Important compatibility info
| Width | 38 mm |
| Outer diameter | 80 mm |
| Inner diameter | 43 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with nut, with retaining ring |
| Additional Information | with drive shaft bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Circlip (04903)
- 1x Febi Nut (05038)
- 1x Febi Axle Bolt, drive shaft (22462)
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Inner diameter | 45 mm |
| Outer diameter | 84 mm |
| Width | 39 mm |
| Type | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Screw (02102)
- 1x Febi Nut, kingpin (02346)
- 6x Febi Bolt, drive shaft flange (02592)
- 2x Febi Cover Plate, dust-cover wheel bearing (02356)
- 1x Febi Circlip (03405)
- 1x Febi Bolt, brake disc (21663)
Important compatibility info
| Bearing Type | Tapered Roller Bearing |
| Outer diameter 2 | 45 mm |
| Width 2 | 17 mm |
| Function | Wheel Bearing Kit |
| Width 1 | 20 mm |
| Outer diameter 1 | 68 mm |
| Inner diameter 2 | 22 mm |
| Inner diameter 1 | 40 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with shaft seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (05417)
- 1x Febi Shaft Seal, wheel hub (28257)
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 460 mm |
| Housing Diameter | 18 mm |
| Eject Force | 100 N |
| Stroke | 164 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, rear window |
| Housing length | 266.5 mm |
| Type | Gas Spring, rear window |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Width | 45 mm |
| Outer diameter | 80 mm |
| Inner diameter | 42 mm |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with retaining ring, with shaft seal |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle, Outer |
| Width | 35 mm |
| Outer diameter | 72 mm |
| Inner diameter | 28 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Bearing / Wheel Bearing |
| Type | Bearing / Wheel Bearing |
| Bearing Code | 33207 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket Set, cylinder head cover |
| Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bearing Type | Grooved Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Inner diameter | 40 mm |
| Outer diameter | 90 mm |
| Width | 23 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Cable Length | 555 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting, control/trailing arm |
| Additional Information | with nuts |
| Function | Mounting, control/trailing arm |
| Inner diameter | 14.5 mm |
| Additional Information 2 | with bolts/screws |
| Thickness | 69 mm |
| Outer diameter | 69 mm |
| Material | Rubber/Metal |
| Placement on Vehicle | Front, Front Axle Left, Front Axle Right |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (104366)
- 2x Febi Securing Bolt (174650)
- 1x Febi Screw (40708)
- 1x Febi Nut (174651)
- 1x Febi Nut (05360)
Important compatibility info
| Joint Type | CV Joint |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 34 mm |
| Material | Thermoplastic polyester elastomer |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 72 mm |
| Length | 110 mm |
| Placement on Vehicle | transmission sided |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (178711)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Width | 33 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Wheel Bearing |
| Function | Wheel Bearing |
| Outer diameter | 85 mm |
| Inner diameter | 40 mm |
| Bearing Type | Tapered Roller Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 37 mm |
| Inner diameter | 37 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Additional Information | with axle nut |
| Outer diameter | 72 mm |
| Additional Information 2 | with integrated magnetic sensor ring, with grease cap, with retaining ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | frontal sided |
| Width | 8 mm |
| Material | PTFE (polytetrafluoroethylene) |
| Outer diameter | 68 mm |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
| Inner diameter | 55 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Electric |
| Type | Actuator, central locking system |
| Function | Actuator, central locking system |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 380 mm |
| Material | Sheet Steel |
| Width | 160 mm |
| Thickness | 190 mm |
| Surface | Zinc-coated |
| DIN / ISO | 76051 |
| Radius | 460 mm |
| Function | Wheel Chock |
| Type | Wheel Chock |
| Additional Information 2 | Handle in housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thread Type | with right-hand thread |
| Cone Size | 30 mm |
| Function | Tie Rod End |
| External Thread Size | M24 x 1,5, M30 x 1,5 RHT |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 146 mm |
| Inner diameter | 52 mm |
| Additional Information | with lock nut |
| Extra Description | ProKit |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 2642 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 8 |
| Function | V-Ribbed Belt |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inspection Tag | ECE R90 Approved |
| Function | Brake Pad Set, disc brake |
| Wear Warning Contact | with acoustic wear warning |
| Width | 59.9 mm |
| Thickness/Strength 1 | 17.7 mm |
| Length | 168.5 mm |
| Placement on Vehicle | Front Axle |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| Cable Length | 884 mm |
| Function | Sensor, wheel speed |
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 172428 |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with screw |
| Spanner Size | 24 |
| Paired article numbers | 185154 |
| Cone Size | 16 mm |
| Type | Tie Rod End |
