Proud to be a UK-based company
Contact us
Important compatibility info
| Material | Thermoplastic polyester elastomer |
| Inner diameter 1 | 31 mm |
| Length | 115 mm |
| Joint Type | Tripod Joint |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Weight | 0.215 kg |
| Inner diameter 2 | 91 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (184375)
- 1x Febi Molybdenum Grease (02582)
£24.55
Important compatibility info
| External Teeth, Wheel Side | 33 |
| Internal Teeth, wheel side | 25 |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Number of Teeth, ABS ring | 29 |
| ABS Ring Diameter | 78 mm |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| Thread Size | M20x1,5 |
| Weight | 2.446 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.55
Important compatibility info
| Number of Connectors / Ports | 2 |
| Weight | 0.09 kg |
| Type | Switch, reverse light |
| Function | Switch, reverse light |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.55
Important compatibility info
| Material | Plastic |
| Height | 51.3 mm |
| Weight | 0.265 kg |
| Inner diameter 2 | 60 mm |
| Outer diameter 1 | 126 mm |
| Inner diameter 1 | 80 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Rolling Bearing, suspension strut support mount |
| Outer diameter 2 | 89 mm |
| Type | Rolling Bearing, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.55
Important compatibility info
| Weight | 0.111 kg |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 172048 |
| Number of Connectors / Ports | 2 |
| Resistance | 1800 Ohm |
| Cable Length | 1320 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.55
Important compatibility info
| Length | 166 mm |
| Width | 159 mm |
| Outer diameter | 57 mm. 122 mm |
| Inner diameter | 12 mm |
| Weight | 0.850 kg |
| Material | Rubber/Metal |
| Placement on Vehicle | Rear Axle |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Height | 70 mm |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.55
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Weight | 0.478 kg |
| Placement on Vehicle | Front, Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.56
Important compatibility info
| Weight | 0.3 kg |
| Length | 1900 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 12 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.56
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Outer diameter | 43 mm |
| Additional Information 2 | with crown nut |
| Steering arm type | for control arm |
| Weight | 0.360 kg |
| Type | Ball Joint |
| Function | Ball Joint |
| Cone Size 2 | 20 mm |
| Cone Size 1 | 17 mm |
| External Thread Size | M14 x 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.56
Important compatibility info
| Weight | 0.176 kg |
| Placement on Vehicle | both sides |
| Length | 345 mm |
| Housing Diameter | 18 mm |
| Eject Force | 350 N |
| Stroke | 122 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 195.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.56
Important compatibility info
| Cable Length | 1060 mm |
| Type | Sensor, wheel speed |
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 107211 |
| Number of Connectors / Ports | 2 |
| Weight | 0.094 kg |
| Function | Sensor, wheel speed |
| Additional Information 2 | with retaining strap |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.56
Important compatibility info
| Weight | 0.072 kg |
| Type | Hose, crankcase ventilation |
| Function | Hose, crankcase ventilation |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.57
Important compatibility info
| Thread Length | 113 mm |
| Thread Type | with left-hand thread |
| Placement on Vehicle | Front Axle Left |
| Length | 148 mm |
| Paired article numbers | 32536 |
| Weight | 1.5 kg |
| External Thread Size | M20 x 1,5 |
| Internal Thread Size | M28 x 1,5 LHT |
| Function | Tie Rod End |
| Cone Size | 26 mm |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.57
Important compatibility info
| Weight | 1.5 kg |
| Placement on Vehicle | Front Axle Right |
| Thread Length | 113 mm |
| Function | Tie Rod End |
| Cone Size | 26 mm |
| Thread Type | with right-hand thread |
| Paired article numbers | 32498 |
| Length | 148 mm |
| Internal Thread Size | M28 x 1,5 RHT |
| Extra Description | ProKit |
| External Thread Size | M20 x 1,5 |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.57
Important compatibility info
| Weight | 0.348 kg |
| Type | Pilot Bearing, clutch |
| Function | Pilot Bearing, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.57
Important compatibility info
| Material | Rubber |
| Length | 452 mm |
| Weight | 0.145 kg |
| Type | Hydraulic Hose, steering |
| Function | Hydraulic Hose, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.58
Important compatibility info
| Length | 257 mm |
| Height | 84 mm |
| Width | 232 mm |
| Additional Information 2 | with pre-filter |
| Filter type | Filter Insert |
| Weight | 0.44 kg |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.58
Important compatibility info
| Replaces | 15733 |
| Material | Cast Aluminium |
| Number of Wings | 9 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Paper |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| Weight | 0.765 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| Extra Description | febi Plus |
| Placement on Vehicle | both sides |
| Weight | 0.13 kg |
| for OE number | 61 67 7 179 311 |
| Function | Washer Fluid Jet, headlight cleaning |
| Type | Washer Fluid Jet, headlight cleaning |
| Additional Information | with lift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| Weight | 0.52 kg |
| Placement on Vehicle | both sides |
| Length | 656 mm |
| Housing Diameter | 22 mm |
| Eject Force | 880 N |
| Stroke | 165 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 10 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 447.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| Length | 1051 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Weight | 0.101 kg |
| Number of Ribs | 7 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
| Additional Information 2 | Requires special tools for mounting |
| Chemical Properties | Elastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| Weight | 0.423 kg |
| Function | Hydraulic Filter Kit, automatic transmission |
| Length | 247.5 mm |
| Height | 34 mm |
| Width | 200 mm |
| Additional Information 2 | with oil sump gasket |
| Type | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Hydraulic Filter, automatic transmission (48369)
- 1x Febi Gasket, automatic transmission oil sump (43663)
£24.59
Important compatibility info
