Proud to be a UK-based company
Contact us
Important compatibility info
| Material | Aluminium |
| Inner diameter | 16 mm |
| Colour | Yellow |
| Weight | 1.08 kg |
| Placement on Vehicle | Front |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.54
Important compatibility info
| Weight | 0.08 kg |
| Outer diameter | 35 mm |
| Opening Temperature | 82 °C |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.54
Important compatibility info
| Material | Thermoplastic polyester elastomer |
| Inner diameter 1 | 28 mm |
| Inner diameter 2 | 90 mm |
| Weight | 0.178 kg |
| Joint Type | Tripod Joint |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Placement on Vehicle | Wheel Side, Front Axle Right, Front Axle Left |
| Length | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (184408)
- 1x Febi Molybdenum Grease (02582)
£25.54
Important compatibility info
| Outer diameter | 60 mm |
| Weight | 0.265 kg |
| Type | Tensioner Pulley, timing belt |
| Function | Tensioner Pulley, timing belt |
| Width of castor bearing surface | 32 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.54
Important compatibility info
| Weight | 1.230 kg |
| Height | 450 mm |
| Additional Information | with gasket/seal |
| Outer diameter | 182 mm |
| Inner diameter | 155 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.54
Important compatibility info
| Weight | 1.514 kg |
| Number of Teeth, ABS ring | 48 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 20 |
| External Thread Size | M20 x 1,5 |
| Placement on Vehicle | Wheel Side |
| External Teeth, Wheel Side | 24 |
| ABS Ring Diameter | 76 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.54
Important compatibility info
| Weight | 0.13 kg |
| Housing material | Aluminium |
| Placement on Vehicle | both sides |
| Length | 279 mm |
| Housing Diameter | 20 mm |
| Eject Force | 520 N |
| Stroke | 95 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 162.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.54
Important compatibility info
| Function | Mounting, engine |
| Weight | 0.800 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Placement on Vehicle | Right |
| for OE number | 1806.34 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.54
Important compatibility info
| Weight | 0.012 kg |
| Number of Connectors / Ports | 3 |
| Function | Sensor, intake manifold pressure |
| Type | Sensor, intake manifold pressure |
| for OE number | 25085-00Q0B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.54
Important compatibility info
| Function | Brake Hose |
| Type | Brake Hose |
| Weight | 0.135 kg |
| Paired article numbers | 182697 |
| Length | 710 mm |
| Placement on Vehicle | Rear Axle Left, outer |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.54
Important compatibility info
| Housing length | 184.5 mm |
| Mounting points diameter | 15 mm |
| Placement on Vehicle | both sides |
| Length | 314 mm |
| Eject Force | 485 N |
| Stroke | 92 mm |
| Housing Diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Weight | 0.171 kg |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.54
Important compatibility info
| Weight | 0.03 kg |
| Type | Sensor, coolant temperature |
| Function | Sensor, coolant temperature |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.54
Important compatibility info
| Weight | 0.057 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 1056 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.54
Important compatibility info
| Weight | 0.120 kg |
| Material | FKM (fluorocarbon rubber) |
| Outer diameter | 22.6 mm |
| Valve stem diameter | 5 mm |
| Type | Seal Set, valve stem |
| Function | Seal Set, valve stem |
| Height | 18 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.54
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 25 |
| Internal Teeth, wheel side | 24 |
| Weight | 1.966 kg |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.54
Important compatibility info
| Height | 152 mm |
| Function | Cap, oil filter housing |
| Tightening Torque | 25 Nm |
| Outer diameter | 92 mm |
| Extra Description | febi Plus |
| Bolt Head/Nut Design | Male Hex |
| Spanner Size | 36 |
| Type | Cap, oil filter housing |
| Weight | 0.175 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.55
Important compatibility info
| Function | Sensor, wheel speed |
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 106636 |
| Number of Connectors / Ports | 2 |
| Cable Length | 1864 mm |
| Weight | 0.072 kg |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.55
Important compatibility info
| Placement on Vehicle | transmission sided |
| Width | 140 mm |
| Outer diameter | 172 mm |
| Inner diameter | 92 mm |
| Function | Shaft Seal, crankshaft |
| Seal Material | FPM (fluoride rubber) |
| Weight | 0.181 kg |
| Type | Shaft Seal, crankshaft |
| Additional Information 2 | with flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.55
Important compatibility info
| Weight | 0.720 kg |
| Placement on Vehicle | Rear, Lower |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 1348993080 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.55
Important compatibility info
| Housing length | 278 mm |
| Mounting points diameter | 18 mm |
| Placement on Vehicle | both sides |
| Length | 506 mm |
| Eject Force | 610 N |
| Stroke | 197 mm |
| Housing Diameter | 22 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Weight | 0.353 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.56
Important compatibility info
| Weight | 0.02 kg |
| for OE number | 39300-03000 |
| Type | Sensor, intake manifold pressure |
| Number of Connectors / Ports | 4 |
| Function | Sensor, intake manifold pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.56
Important compatibility info
| Function | Sensor, coolant temperature |
| Type | Sensor, coolant temperature |
| Colour | Black |
| Number of Connectors / Ports | 3 |
| Weight | 0.03 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.56
Important compatibility info
| Function | Radiator Hose |
| Type | Radiator Hose |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Additional Information | with quick coupling |
| for OE number | 1 511 620 |
| Inner diameter | 57 mm |
| Colour | Black |
| Weight | 0.56 kg |
| Hose Length | 215 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.56
Important compatibility info
| Weight | 2.000 kg |
| Length | 61.7 mm |
| Width | 56.5 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Thickness/Strength 1 | 15 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Placement on Vehicle | Rear Axle, Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.56
Important compatibility info
| Weight | 1.350 kg |
| Placement on Vehicle | Rear Axle |
| Width | 32 mm |
| Outer diameter | 180 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 4.5 mm |
| Type | Brake Shoe Set |
| Function | Brake Shoe Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.57
Important compatibility info
| Outer diameter | 175 mm |
| Inner diameter | 135 mm |
| Function | Shaft Seal, wheel bearing |
| Weight | 0.607 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, outer |
| Material | FPM (fluoride rubber), ACM (Polyacrylate) |
| Width | 18 mm |
| Type | Shaft Seal, wheel bearing |
| Additional Information 2 | with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.57
Important compatibility info
| Weight | 0.386 kg |
| Type | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Front Axle |
| for OE number | 98 203 663 80 S1 |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (186205)
- 2x Febi Protective Cap/Bellow, shock absorber (175629)
£25.57
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Sensor, speed |
| Type | Sensor, speed |
| Weight | 0.03 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.57
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Weight | 0.206 kg |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.57
Important compatibility info
| Weight | 0.378 kg |
| Height | 393 mm |
| Outer diameter | 135 mm |
| Inner diameter | 115 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.57
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023