Important compatibility info
Weight | 2.1 kg |
Width | 69.5 mm |
Placement on Vehicle | Front Axle |
Length | 119 mm |
Inspection Tag | ECE R90 Approved |
Wear Warning Contact | incl. wear warning contact |
Cable Length | 230 mm |
Thickness/Strength 1 | 19.4 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.859 kg |
Placement on Vehicle | Front Axle |
Length | 109.8 mm |
Width | 59.6 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 19.2 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Replaces | 16059 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Lower Right |
Cooling Hose | from thermostat to radiator |
Function | Radiator Hose |
Weight | 0.330 kg |
Additional Information 2 | with quick couplers |
Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Wheel Side, Front Axle Right |
Length | 127 mm |
Material | Thermoplastic polyester elastomer |
Inner diameter 1 | 38 mm |
Inner diameter 2 | 92 mm |
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Joint Type | CV Joint |
Weight | 0.197 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (177576)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
External Thread Size | M12 x 1,25 |
Material | Steel |
Steering arm type | Control Arm |
Additional Information 2 | with ball joint |
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Centre |
Weight | 0.712 kg |
Cone Size | 15.5 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts, with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.262 kg |
Type | Mounting Kit, charger |
Function | Mounting Kit, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.206 kg |
Placement on Vehicle | both sides |
Mounting points diameter | 17.8 mm |
Piston conrod diameter | 8 mm |
Housing length | 238.5 mm |
Stroke | 160 mm |
Length | 436 mm |
Housing Diameter | 18 mm |
Eject Force | 370 N |
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.325 kg |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Additional Information | with nuts, with rubber mounts |
Paired article numbers | 40439 |
Material | Sheet Steel |
Placement on Vehicle | Rear Axle Right, Lower, Front |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bolts/screws |
Bolt / Nut Version | with plain washer, with lockwasher |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (32957)
- 1x Febi Screw (40423)
- 1x Febi Nut (14392)
- 1x Febi Washer (40430)
- 1x Febi Washer (40434)
- 1x Febi Nut (37956)
Important compatibility info
Operating Mode | pneumatic |
Function | Fuel Pressure Regulator |
Pressure | 4 bar |
Weight | 0.05 kg |
Type | Fuel Pressure Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Lower, Front |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 40438 |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with nuts, with rubber mounts |
Weight | 1.325 kg |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bolts/screws |
Bolt / Nut Version | with plain washer, with lockwasher |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (32956)
- 1x Febi Nut (14392)
- 1x Febi Washer (40430)
- 1x Febi Washer (40434)
- 1x Febi Nut (37956)
- 1x Febi Screw (40423)
Important compatibility info
Weight | 0.199 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Number of Connectors / Ports | 2 |
Cable Length | 3030 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information | with bush |
Resistance | 1250 Ohm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Trailing Arm, Control Arm |
Material | Sheet Steel |
Placement on Vehicle | Rear Axle Right, Centre |
Weight | 1.5 kg |
Paired article numbers | 103725 |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front |
Length | 1658 mm |
Weight | 0.620 kg |
Type | Cable Pull, parking brake |
Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 123 mm |
Weight | 1.360 kg |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Thickness/Strength 1 | 14.5 mm |
Width | 58 mm |
Inspection Tag | ECE R90 Approved |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.63 kg |
Placement on Vehicle | Front Axle |
Length | 132.8 mm |
Width | 58.2 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 16.8 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Manufacturer | HYUNDAI KIA |
Model | i20 RIO STONIC |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Material | Sheet Steel |
Placement on Vehicle | Rear Axle Left, Centre |
Paired article numbers | 103726 |
Weight | 1.5 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.89 kg |
Placement on Vehicle | Front Axle |
Length | 149 mm |
Width | 58 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Additional Information 2 | with fastening material, with ball bearing |
Weight | 0.702 kg |
Function | Repair Kit, suspension strut support mount |