| Weight | 1.6 kg |
| Function | Suspension Spring |
| Placement on Vehicle | Rear Axle |
| Length | 328 mm |
| Outer diameter | 109 mm |
| Number of Coils | 7.5 |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| Weight | 0.126 kg |
| Length | 322 mm |
| Width | 175 mm |
| Filter type | Activated Carbon Filter |
| Function | Filter Set, cabin air |
| Height | 30 mm |
| Type | Filter Set, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| Extra Description | febi Plus |
| Function | Splash Guard, brake disc |
| Type | Splash Guard, brake disc |
| Weight | 0.258 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| Weight | 0.645 kg |
| Type | Belt Pulley, water pump |
| Function | Belt Pulley, water pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| Additional Information 2 | with oil sump gasket |
| Weight | 0.249 kg |
| Filter type | Screen Filter |
| Height | 35 mm |
| Width | 171 mm |
| Function | Hydraulic Filter Kit, automatic transmission |
| Length | 209 mm |
| Type | Hydraulic Filter Kit, automatic transmission |
| Seal Material | NBR (nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| Material | PTFE (polytetrafluoroethylene) |
| Weight | 0.148 kg |
| Placement on Vehicle | transmission sided |
| Inner diameter | 80 mm |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
| Additional Information 2 | with flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| Piston Rod Thread | M16 x 1,5 |
| Function | Diaphragm Brake Cylinder |
| Distance of fastening bolts | 120 mm |
| Piston Rod Length | 190 mm |
| Brake Type | Drum Brake |
| Stroke | 75 mm |
| Parameter | Typ 20 |
| Additional Information | with fastening/mounting material |
| Weight | 3.892 kg |
| Internal Thread Size | M16 x 1,5 |
| Type | Diaphragm Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| Function | Dust Cover Kit, shock absorber |
| Weight | 0.318 kg |
| Placement on Vehicle | Rear Axle |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Dust Cover Kit, shock absorber (109587)
£24.59
Important compatibility info
| Length | 1190 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Tensile Cord Material | Aramid |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
| Alternator type | for starter generator |
| Weight | 0.113 kg |
| Number of Ribs | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| Placement on Vehicle | Rear |
| Weight | 0.593 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Internal Thread Size | M10 x 1,25 |
| Type | Mounting, engine |
| for OE number | 50810-SAA-982 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| Type | Intake Valve |
| Weight | 0.213 kg |
| Notches / Holes Number | 1 |
| Valve stem diameter | 9.970 mm |
| Valve head diameter | 47 mm |
| Function | Intake Valve |
| Length | 199.4 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| Function | Suspension Spring |
| Type | Suspension Spring |
| Outer diameter | 140 mm |
| Weight | 1.85 kg |
| Length | 316 mm |
| Placement on Vehicle | Front Axle |
| Wire Diameter | 12.3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| Weight | 0.713 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Ball Joint |
| External Thread Size | M16 x 1,5, M42 x 1,5 |
| Cone Size | 19.2 mm |
| Type | Ball Joint |
| Additional Information 2 | with retaining ring |
| Steering arm type | for control arm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| Thread Length | 36.7 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Spanner Size | 19 |
| Paired article numbers | 48141 |
| Rod/Strut | Coupling Rod |
| Placement on Vehicle | Front Axle Left |
| Length | 99 mm |
| Material | Steel |
| Outer diameter | 10 mm |
| Weight | 0.38 kg |
| External Thread Size | M12 x 1,25 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 920 mm |
| Function | Sensor, wheel speed |
| Weight | 0.053 kg |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Front Axle |
| Weight | 0.382 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (180712)
- 2x Febi Protective Cap/Bellow, shock absorber (180629)
£24.59
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Weight | 0.070 kg |
| Cable Length | 1475 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| Weight | 0.031 kg |
| Length | 21 mm |
| Outer diameter | 21 mm |
| Function | Tappet, high pressure pump |
| Type | Tappet, high pressure pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
| Weight | 0.172 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| Additional Information 2 | with ball bearing, with fastening material |
| Placement on Vehicle | Front Axle |
| Function | Repair Kit, suspension strut support mount |
| Weight | 0.692 kg |
| Extra Description | ProKit |
| Type | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (36860)
- 1x Febi Rolling Bearing, suspension strut support mount (10091)
- 1x Febi Spring Seat (37165)
- 1x Febi Nut (37805)
- 1x Febi Nut (37801)
£24.59
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Weight | 1.4 kg |
| Length | 1200 mm |
| Outer diameter | 8.59 mm |
| Inner diameter | 4 mm |
| Pressure | 400 bar |
| Function | Hose Line, driver cab tilting device |
| Type | Hose Line, driver cab tilting device |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| Additional Information 2 | without lid |
| Material | PP (Polypropylene) |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
| Weight | 0.384 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| Weight | 0.157 kg |
| Number of Connectors / Ports | 2 |
| Cable Length | 1900 mm |
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| External Teeth, Wheel Side | 26 |
| Thread Size | M8x1,25 |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
| Weight | 2.012 kg |
| Internal Teeth, wheel side | 30 |
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| Paired article numbers | 106333 |
| Length | 1145 mm |
| Weight | 0.144 kg |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Rear Axle Left |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| Length | 2540 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Type | V-Ribbed Belt |
| Function | V-Ribbed Belt |
| Weight | 0.27 kg |
| DIN / ISO | 7867 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| Weight | 0.210 kg |
| Length | 1705 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 10 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
Important compatibility info
| Weight | 1.375 kg |
| Function | Oil sump |
| Type | Oil sump |
| Additional Information | without oil drain plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.59
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023