Proud to be a UK-based company
Contact us
Important compatibility info
| Length | 120 mm |
| Paired article numbers | 21037 |
| Thread Type | with right-hand thread |
| Placement on Vehicle | Front Axle, Rear Axle |
| External Thread Size | M27 x 1,5, M30 x 1,5 RHT |
| Pipe Diameter | 40 mm |
| Cone Size | 32 mm |
| Extra Description | ProKit |
| Type | Angled Ball Joint, steering push rod / Tie Rod End |
| Function | Angled Ball Joint, steering push rod / Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (27481)
- 1x Febi Nut (26529)
£23.24
Important compatibility info
| Extra Description | febi Plus |
| Material | Plastic |
| Outer diameter | 112 mm |
| Number of Ribs | 7 |
| Inner diameter 1 | 6.5 mm |
| Inner diameter 2 | 38 mm |
| Function | Belt Pulley, water pump |
| Hole Spacing | 54 mm |
| Type | Belt Pulley, water pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.24
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 140.2 mm |
| Width | 59.5 mm |
| Inspection Tag | ECE R90 Approved |
| Type | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 15.5 mm |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.24
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.24
Important compatibility info
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Housing length | 295.5 mm |
| Mounting points diameter | 18 mm |
| Stroke | 217 mm |
| Eject Force | 460 N |
| Housing Diameter | 18 mm |
| Length | 544 mm |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.24
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 66 |
| Type | Chain, oil pump drive |
| Function | Chain, oil pump drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.24
Important compatibility info
| Placement on Vehicle | Lower, Rear |
| Paired article numbers | 193833 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Holder, engine mounting system |
| Function | Holder, engine mounting system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.24
Important compatibility info
| Placement on Vehicle | Rear, Upper |
| Paired article numbers | 193832 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Holder, engine mounting system |
| Function | Holder, engine mounting system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.24
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 455 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.24
Important compatibility info
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.24
Important compatibility info
| Placement on Vehicle | Front |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.25
Important compatibility info
| Additional Information 2 | with quick couplers |
| Cooling Hose | from thermostat to radiator |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Plastic |
| Function | Radiator Hose |
| Type | Radiator Hose |
| Hose Length | 205 mm |
| for OE number | 17 12 7 536 231 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.25
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Cooling Hose | from expansion tank to distributor |
| Function | Radiator Hose |
| Additional Information 2 | with quick couplers |
| Type | Radiator Hose |
| Hose Length | 560 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.25
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 62 mm |
| Thickness | 73 mm |
| Inner diameter | 12 mm |
| Type | Bushing, axle beam |
| Function | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.25
Important compatibility info
| Placement on Vehicle | Lower Right |
| Cooling Hose | from thermostat to radiator |
| Function | Radiator Hose |
| Additional Information 2 | with quick couplers |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.25
Important compatibility info
| Function | V-Ribbed Belt |
| Number of Ribs | 8 |
| Length | 2604 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.25
Important compatibility info
| Additional Information | with rubber mounts |
| Placement on Vehicle | Front Axle Right, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 36923 |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.26
Important compatibility info
| Placement on Vehicle | Left |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 1307908080 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.27
Important compatibility info
| Function | Air Dryer Cartridge, compressed-air system |
| Inner diameter | 110 mm |
| Colour | Silver |
| Thickness | 178 mm |
| Outer diameter | 137 mm |
| Additional Information 2 | with seal ring, with integrated oil separator |
| Thread Type | with right-hand thread |
| Internal Thread Size | G1 1/4" |
| Type | Air Dryer Cartridge, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.27
Important compatibility info
| External Thread Size | M24 x 1,5, M30 x 1,5 RHT |
| Placement on Vehicle | Front Axle |
| Length | 150 mm |
| Width | 40 mm |
| Thickness | 121 mm |
| Cone Size | 30 mm |
| Function | Tie Rod End |
| Thread Type | with right-hand thread |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.27
Important compatibility info
| Outer diameter | 98 mm |
| Filter type | In-Line Filter |
| Pipe Diameter | 10 mm |
| Housing material | Metal |
| Type | Fuel filter |
| Function | Fuel filter |
| Height | 177 mm |
| Seal Material | FPM (fluoride rubber) |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.27
Important compatibility info
| Function | Fuel filter |
| Filter type | Filter Insert |
| Outer diameter | 90 mm |
| Height | 120 mm |
| Seal Diameter | 76.2 mm. 9.5 mm |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.27
Important compatibility info
| Function | Fuel filter |
| Type | Fuel filter |
| Filter type | In-Line Filter |
| Outer diameter | 98 mm |
| Height | 177 mm |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.27
Important compatibility info
| Outer diameter | 30 mm |
| Opening Temperature | 88 °C |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.27
Important compatibility info
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| External Thread Size | M18 x 1,5 |
| ABS Ring Diameter | 72 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
| External Teeth, Wheel Side | 23 |
| Internal Teeth, wheel side | 20 |
| Number of Teeth, ABS ring | 43 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.27
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.27
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 367 mm |
| Outer diameter | 81 mm |
| Number of Coils | 5.3 |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Wire Diameter | 12.50 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.27
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 240 mm |
| Width | 58 mm |
| Material | PU (Polyurethane) |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (172107)
- 2x Febi Rubber Buffer, suspension (170451)
£23.28
Important compatibility info
| Type | Pressure Controller, compressed-air system |
| Shifting Points | 12 bar |
| Function | Pressure Controller, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.29
Important compatibility info
| Function | Cable Pull, parking brake |
| Paired article numbers | 106230 |
| Placement on Vehicle | Left Rear |
| Length | 2004 mm |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.29
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023