| Function | Tie Rod End |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M16 x 1,5 |
| Length | 138 mm |
| Placement on Vehicle | Front Axle Right, outer |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gasket/seal |
| Type | Coolant Flange |
| Function | Coolant Flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 143 mm |
| Width | 40 mm |
| Thickness | 75 mm |
| Spanner Size | 19 |
| Function | Tie Rod End |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M16 x 1,5 |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle, Front Axle |
| Type | Repair Kit, brake caliper |
| Function | Repair Kit, brake caliper |
| for OE number | 1 906 779 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness/Strength 1 | 15.9 mm |
| Function | Brake Pad Set, disc brake |
| Placement on Vehicle | Front Axle |
| Width | 81.4 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Type | Brake Pad Set, disc brake |
| Length | 135.7 mm |
| Additional Information 2 | with piston clip, with anti-squeak plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Hydraulic Filter Kit, automatic transmission |
| Additional Information | with gasket/seal |
| Type | Hydraulic Filter Kit, automatic transmission |
| Seal Material | Rubber |
| Filter type | Screen Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gasket, automatic transmission oil sump (32643)
- 1x Febi Hydraulic Filter, automatic transmission (14256)
Important compatibility info
| Function | Alternator Freewheel Clutch |
| Number of Ribs | 6 |
| Inner diameter | 17 mm |
| Additional Information 2 | with lid |
| Type | Alternator Freewheel Clutch |
| Width | 41 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width of castor bearing surface | 27 mm |
| Width | 43 mm |
| Material | Metal |
| Outer diameter | 70 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Suspension Spring |
| Placement on Vehicle | Front Axle |
| Function | Suspension Spring |
| Length | 333 mm |
| Outer diameter | 150 mm |
| Number of Coils | 4.3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with fastening material |
| Inspection Tag | ECE R90 Approved |
| Cable Length | 225 mm |
| Width | 53.1 mm |
| Wear Warning Contact | incl. wear warning contact |
| Length | 122.7 mm |
| Thickness/Strength 1 | 17 mm |
| Function | Brake Pad Set, disc brake |
| Placement on Vehicle | Front Axle |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Bushing, axle beam |
| Thickness | 92 mm |
| Material | Rubber/Metal |
| Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Splash Guard, brake disc |
| Paired article numbers | 174630 |
| Placement on Vehicle | Rear Axle Right |
| Extra Description | febi Plus |
| Function | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 50 mm |
| Number of Ribs | 14 |
| Function | Oil Cooler, engine oil |
| Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Aluminium |
| Inner diameter | 30 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with rolling bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (26321)
- 1x Febi Bearing, propshaft centre bearing (05362)
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 380 mm |
| Outer diameter | 131 mm |
| Function | Suspension Spring |
| Wire Diameter | 13 mm |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Placement on Vehicle | Front |
| Bearing/Mounting Type | Rubber-Metal Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Bracket, stabiliser mounting |
| Bore Diameter | 96 mm |
| Radius | 38.5 mm |
| Type | Bracket, stabiliser mounting |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Cable Length | 500 mm |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 174511 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Control Type | Rotary Operation |
| Function | Ignition Switch |
| Number of Connectors / Ports | 7 |
| Extra Description | febi Plus |
| Type | Ignition Switch |
| Colour | black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing length | 401 mm |
| Function | Gas Spring, bonnet |
| Piston conrod diameter | 8 mm |
| Stroke | 320 mm |
| Mounting points diameter | 18 mm |
| Housing Diameter | 18 mm |
| Eject Force | 340 N |
| Placement on Vehicle | Left |
| Length | 762 mm |
| Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle, Front and Rear |
| Outer diameter | 60 mm |
| Inner diameter | 22 mm |
| Material | Rubber/Metal |
| Length | 76 mm |
| Function | Bush, spring eye |
| Type | Bush, spring eye |
| Shape/Form | slotted |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Spring Seat |
| Material | Rubber/Metal |
| Width | 173 mm |
| Height | 80 mm |
| Placement on Vehicle | Front Axle |
| Type | Spring Seat |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
| Extra Description | febi Plus |
| Type | Oil Line, charger |
| for OE number | 0379.68 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Sensor, crankshaft pulse |
| Function | Sensor, crankshaft pulse |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Fuel Filter |
| Outer diameter | 84 mm |
| Filter type | Spin-on Filter |
| Inner diameter | 22 mm |
| Function | Fuel Filter |
| Height | 198 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Teeth, wheel side | 33 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| Thread Size | M16x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear |
| for OE number | 46528872 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Pneumatic |
| External Thread Size | M8 x 1,25 |
| Function | Fuel Cut-off, injection system |
| Type | Fuel Cut-off, injection system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































