Proud to be a UK-based company
Contact us
Important compatibility info
| Length | 179 mm |
| Additional Information 2 | with rolling bearing |
| Inner diameter | 30 mm |
| Bearing Type | Rolling Bearing |
| Type | Suspension, propshaft |
| Function | Suspension, propshaft |
| Hole Spacing | 138 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.34
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 19766 |
| Function | Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M12 x 1,5 |
| Type | Tie Rod |
| Adjustable | Adjustable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.35
Important compatibility info
| Material | Rubber |
| Function | Seal, windscreen |
| Type | Seal, windscreen |
| Styling | without trim strip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.35
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 556 mm |
| Housing Diameter | 18 mm |
| Eject Force | 450 N |
| Stroke | 224 mm |
| Mounting points diameter | 17.8 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 302.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.35
Important compatibility info
| Height | 185 mm |
| Outer diameter | 83 mm |
| Additional Information 2 | with seal ring |
| Inner diameter | 11 mm |
| Filter type | Filter Insert |
| Type | Fuel Filter |
| Function | Fuel Filter |
| Gasket outer diameter | 98 mm |
| Gasket inner diameter | 90 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.35
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (40171)
- 1x Febi Rolling Bearing, suspension strut support mount (193569)
£24.35
Important compatibility info
| Filter type | In-Line Filter |
| Outer diameter | 75 mm |
| Length | 183 mm |
| Pipe Diameter | 8 mm |
| Function | Fuel filter |
| Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.35
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 172 mm |
| Material | Rubber/Metal |
| Inner diameter | 12 mm |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Height | 43 mm |
| Width | 172 mm |
| Outer diameter | 92 mm. 133 mm |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.36
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
| Outer diameter | 70 mm. 80 mm |
| Thickness | 65 mm |
| Inner diameter | 14 mm |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.36
Important compatibility info
| Length | 120 mm |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Outer diameter | 53 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.36
Important compatibility info
| Height | 176 mm |
| Outer diameter | 94 mm |
| Filter type | Spin-on Filter |
| Type | Oil Filter |
| Function | Oil Filter |
| Gasket outer diameter | 71.7 mm |
| Gasket inner diameter | 62.3 mm |
| Internal Thread Size | M27 x 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.36
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Lower, Outer, Rear Axle Right |
| Steering arm type | Control Arm |
| Material | Steel |
| Inner diameter 1 | 12 mm |
| Inner diameter 2 | 14 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.36
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 170 mm |
| Outer diameter | 85 mm |
| External Teeth, Wheel Side | 21 |
| Internal Teeth, wheel side | 22 |
| Type | Joint Kit, drive shaft |
| External Thread Size | M20 x 1,5 |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.36
Important compatibility info
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | MR961540 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.37
Important compatibility info
| Type | Splash Guard, brake disc |
| Extra Description | febi Plus |
| Function | Splash Guard, brake disc |
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 174959 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.37
Important compatibility info
| Material | PP (Polypropylene) |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
| Additional Information | with coolant level sensor |
| Number of Connectors / Ports | 2 |
| Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.37
Important compatibility info
| Cone Size | 29 mm |
| Function | Angled Ball Joint, steering push rod |
| Placement on Vehicle | Front Axle |
| Length | 126 mm |
| Extra Description | ProKit |
| External Thread Size | M20 x 1,5, M38 x 1,5 RHT |
| Type | Angled Ball Joint, steering push rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.38
Important compatibility info
| Function | Air Filter |
| Type | Air Filter |
| Filter type | Filter Insert |
| Width | 134 mm |
| Additional Information 2 | with pre-filter |
| Height | 39 mm |
| Length | 675 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.38
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 3030 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Additional Information | with bush |
| Resistance | 1250 Ohm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.38
Important compatibility info
| Placement on Vehicle | Front Axle |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (109593)
- 2x Febi Protective Cap/Bellow, shock absorber (196530)
£24.38
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023