Extra Description | ProKit |
Type | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (37030)
- 1x Febi Rolling Bearing, suspension strut support mount (10091)
- 1x Febi Spring Seat (37165)
- 1x Febi Nut (37805)
- 1x Febi Nut (37801)
Important compatibility info
Type | Bush, driver cab suspension |
Material | Rubber/Metal |
Weight | 0.519 kg |
Function | Bush, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Sheet Steel |
Steering arm type | Control Arm |
Weight | 2.55 kg |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.55 kg |
Number of mounting bores | 4 |
Mounting points diameter | 8.2 mm. 10.7 mm |
Type | Selector-/Shift Rod |
Function | Selector-/Shift Rod |
for OE number | 1 379 621 |
Placement on Vehicle | Transverse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 32138290 |
Placement on Vehicle | Left |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, automatic transmission |
Function | Mounting, automatic transmission |
Weight | 0.480 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | NBR (nitrile butadiene rubber) |
Function | Intake Hose, air filter |
Weight | 0.216 kg |
Extra Description | febi Plus |
Type | Intake Hose, air filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.93 kg |
Placement on Vehicle | Front Axle Left |
Paired article numbers | 39293 |
Type | Tie Rod |
Function | Tie Rod |
Extra Description | ProKit |
Additional Information 2 | with clamps, with steering bellow |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (17766)
- 1x Febi Tie Rod End (09317)
- 1x Febi Bellow, steering (18043)
- 1x Febi Clamping Clip (38754)
- 1x Febi Clamping Clip (38761)
Important compatibility info
Material | Plastic |
Weight | 0.025 kg |
Number of Connectors / Ports | 3 |
Function | Sensor, exhaust pressure |
Type | Sensor, exhaust pressure |
for OE number | 07Z 906 051 A |
Sensor Type | Differential Pressure Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.557 kg |
Placement on Vehicle | Lower Front Axle |
Cone Size | 22 mm |
Function | Ball Joint |
Extra Description | ProKit |
Type | Ball Joint |
Additional Information 2 | with nut, with screw |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (22468)
- 1x Febi Clamping Bolt, ball joint (40524)
- 1x Febi Nut (45945)
Important compatibility info
Width | 20 mm |
Outer diameter | 47 mm |
Inner diameter | 12 mm. 18 mm |
Paired article numbers | 38205 |
Weight | 0.78 kg |
Placement on Vehicle | Front Axle Left |
Additional Information 2 | with ball bearing, with fastening material |
Function | Repair Kit, suspension strut support mount |
Extra Description | ProKit |
Type | Repair Kit, suspension strut support mount |
Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Repair Kit, suspension strut support mount (36821)
- 1x Febi Nut (38175)
- 3x Febi Nut (38176)
Important compatibility info
Length | 65 mm |
Number of Connectors / Ports | 3 |
Function | Sensor, crankshaft pulse |
Weight | 0.026 kg |
Additional Information 2 | with seal ring |
Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Sensor, crankshaft pulse (29482)
- 1x Febi Seal Ring (26855)
Important compatibility info
Weight | 0.78 kg |
Width | 20 mm |
Outer diameter | 47 mm |
Inner diameter | 12 mm. 18 mm |
Spanner Size | 18 |
Paired article numbers | 38206 |
Placement on Vehicle | Front Axle Right |
Additional Information 2 | with ball bearing, with fastening material |
Function | Repair Kit, suspension strut support mount |
Extra Description | ProKit |
Type | Repair Kit, suspension strut support mount |
Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Repair Kit, suspension strut support mount (36820)
- 1x Febi Nut (38175)
- 3x Febi Nut (38176)
Important compatibility info
Function | Pressure Converter, exhaust control |
Number of Connectors / Ports | 2 |
Extra Description | febi Plus |
Type | Pressure Converter, exhaust control |
Weight | 0.067 kg |
for OE number | 1618.JC |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Air Filter |
Type | Air Filter |
Weight | 0.39 kg |
Filter type | Filter Insert |
Width | 134 mm |
Additional Information 2 | with pre-filter |
Height | 39 mm |
Length | 675 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Eject Force | 360 N |
Stroke | 165 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Weight | 0.225 kg |
Placement on Vehicle | both sides |
Length | 465 mm |
Housing Diameter | 18 mm |
Housing length | 257.5 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 273 mm |
Outer diameter | 56 mm |
Filter type | In-Line Filter |
Pipe Diameter | 8 mm |
Function | Fuel filter |
Type | Fuel filter |
Weight | 0.290 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.350 kg |
Placement on Vehicle | Rear Axle |
