Important compatibility info
Length | 2178 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 10 |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with anti-squeak plate, with fastening material |
Placement on Vehicle | Front Axle |
Length | 130 mm |
Width | 56.8 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 16.8 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Filter type | Filter Insert |
Type | Air Filter |
Outer diameter | 82 mm |
Inner diameter | 73 mm |
Height | 312 mm |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right, Upper, Rear |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 21892 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | without stop function |
Mounting points diameter | 18 mm |
Housing length | 395.5 mm |
Placement on Vehicle | both sides |
Length | 667 mm |
Eject Force | 755 N |
Stroke | 238 mm |
Housing Diameter | 22 mm |
Piston conrod diameter | 10 mm |
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | PP (Polypropylene) |
Function | Expansion Tank, coolant |
Type | Expansion Tank, coolant |
Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 3 |
Function | Sensor, crankshaft pulse |
Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Tie Rod End |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 145 mm |
Cone Size | 28.6 mm |
Internal Thread Size | M30 x 1,5 RHT |
External Thread Size | M20 x 1,5 |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information 2 | with crown nut |
Thread Type | with right-hand thread |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Centre, Left |
Type | Roller Guide, sliding door |
Function | Roller Guide, sliding door |
Extra Description | febi Plus |
Paired article numbers | 47765 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, wheel speed |
Placement on Vehicle | Front Axle Left |
Number of Connectors / Ports | 2 |
Type | Sensor, wheel speed |
Paired article numbers | 186095 |
Cable Length | 1000 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Outer diameter | 35 mm |
Number of Holes | 4 |
Bolt Hole Circle Diameter | 100 mm |
Function | Wheel Hub |
Type | Wheel Hub |
Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, automatic transmission |
Placement on Vehicle | Rear |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with top |
Width of castor bearing surface | 26 mm |
Material | Plastic |
Outer diameter | 65 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Function | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cone Size | 32 mm |
Pipe Diameter | 40 mm |
Thread Type | with left-hand thread |
Placement on Vehicle | Front Axle |
Length | 120 mm |
Paired article numbers | 18885 |
External Thread Size | M27 x 1,5, M30 x 1,5 LHT |
Extra Description | ProKit |
Additional Information | with lock nut |
Type | Angled Ball Joint, steering push rod / Tie Rod End |
Function | Angled Ball Joint, steering push rod / Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (27482)
- 1x Febi Nut (26529)
Important compatibility info
Function | Sensor, crankshaft pulse |
Type | Sensor, crankshaft pulse |
Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 11 mm |
Number of Connectors / Ports | 3 |
Function | Sensor, camshaft position |
Length | 56.9 mm |
Type | Sensor, camshaft position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 188 mm |
Width | 73.3 mm. 80.7 mm |
Brake System | Lucas |
Wear Warning Contact | prepared for wear warning indicator |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 19 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information 2 | with piston clip, with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cone Size | 30 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 120 mm |
Inner diameter | 40 mm |
Thread Type | with left-hand thread |
Paired article numbers | 15616 |
Function | Tie Rod End |
Internal Thread Size | M38 x 1,5 LHT |
Extra Description | ProKit |
External Thread Size | M24 x 1,5 |
Type | Tie Rod End |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cone Size | 30 mm |
Placement on Vehicle | Front Axle Right |
Thread Type | with right-hand thread |
Inner diameter | 40 mm |
Paired article numbers | 15615 |
Internal Thread Size | M38 x 1,5 RHT |
Pipe Diameter | 40 mm |
Function | Tie Rod End |
Length | 120 mm |
External Thread Size | M24 x 1,5 |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left |
Length | 3075 mm |
Paired article numbers | 106485 |
Number of Connectors / Ports | 2 |
Resistance | 1150 Ohm |
Cable Length | 2834 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Right |
Paired article numbers | 104522 |
Number of Connectors / Ports | 2 |
Resistance | 1150 Ohm |
Cable Length | 2960 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M14 x 2 |
Outer diameter | 120 mm |
Height | 305 mm |
Type | Fuel filter |
Function | Fuel filter |
Filter type | Spin-on Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with squeeze connector |
Type | Sensor, coolant temperature |
Function | Sensor, coolant temperature |
for OE number | 1 865 315 |
Additional Information 2 | with connection line |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Tappet |
Operating Mode | Hydraulic |
Thickness | 24 mm |
Outer diameter | 30 mm |
Placement on Vehicle | Intake Side, Exhaust Side |
Type | Tappet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width of castor bearing surface | 38.5 mm |
Material | Plastic |
Outer diameter | 74 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Placement on Vehicle | Upper Right |
Additional Information 2 | with quick couplers |
Function | Radiator Hose |
Type | Radiator Hose |
Cooling Hose | from thermostat to radiator |
Hose Length | 285 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 272 mm |
Outer diameter | 119 mm |
Function | Suspension Spring |
