Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Rubber/Metal |
| Additional Information 2 | without ball bearing |
| Inner diameter | 10.2 mm |
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
| Shore-A hardness value, base body | 54 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Chain Links | 56 |
| Timing Chain Size | G44HCF |
| Function | Chain Kit, oil pump drive |
| Additional Information 2 | Requires special tools for mounting |
| Number of Teeth | 22 |
| Chain Type | Simplex, Closed chain |
| Extra Description | Basic Short Kit |
| Type | Chain Kit, oil pump drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (100678)
- 1x Febi Sprocket, crankshaft (100679)
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Coolant Flange |
| Additional Information | with temperature sensor, with gasket/seal |
| Type | Coolant Flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear |
| Length | 270 mm |
| Type | Spring, driver cab suspension |
| Function | Spring, driver cab suspension |
| Outer diameter | 73 mm. 65.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bore Diameter | 19 mm |
| Fill Medium | Brake Fluid |
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 220 mm |
| Width | 85 mm |
| Material | PU (Polyurethane), Plastic |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (109046)
- 2x Febi Rubber Buffer, suspension (36978)
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Additional Information | with fastening/mounting material |
| Function | Tie Rod |
| Steering | with tie rod end |
| Type | Tie Rod |
| External Thread Size | M14 x 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (109568)
- 1x Febi Inner Tie Rod (103145)
Important compatibility info
| Function | Glow Plug |
| Type | Glow Plug |
| Glow Plug Type | after-glow capable |
| Fitting Depth | 32.4 mm |
| External Thread Size | M10 x 1 |
| Voltage | 10.5 V |
| Spanner Size | 10 |
| Length | 106.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness | 30 mm |
| Function | Rolling Bearing, suspension strut support mount |
| Outer diameter 2 | 90 mm |
| Outer diameter 1 | 126 mm |
| Material | Plastic |
| Type | Rolling Bearing, suspension strut support mount |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness/Strength 1 | 17.5 mm |
| Function | Brake Pad Set, disc brake |
| Placement on Vehicle | Front Axle |
| Length | 129 mm |
| Width | 75.4 mm. 70.4 mm |
| Inspection Tag | ECE R90 Approved |
| Wear Warning Contact | prepared for wear warning indicator |
| Additional Information 2 | with fastening material |
| Type | Brake Pad Set, disc brake |
| Manufacturer | BMW MINI TOYOTA |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 72 mm |
| Function | Fuel filter set |
| Type | Fuel filter set |
| Filter type | Filter Insert |
| Outer diameter | 76 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 56 |
| Function | Chain, oil pump drive |
| Type | Chain, oil pump drive |
| Additional Information 2 | Requires special tools for mounting |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 116.8 mm |
| Width | 48.3 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 14.4 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | 1/4" - 12 UNF 2B |
| Height | 302 mm |
| Outer diameter | 119 mm |
| Filter type | Spin-on Filter |
| Type | Oil Filter |
| Function | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 96 mm |
| Material | Rubber |
| Outer diameter | 75 mm |
| Inner diameter | 36 mm |
| Type | Bush, spring eye / Mount, leaf spring hanger |
| Function | Bush, spring eye / Mount, leaf spring hanger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 4 |
| Function | Sensor, intake manifold pressure |
| Type | Sensor, intake manifold pressure |
| for OE number | 036 906 051 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 217 mm |
| Internal Thread Size | 1" - 14 UNS |
| Outer diameter | 108 mm |
| Additional Information 2 | with seal ring |
| Filter type | Spin-on Filter, with water separator |
| Function | Fuel filter |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 1056 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 235 mm |
| Width | 78 mm |
| Material | Thermoplast, PU (Polyurethane) |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (174199)
- 2x Febi Rubber Buffer, suspension (103969)
Important compatibility info
| Type | Speedometer Cable |
| Length | 1420 mm |
| Function | Speedometer Cable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Coolant Pipe |
| Type | Coolant Pipe |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Tightening Torque | 25 Nm |
| Extra Description | febi Plus |
| Function | Cap, oil filter housing |
| Type | Cap, oil filter housing |
| Bolt Head/Nut Design | External Hexagon |
| Additional Information 2 | with seal ring |
| Spanner Size | 24 |
| Outer diameter | 65 mm |
| Height | 90.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 76.8 mm |
| Width | 65.6 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.3 mm |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with anti-squeak plate, with fastening material |
| Type | Brake Pad Set, disc brake |
| Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
| for OE number | 33 52 8 036 000 S1 |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 271 mm |
| Outer diameter | 98 mm |
| Spring Design | Coil spring with constant wire diameter |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Wire Diameter | 11.3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Tie Rod |
| Type | Tie Rod |
| Paired article numbers | 176917 |
| Placement on Vehicle | Front Axle Left |
