Important compatibility info
Pump Type | Mono Pump |
Number of Connectors / Ports | 2 |
Voltage | 24 V |
for OE number | 1606929 |
Type | Washer Fluid Pump, headlight cleaning / Washer Fluid Pump, window cleaning |
Function | Washer Fluid Pump, headlight cleaning / Washer Fluid Pump, window cleaning |
Weight | 0.45 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thread Type | with left-hand thread |
Cone Size | 20 mm |
Function | Tie Rod End |
Weight | 0.800 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 105 mm |
Inner diameter | 30 mm |
External Thread Size | M18 x 1,5, M24 x 1,5 |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.012 kg |
Material | Rubber/Metal |
Placement on Vehicle | Rear Axle, Upper |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Thermostat, coolant |
Heating / Cooling | without vent hole |
Opening Temperature | 65 °C |
Weight | 0.112 kg |
Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M22 x 1,5, M12 x 1,75, M16 x 2 |
Additional Information | without piston |
Weight | 5.300 kg |
Type | Bellow, air suspension |
Function | Bellow, air suspension |
Outer diameter | 260 mm |
Thickness | 533 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.46 kg |
Placement on Vehicle | Rear Axle Right |
Paired article numbers | 171546 |
Type | Splash Guard, brake disc |
Function | Splash Guard, brake disc |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with crown nut |
Internal Thread Size | M12 x 1,25 |
Placement on Vehicle | Front Axle Right |
Length | 178 mm |
Material | Steel |
Paired article numbers | 34091 |
Function | Tie Rod End |
Weight | 0.49 kg |
External Thread Size | M10 x 1,25 |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Outer diameter | 105 mm |
Thickness | 10 mm |
Inner diameter | 82 mm |
Function | Shaft Seal, wheel hub |
Weight | 0.006 kg |
Type | Shaft Seal, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Outer diameter | 110 mm |
Inner diameter | 73 mm |
Height | 9.4 mm |
Weight | 0.17 kg |
Function | Rolling Bearing, suspension strut support mount |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Type | Rolling Bearing, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thread Size | M24x1,5 |
Type | Drive Shaft |
Wheel Sided Joint Diameter | 92.3 mm |
Paired article numbers | 183832 |
Weight | 7.836 kg |
Placement on Vehicle | Front Axle Left |
Additional Information | with axle nut |
Min. Length | 610 mm |
ABS Ring Diameter | 97 mm |
External Teeth, Diff.Side | 30 |
Additional Information 2 | with nut |
Transmission-side joint diameter | 92.3 mm |
External Teeth, Wheel Side | 31 |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.825 kg |
Length | 126 mm |
Material | Rubber |
Thickness | 117 mm |
Function | Rubber Buffer, suspension |
Type | Rubber Buffer, suspension |
Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.349 kg |
Function | Hydraulic Filter Kit, automatic transmission |
Width | 123 mm |
Height | 26 mm |
Length | 203 mm |
Additional Information | with gasket/seal |
Type | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Fuel Filter |
Material | Paper |
Outer diameter | 84 mm |
Filter type | Spin-on Filter |
Weight | 0.37 kg |
Housing material | Metal |
Height | 77 mm |
Internal Thread Size | M20 x 1,5 |
Function | Fuel Filter |
Gasket outer diameter | 61 mm |
Gasket inner diameter | 54 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.044 kg |
Function | Oil Filter |
Type | Oil Filter |
Seal Diameter | 73 mm |
Additional Information 2 | with seal ring |
Filter type | Filter Insert |
Inner diameter | 24 mm |
Outer diameter | 64 mm |
Height | 75 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Seal Material | Rubber |
Number of Wings | 7 |
Type | Water Pump, engine cooling |
Weight | 0.880 kg |
Number of Teeth | 20 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Additional Information 2 | with seal ring |
Material | Cast Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Rotor Style | Vented |
Surface | Coated |
Brake Disc Thickness | 30 mm |
Weight | 10.9 kg |
Type | Brake Disc Rotor |
Minimum thickness | 28.4 mm |
Bolt Hole Circle Diameter | 112 mm |
Function | Brake Disc |
Rim Hole Number | 5 -Hole |
Outer diameter | 335 mm |
Thickness | 45 mm |
Centering Diameter | 67 mm |
Number of mounting bores | 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Material | Plastic |
Outer diameter | 149 mm |
Thickness | 38.4 mm |
Weight | 0.406 kg |
Type | Rolling Bearing, suspension strut support mount |
Function | Rolling Bearing, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle, Wheel Side |
External Teeth, Wheel Side | 26 |
Internal Teeth, wheel side | 21 |
Weight | 1.58 kg |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.45 kg |
Voltage | 12 V |
Number of Connectors / Ports | 4 |
Function | Interior Blower |
Additional Information 2 | with bolts/screws |
Type | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Paired article numbers | 186364 |
Weight | 0.38 kg |
Type | Hinge, bonnet |
Function | Hinge, bonnet |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023