Wire Diameter | 11.5 mm |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Fuel filter |
Pipe Diameter | 11.5 mm |
Function | Fuel filter |
Additional Information | with valve |
Filter type | In-Line Filter, with connection for water sensor, with water drain screw |
Height | 143 mm |
Outer diameter | 98 mm |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 26.5 mm |
Number of Teeth | 124 |
Belts | with trapezoidal tooth profile |
Function | Timing Belt |
Type | Timing Belt |
Replaces | 12669 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 109.9 mm |
Width | 64 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 15.8 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Oil Pressure Switch |
Function | Oil Pressure Switch |
Number of Connectors / Ports | 2 |
Spanner Size | 27 |
Length | 64 mm |
Shifting Points | 3 bar |
Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Splash Guard, brake disc |
Extra Description | febi Plus |
Placement on Vehicle | Front Axle Right |
Paired article numbers | 176764 |
Type | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1051 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 7 |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Additional Information 2 | Requires special tools for mounting |
Chemical Properties | Elastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Right |
Paired article numbers | 19808 |
Cone Size | 19 mm |
Function | Ball Joint |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left |
Paired article numbers | 19810 |
Cone Size | 19 mm |
Function | Ball Joint |
Mounting points diameter | 18 mm |
External Thread Size | M8 x 1,25 |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Placement on Vehicle | Front Axle |
Function | Repair Kit, suspension strut support mount |
Extra Description | ProKit |
Type | Repair Kit, suspension strut support mount |
Additional Information 2 | with fastening material, with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (45677)
- 1x Febi Rolling Bearing, suspension strut support mount (10091)
- 1x Febi Spring Seat (37165)
- 1x Febi Nut (37805)
- 1x Febi Nut (37801)
Important compatibility info
Length | 140 mm |
Width | 68 mm |
Thickness | 120 mm |
Thread Type | with right-hand thread |
Cone Size | 30 mm |
Function | Angled Ball Joint, steering push rod |
External Thread Size | M24 x 1,5, M32 x 1,5 RHT |
Extra Description | ProKit |
Type | Angled Ball Joint, steering push rod |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Tie Rod |
Paired article numbers | 44923 |
Placement on Vehicle | Front Axle Left |
Extra Description | ProKit |
Additional Information | with nuts |
Type | Tie Rod |
Additional Information 2 | with clamps, with steering bellow |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (31970)
- 1x Febi Tie Rod End (31971)
- 1x Febi Bellow Kit, steering (44797)
Important compatibility info
Width | 44 mm |
Outer diameter | 104 mm |
Inner diameter | 43 mm |
Number of Ribs | 3 |
Parameter | 4PK |
Function | Belt Pulley, crankshaft |
Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 182 mm |
Outer diameter | 57 mm |
Filter type | In-Line Filter, Pre-filter |
Function | Fuel filter |
Type | Fuel filter |
Pipe Diameter | 10 mm. 12 mm |
Housing material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with quick couplers |
Placement on Vehicle | Lower Right |
Function | Radiator Hose |
Cooling Hose | from thermostat to radiator |
Type | Radiator Hose |
for OE number | 11 53 1 705 224 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 17 mm |
Filter type | Filter Insert |
Seal Diameter | 123 mm. 105 mm. 38 mm |
Type | Fuel filter |
Function | Fuel filter |
Outer diameter | 97 mm |
Height | 181 mm |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Hydraulic Filter Kit, automatic transmission |
Function | Hydraulic Filter Kit, automatic transmission |
Additional Information 2 | with seal ring, with bolts/screws |
Additional Information | with gasket/seal |
Seal Material | Paper |
Filter type | Screen Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gasket, automatic transmission oil sump (29894)
- 1x Febi Seal Ring, hydraulic filter (11673)
- 2x Febi Screw (11674)
Important compatibility info
Material | NBR (nitrile butadiene rubber) |
Outer diameter | 69 mm |
Inner diameter | 62 mm |
Inner diameter 1 | 34 mm |
Inner diameter 2 | 21 mm |
Outer diameter 1 | 46 mm |
Outer diameter 2 | 26 mm |
Function | Intake Hose, air filter |
Extra Description | febi Plus |
Type | Intake Hose, air filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 155.1 mm |
Width | 63 mm. 68 mm |
Brake System | ATE |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17.8 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Opening Temperature | 88 °C |
Function | Thermostat Housing |
Type | Thermostat Housing |
Additional Information | with gasket/seal |
Additional Information 2 | with Temperature Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 825 mm |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Lock System | with two keys, with lock |
Additional Information | with chain |
Outer diameter | 97 mm |
Thickness | 60 mm |
Colour | Blue |
Function | Sealing Cap, tank unit (Urea injection) |
Type | Sealing Cap, tank unit (Urea injection) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 58 mm |
Spanner Size | 19 |
Function | Sensor, coolant temperature |
Internal Thread Size | M14 x 1,5 |
Type | Sensor, coolant temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Repait Kit, spring bearing frame |
Function | Repait Kit, spring bearing frame |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bushing, leaf spring hanger (104165)
- 1x Febi Seal Ring, spring bush (spring eye) (104166)
- 1x Febi Bushing, leaf spring hanger (104167)






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023