| Additional Information | with lock nut |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (37593)
- 1x Febi Inner Tie Rod (39358)
Important compatibility info
| Function | Tie Rod |
| Type | Tie Rod |
| Paired article numbers | 176916 |
| Placement on Vehicle | Front Axle Right |
| Additional Information | with lock nut |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (37594)
- 1x Febi Inner Tie Rod (39358)
Important compatibility info
| Function | Brake Hose |
| Type | Brake Hose |
| Placement on Vehicle | outer, Rear Axle Right |
| Length | 700 mm |
| Paired article numbers | 182696 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Air Filter |
| Type | Air Filter |
| Filter type | Filter Insert |
| Width | 134 mm |
| Additional Information 2 | with pre-filter |
| Height | 39 mm |
| Length | 675 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 202 mm |
| Housing Diameter | 18 mm |
| Eject Force | 250 N |
| Stroke | 40 mm |
| Mounting points diameter | 17.8 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Housing length | 133.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Function | Washer Fluid Jet, headlight cleaning |
| Type | Washer Fluid Jet, headlight cleaning |
| Paired article numbers | 176288 |
| Placement on Vehicle | Right |
| Additional Information | with lift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Function | Washer Fluid Jet, headlight cleaning |
| Type | Washer Fluid Jet, headlight cleaning |
| Placement on Vehicle | Left |
| Paired article numbers | 176283 |
| Additional Information | with lift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 151.5 mm |
| Width | 60 mm. 66.3 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 19.5 mm |
| Function | Brake Pad Set, disc brake |
| Wear Warning Contact | prepared for wear warning indicator |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Fuel filter |
| Type | Fuel filter |
| Filter type | In-Line Filter, without connection for water sensor, without water separator |
| Height | 223 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
| for OE number | 1323.W7 |
| Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | without lid |
| Material | Plastic |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
| for OE number | 1323.AC |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | without lid |
| Material | Plastic |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
| for OE number | 1323.FA |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 66.5 mm |
| Placement on Vehicle | Front Axle |
| Width | 62.4 mm |
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
| Material | PU (Polyurethane) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (104212)
- 2x Febi Protective Cap/Bellow, shock absorber (103364)
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 42 mm |
| Outer diameter | 228 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 3.5 mm |
| Type | Brake Shoe Set |
| Function | Brake Shoe Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Upper, Front |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 32319 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Filter type | In-Line Filter, with water drain screw |
| Function | Fuel filter |
| Outer diameter | 98 mm |
| Additional Information | with valve |
| Height | 138 mm |
| Length | 138 mm |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 75 mm |
| Extra Description | febi Plus |
| Outer diameter | 86 mm |
| Bolt Head/Nut Design | External Hexagon |
| Tightening Torque | 25 Nm |
| Spanner Size | 36 |
| Type | Cap, oil filter housing |
| Function | Cap, oil filter housing |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Steering arm type | Control Arm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Lower, Front |
| Material | Steel |
| External Thread Size | M12 x 1,25 |
| Cone Size | 18 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Angled Ball Joint, steering push rod |
| Replaces | 24607 |
| External Thread Size | M24 x 1,5, M30 x 1,5 RHT |
| Length | 140 mm |
| Thread Type | with right-hand thread |
| Cone Size | 30 mm |
| Extra Description | ProKit |
| Type | Angled Ball Joint, steering push rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of mounting bores | 2 |
| Number of Connectors / Ports | 5 |
| Function | Switch Unit, ignition system |
| Additional Information | with grease |
| Type | Switch Unit, ignition system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Hose, air supply |
| Extra Description | febi Plus |
| Additional Information 2 | with quick couplers |
| Type | Hose, air supply |
| Inner diameter | 18 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with oil sump gasket |
| Length | 180 mm |
| Height | 71 mm |
| Width | 157 mm |
| Type | Hydraulic Filter Kit, automatic transmission |
| Function | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Lower, Front |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 40438 |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts, with nuts |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bolts/screws |
| Bolt / Nut Version | with lockwasher, with plain washer |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (32956)
- 1x Febi Nut (14392)
- 1x Febi Washer (40430)
- 1x Febi Washer (40434)
- 1x Febi Nut (37956)
- 1x Febi Screw (40423)
Important compatibility info
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Cable Length | 715 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left Rear |
| Length | 1484 mm |
| Paired article numbers | 193512 |
| Type | Cable Pull, parking brake |
| Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































