Important compatibility info
Weight | 0.200 kg |
Placement on Vehicle | Left Rear |
Length | 416 mm |
Housing Diameter | 18 mm |
Eject Force | 260 N |
Stroke | 160 mm |
Mounting points diameter | 8 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 220.5 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.340 kg |
Length | 2338 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 9 |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.6 kg |
Function | Expansion Tank, coolant |
Additional Information | with coolant level sensor |
Material | Plastic |
Type | Expansion Tank, coolant |
Additional Information 2 | without lid |
for OE number | 8D0 121 403 L |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Gasket Set, cylinder head cover |
Weight | 0.081 kg |
Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gasket, cylinder head cover (47926)
- 4x Febi Gasket, cylinder head cover (36912)
- 1x Febi Seal, oil filler neck cap (36913)
Important compatibility info
Weight | 0.129 kg |
Placement on Vehicle | transmission sided |
Height | 12.2 mm |
Outer diameter | 113 mm |
Inner diameter | 88 mm |
Function | Shaft Seal, crankshaft |
Material | FKM (fluorocarbon rubber) |
Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Width | 40 mm |
Outer diameter | 170 mm |
Function | Brake Shoe Set, parking brake |
Thickness/Strength 1 | 3.3 mm |
Inspection Tag | ECE R90 Approved |
Weight | 2.088 kg |
Type | Brake Shoe Set, parking brake |
for OE number | 002 420 59 20 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left, Rear |
Weight | 0.450 kg |
for OE number | 31277444 |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Weight | 1.082 kg |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.39 kg |
Placement on Vehicle | Rear Axle |
Length | 100 mm |
Width | 108 mm |
Material | Rubber/Metal |
Outer diameter | 65 mm. 68 mm |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Height | 35 mm |
Additional Information 2 | without ball bearing |
Inner diameter | 13 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.615 kg |
Placement on Vehicle | Rear Axle Left |
Paired article numbers | 19810 |
Cone Size | 19 mm |
Function | Ball Joint |
Mounting points diameter | 18 mm |
External Thread Size | M8 x 1,25 |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.05 kg |
Number of Connectors / Ports | 2 |
Function | Resistor, interior blower |
Extra Description | febi Plus |
Type | Resistor, interior blower |
for OE number | 51926262 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.270 kg |
Material | Metal |
Outer diameter | 75.5 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Inner diameter | 17 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Mounting points diameter | 17 mm |
Width of castor bearing surface | 33.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness/Strength 1 | 17.3 mm |
Function | Brake Pad Set, disc brake |
Placement on Vehicle | Rear Axle |
Inspection Tag | ECE R90 Approved |
Length | 106 mm |
Width | 55.4 mm. 51.9 mm |
Type | Brake Pad Set, disc brake |
Weight | 1.050 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Length | 402 mm |
Housing Diameter | 18 mm |
Eject Force | 480 N |
Stroke | 139 mm |
Mounting points diameter | 16.5 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 217 mm |
Weight | 0.19 kg |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 20 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Bushing, axle beam |
Thickness | 88 mm |
Placement on Vehicle | Rear, Rear Axle Left, Rear Axle Right |
Material | Rubber/Metal |
Outer diameter | 80 mm |
Weight | 0.67 kg |
Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 4 -Hole |
Weight | 2.850 kg |
Rotor Style | Solid |
Placement on Vehicle | Rear Axle |
Outer diameter | 239 mm |
Thickness | 33.1 mm |
Brake Disc Thickness | 9 mm |
Minimum thickness | 8 mm |
Bolt Hole Circle Diameter | 100 mm |
Centering Diameter | 61 mm |
Surface | Coated |
Number of mounting bores | 2 |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Washer Fluid Pump, headlight cleaning |
Voltage | 12 V |
Number of Connectors / Ports | 2 |
Pump Type | Dual Pump |
Weight | 0.126 kg |
Type | Washer Fluid Pump, headlight cleaning |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber |
Function | Gasket Set, cylinder head cover |
for OE number | 11 12 0 034 107 |
Type | Gasket Set, cylinder head cover |
Weight | 0.157 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gasket, cylinder head cover (01572)
- 2x Febi Gasket, cylinder head cover (09766)
Important compatibility info
Weight | 0.200 kg |
Placement on Vehicle | both sides |
Length | 311 mm |
Housing Diameter | 19 mm |
Eject Force | 570 N |
Stroke | 84 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 181 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.590 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Type | Inner Tie Rod |
Function | Inner Tie Rod |
Extra Description | ProKit |
Additional Information 2 | with clamps, with nut, with steering bellow |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (27301)
- 1x Febi Bellow Kit, steering (27128)






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023