Proud to be a UK-based company
Contact us
Important compatibility info
| Function | EGR Valve |
| Number of Connectors / Ports | 3 |
| Operating Mode | Electric |
| Type | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.38
Important compatibility info
| Housing Type | with housing |
| Number of Connectors / Ports | 4 |
| Type | Mass Air Flow Sensor |
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£157.43
Important compatibility info
| Operating Mode | Electric |
| Number of Connectors / Ports | 2 |
| Function | EGR Valve |
| Type | EGR Valve |
| Additional Information | with EGR cooler, with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.33
Important compatibility info
| Function | Sensor, camshaft position |
| Number of Connectors / Ports | 2 |
| Outer diameter | 18 mm |
| Length | 52.5 mm |
| Type | Sensor, camshaft position |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.70
Important compatibility info
| Height | 80 mm |
| Outer diameter | 59 mm |
| Function | Fuel filter |
| Gasket outer diameter | 69 mm |
| Gasket inner diameter | 63 mm |
| Type | Fuel filter |
| Additional Information 2 | with seal ring |
| Filter type | Pre-filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.07
Important compatibility info
| Height | 118 mm |
| Outer diameter | 81 mm |
| Function | Hydraulic Filter, steering |
| Type | Hydraulic Filter, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.63
Important compatibility info
| Number of Wings | 5 |
| Housing material | Cast Aluminium |
| Water pump impeller material | Metal |
| Seal Material | Metal |
| Function | Water Pump, engine cooling |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£126.66
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 202 mm |
| Diameter | 8 mm |
| Material | Steel |
| Thickness | 61.5 mm |
| Spanner Size | 15 |
| Rod/Strut | Coupling Rod |
| External Thread Size | M10 x 1,25 |
| Thread Length | 24 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.29
Important compatibility info
| Function | Wheel Bolt |
| Screw length below head | 40 mm. 77 mm |
| Spanner Size | 17 |
| Surface | Zink flake coated |
| Thread Length | 20 mm |
| Bolt Head/Nut Design | External Hexagon |
| Quality/ Grade | 10.9 |
| Wheel Fastening | Ball seat A/G |
| Placement on Vehicle | Rear Axle, Front Axle |
| Length | 95 mm |
| Material | Steel |
| Outer diameter | 22.5 mm |
| External Thread Size | M12 x 1,5 |
| Type | Wheel Bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Spanner Size | 17 |
| Rod/Strut | Coupling Rod |
| Material | Steel |
| Thickness | 70 mm |
| Thread Length | 33 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,25 |
| Additional Information | with nuts |
| Length | 282 mm |
| Diameter | 9 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.77
Important compatibility info
| Rod/Strut | Coupling Rod |
| Thread Length | 23 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Spanner Size | 19 |
| Length | 270 mm |
| Diameter | 10 mm |
| Material | Steel |
| Thickness | 49 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Extra Description | ProKit |
| Additional Information | with nuts |
| External Thread Size | M12 x 1,25 |
| Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.99
Important compatibility info
| Function | Shaft Seal, crankshaft |
| Placement on Vehicle | frontal sided |
| Height | 8 mm |
| Outer diameter | 75 mm |
| Inner diameter | 60 mm |
| Colour | Black |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.07
Important compatibility info
| Length from grip collar to min. marking | 558 mm |
| Length from grip collar to max. marking | 542 mm |
| Outer Length | 630 mm |
| Function | Oil Dipstick |
| Extra Description | febi Plus |
| Type | Oil Dipstick |
| Colour | Orange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£9.11
Important compatibility info
| Length | 78 mm |
| Width | 78 mm |
| Thickness | 0.5 mm |
| Inner diameter | 61 mm |
| Function | Gasket, throttle body |
| Type | Gasket, throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.03
Important compatibility info
| Height | 203 mm |
| Outer diameter | 109 mm |
| Function | Fuel filter |
| Gasket outer diameter | 127.4 mm |
| Gasket inner diameter | 116.5 mm |
| Type | Fuel filter |
| Additional Information 2 | with seal ring |
| Filter type | Filter Insert |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.87
Important compatibility info
| Number of Teeth | 21 |
| Function | Sprocket, crankshaft |
| Type | Sprocket, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£42.32
Important compatibility info
| Function | Oil Dipstick |
| Length from grip collar to max. marking | 540 mm |
| Length from grip collar to min. marking | 575 mm |
| Colour | Green |
| Extra Description | febi Plus |
| Type | Oil Dipstick |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.12
Important compatibility info
| Inner diameter | 8.3 mm |
| Function | Deflection Pulley/Guide Pulley, timing belt |
| Outer diameter | 40 mm |
| Material | Metal |
| Width | 29 mm |
| Type | Deflection Pulley/Guide Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.32
Important compatibility info
| Extra Description | febi Plus |
| Function | Valve, crankcase ventilation |
| Material | NBR (nitrile butadiene rubber), Plastic |
| Type | Valve, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.07
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 196.5 mm |
| Width | 198.4 mm |
| Thickness | 69.4 mm |
| Function | Repair Kit, suspension strut support mount |
| Material | Rubber/Metal |
| Extra Description | ProKit |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with fastening material, with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.85
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023