Type | Air Dryer Cartridge, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with crown nut |
Function | Ball Joint |
Extra Description | ProKit |
External Thread Size | M18 x 1,5 |
Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
Steering arm type | for control arm |
Weight | 0.83 kg |
Type | Ball Joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness/Strength 1 | 15.8 mm |
Placement on Vehicle | Front Axle |
Length | 141.7 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Width | 61.1 mm |
Weight | 1.84 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Wear Warning Contact | incl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Width | 48.9 mm |
Function | Brake Pad Set, disc brake |
Placement on Vehicle | Rear Axle |
Length | 136.8 mm |
Weight | 1.496 kg |
Thickness/Strength 1 | 18.2 mm |
Type | Brake Pad Set, disc brake |
Additional Information 2 | with anti-squeak plate, with brake caliper screws, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Right |
Paired article numbers | 104571 |
Number of Connectors / Ports | 2 |
Resistance | 1800 Ohm |
Cable Length | 1750 mm |
Function | Sensor, wheel speed |
Weight | 0.106 kg |
Type | Sensor, wheel speed |
Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.73 kg |
Placement on Vehicle | Rear Axle |
Length | 99.9 mm |
Width | 41 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 14.5 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Pipe Diameter | 9.9 mm |
Function | Fuel filter |
Height | 124 mm |
Weight | 0.28 kg |
Housing material | Metal |
Outer diameter | 98 mm |
Type | Fuel filter |
Filter type | In-Line Filter, with water drain screw |
Additional Information | with valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Aluminium |
Weight | 0.183 kg |
Type | Wheel Brake Cylinder |
Function | Wheel Brake Cylinder |
Piston Diameter | 19 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.668 kg |
Placement on Vehicle | Front Axle |
Length | 142 mm |
Width | 55.7 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 15.8 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.297 kg |
Placement on Vehicle | Front Axle Left, Rear, Front Axle Right |
Function | Mounting, control/trailing arm |
Inner diameter | 15 mm |
Outer diameter | 56 mm |
Length | 89.5 mm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.4 kg |
Placement on Vehicle | Left |
Material | Rubber/Metal |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
for OE number | 1307908080 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.960 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 43 mm |
Outer diameter | 76 mm |
Inner diameter | 43 mm |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Additional Information | with retaining rings, with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Filter type | Filter Insert |
Type | Oil Filter, retarder |
Function | Oil Filter, retarder |
Height | 109 mm |
Outer diameter | 85 mm |
Weight | 0.261 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.372 kg |
Type | Protection Lid, wheel hub |
Function | Protection Lid, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 110 mm |
Height | 42 mm |
Width | 53 mm |
Material | Plastic |
Colour | Black |
Number of Connectors / Ports | 2 |
Function | Switch, tailgate release |
Extra Description | febi Plus |
Weight | 0.052 kg |
Type | Switch, tailgate release |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.062 kg |
Length | 163 mm |
Height | 102 mm |
Width | 61 mm |
Material | Plastic |
Colour | Black |
Number of Connectors / Ports | 2 |
Function | Switch, tailgate release |
Extra Description | febi Plus |
Type | Switch, tailgate release |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.059 kg |
Length | 161 mm |
Height | 47 mm |
Number of Connectors / Ports | 2 |
Function | Switch, tailgate release |
Width | 60 mm |
Material | Plastic |
Colour | Black |
Extra Description | febi Plus |
Type | Switch, tailgate release |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,5 |
Placement on Vehicle | Front Axle Left |
Paired article numbers | 44342 |
Function | Tie Rod |
Weight | 1.01 kg |
Extra Description | ProKit |
Type | Tie Rod |
Additional Information 2 | with clamps, with steering bellow |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod (14170)
- 1x Febi Bellow Kit, steering (37764)
Important compatibility info
Function | Master Cylinder, clutch |
Type | Master Cylinder, clutch |
Weight | 0.203 kg |
Fill Medium | Brake Fluid |
Additional Information 2 | without sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.05 kg |
Length | 990 mm |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,5 |
Weight | 1.01 kg |
Placement on Vehicle | Front Axle Right |
Paired article numbers | 44341 |
Function | Tie Rod |
Extra Description | ProKit |
Type | Tie Rod |
Additional Information 2 | with clamps, with steering bellow |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod (14168)
- 1x Febi Bellow Kit, steering (37764)
Important compatibility info
Weight | 0.416 kg |
Placement on Vehicle | Front Axle |
Function | Dust Cover Kit, shock absorber |
Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 40.9 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Weight | 0.180 kg |
Thickness | 41 mm |
Material | Rubber/Metal |
Placement on Vehicle | Rear Axle Left, Upper, Rear, Rear Axle Right |
Inner diameter | 12.3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.21 kg |
Material | PU (Polyurethane) |
Function | Rubber Buffer, suspension |
Width | 70 mm |
Length | 68 mm |
Placement on Vehicle | Rear Axle |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Length | 809 mm |
Housing Diameter | 18 mm |
Eject Force | 280 N |
Stroke | 348 mm |
Mounting points diameter | 16 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, bonnet |
Housing length | 397.5 mm |
Weight | 0.424 kg |
Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 43 mm |
Spanner Size | 36, 14 |
Function | Inner Tie Rod |
External Thread Size | M14 x 1,5 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 324 mm |
Additional Information | with counter nut |
Weight | 0.780 kg |
Type | Inner Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right Front |
Material | Plastic |
Paired article numbers | 193068 |
Colour | Black |
Weight | 0.19 kg |
Type | Door Check |
Function | Door Check |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.198 kg |
Placement on Vehicle | both sides |
Length | 366 mm |
Housing Diameter | 18 mm |
Eject Force | 280 N |
Stroke | 117 mm |
Mounting points diameter | 16.5 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Housing length | 226 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.220 kg |
Placement on Vehicle | Rear |
Length | 1677 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 55.1 mm |
Number of Connectors / Ports | 2 |
Function | Sensor, camshaft position |
Weight | 0.03 kg |
Type | Sensor, camshaft position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.342 kg |
Placement on Vehicle | Rear Axle |
Type | Dust Cover Kit, shock absorber |
Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (186196)
- 2x Febi Protective Cap/Bellow, shock absorber (109362)






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023