Length | 109.5 mm |
Width | 49.8 mm |
Wear Warning Contact | incl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Cable Length | 253 mm |
Thickness/Strength 1 | 19.7 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | without lid |
Material | PP (Polypropylene) |
Type | Expansion Tank, coolant |
Function | Expansion Tank, coolant |
Weight | 0.384 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Intake Side |
Height | 21.7 mm |
Material | FPM (fluoride rubber) |
Inner diameter | 5 mm |
Colour | Brown |
Outer diameter 1 | 10 mm |
Outer diameter 2 | 22.7 mm |
Function | Seal Set, valve stem |
Weight | 0.070 kg |
Type | Seal Set, valve stem |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.070 kg |
Material | FPM (fluoride rubber) |
Height | 21.2 mm |
Inner diameter | 6 mm |
Colour | Green |
Outer diameter 1 | 10 mm |
Function | Seal Set, valve stem |
Outer diameter 2 | 22.7 mm |
Type | Seal Set, valve stem |
Placement on Vehicle | Exhaust Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 302 mm |
Weight | 1.39 kg |
Number of Coils | 6.8 |
Function | Suspension Spring |
Outer diameter | 110 mm |
Placement on Vehicle | Rear Axle |
Type | Suspension Spring |
Wire Diameter | 10.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.662 kg |
Placement on Vehicle | Left Front |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
for OE number | 06 84 671 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 183 mm |
Gasket outer diameter | 106.7 mm |
Weight | 1.340 kg |
Type | Oil Filter |
Function | Oil Filter |
Gasket inner diameter | 97 mm |
Outer diameter | 127 mm |
Filter type | Spin-on Filter |
Internal Thread Size | 1 1/4" - 11 UNF |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 116.3 mm |
Width | 59.8 mm. 49.9 mm |
Thickness/Strength 1 | 18.5 mm |
Inspection Tag | ECE R90 Approved |
Function | Brake Pad Set, disc brake |
Weight | 1.2 kg |
Type | Brake Pad Set, disc brake |
Wear Warning Contact | prepared for wear warning indicator |
Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 91.9 mm |
Width | 38.8 mm. 42.8 mm |
Additional Information 2 | with fastening material |
Inspection Tag | ECE R90 Approved |
Weight | 0.868 kg |
Thickness/Strength 1 | 17.4 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,25 |
Internal Thread Size | M14 x 1,5 |
Thickness | 79 mm |
Spanner Size | 19 |
Function | Tie Rod End |
Paired article numbers | 42461 |
Placement on Vehicle | Front Axle Left |
Length | 183 mm |
Weight | 0.58 kg |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.700 kg |
Placement on Vehicle | Left |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Function | Mounting, engine |
for OE number | MR961540 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left |
Paired article numbers | 174633 |
Type | Splash Guard, brake disc |
Function | Splash Guard, brake disc |
Extra Description | febi Plus |
Weight | 0.539 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with fastening material |
Placement on Vehicle | Front Axle |
Length | 130 mm |
Width | 58.2 mm |
Inspection Tag | ECE R90 Approved |
Type | Brake Pad Set, disc brake |
Thickness/Strength 1 | 17.7 mm |
Function | Brake Pad Set, disc brake |
Weight | 1.793 kg |
Additional Information | with retaining spring holder |
Wear Warning Contact | with acoustic wear warning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.736 kg |
Placement on Vehicle | Front Axle |
Length | 132.5 mm |
Width | 60 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 16.7 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information 2 | with anti-squeak plate |
Additional Information | with retaining spring holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.280 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, manual transmission |
Function | Mounting, manual transmission |
Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 34 mm |
Outer diameter | 74 mm |
Inner diameter | 39 mm |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information 2 | with retaining ring |
Weight | 0.740 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (173012)
- 1x Febi Circlip (173722)
Important compatibility info
Weight | 0.408 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Wheel Bearing Kit |
Bearing Type | Tapered Roller Bearing |
Width 2 | 17.5 mm |
Outer diameter 2 | 50 mm |
Width 1 | 18 mm |
Outer diameter 1 | 62 mm |
Inner diameter 2 | 22 mm |
Inner diameter 1 | 35 mm |
Type | Wheel Bearing Kit |
Additional Information 2 | with shaft seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (27163)
- 1x Febi Wheel Bearing (27164)
- 1x Febi Shaft Seal, wheel hub (27165)






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023