Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Type | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 22 |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 27 |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 346 mm |
| Outer diameter | 152 mm |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Wire Diameter | 12.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thread Type | with right-hand thread |
| for OE number | 81.95301.6362 |
| Placement on Vehicle | Front Axle |
| Length | 195 mm |
| Cone Size | 22 mm |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Extra Description | ProKit |
| External Thread Size | M18 x 1,5, M30 x 1,5 RHT |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Paper |
| Number of Teeth | 20 |
| Number of Wings | 8 |
| Additional Information | with gasket/seal |
| Housing material | Cast Aluminium |
| Type | Water Pump, engine cooling |
| for OE number | 1201.91 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 17 mm |
| Number of Teeth | 100 |
| Belts | with rounded tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Function | Oil Line, charger |
| Type | Oil Line, charger |
| Forward- /Backflow | Return Line |
| Paired article numbers | 185036 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 30 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (04842)
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 131.4 mm |
| Width | 65.3 mm. 53.5 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.6 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Length | 730 mm |
| Housing Diameter | 18 mm |
| Eject Force | 265 N |
| Stroke | 308 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, bonnet |
| Function | Gas Spring, bonnet |
| Housing length | 392 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 171614 |
| Number of Connectors / Ports | 2 |
| Resistance | 1700 Ohm |
| Cable Length | 2375 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 171611 |
| Number of Connectors / Ports | 2 |
| Resistance | 1700 Ohm |
| Cable Length | 2347 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 176 mm |
| Outer diameter | 94 mm |
| Filter type | Spin-on Filter |
| Type | Oil Filter |
| Function | Oil Filter |
| Gasket outer diameter | 71.7 mm |
| Gasket inner diameter | 62.3 mm |
| Internal Thread Size | M27 x 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left Front |
| Additional Information | without bulb |
| Paired article numbers | 197663 |
| Colour | Crystal clear |
| Type | Direction Indicator |
| Fulfils ECE norm | R6 |
| Function | Direction Indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Number of Connectors / Ports | 3 |
| Brake Type | Disc Brake |
| Cable Length | 2230 mm |
| Type | Warning Contact, brake pad wear |
| Function | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 354 mm |
| Function | Suspension Spring |
| Wire Diameter | 11.8 mm |
| Type | Suspension Spring |
| Outer diameter | 148 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 1910 mm |
| Paired article numbers | 104567 |
| Number of Connectors / Ports | 2 |
| Resistance | 1700 Ohm |
| Cable Length | 1850 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| Cable Length | 1110 mm |
| Function | Sensor, wheel speed |
| Resistance | 1750 Ohm |
| Type | Sensor, wheel speed |
| Placement on Vehicle | Front Axle Left |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 60 mm |
| Type | Pressure Limiting Valve |
| Opening Pressure | 14 bar |
| Function | Pressure Limiting Valve |
| External Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 22 mm |
| Outer diameter | 172 mm |
| Inspection Tag | ECE R90 Approved |
| Type | Brake Shoe Set, parking brake |
| Function | Brake Shoe Set, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Length | 355 mm |
| Width | 265 mm |
| Thickness | 65 mm |
| Colour | black |
| Type | Cover, exterior mirror |
| Function | Cover, exterior mirror |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 20 mm |
| Number of Teeth | 163 |
| Belts | with rounded tooth profile |
| Function | Timing Belt |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | V-Ribbed Belt |
| Length | 1400 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 7 |
| One-sided / Double-sided | Double-sided |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Material | FPM (fluoride rubber) |
| Thickness | 13 mm. 18.5 mm |
| Inner diameter | 85 mm |
| Function | Shaft Seal, differential |
| Outer diameter | 105 mm |
| Type | Shaft Seal, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 790 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Function | Mounting and Bolting Kit, control/trailing arm |
| Steering arm type | Control Arm |
| Type | Mounting and Bolting Kit, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Screw (21475)
- 6x Febi Nut (14392)
- 2x Febi Nut (24795)
- 2x Febi Screw (24796)
- 2x Febi Screw (21476)
- 4x Febi Screw (31032)
- 4x Febi Nut (22263)
- 2x Febi Nut (32615)
- 2x Febi Bolt, control arm (39749)
- 2x Febi Washer (39748)
- 4x Febi Screw (21919)
- 2x Febi Nut (24799)
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Length | 75 mm |
| Material | Steel |
| Spanner Size | 17 |
| Paired article numbers | 42966 |
| Rod/Strut | Coupling Rod |
| Colour | Silver |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,25 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Length | 75 mm |
| Material | Steel |
| Spanner Size | 17 |
| Paired article numbers | 42959 |
| Rod/Strut | Coupling Rod |
| Colour | Silver |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,25 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 18 mm. 20 mm |
| Outer diameter | 68 mm. 78 mm |
| Inner diameter | 41 mm. 45 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (173865)
Important compatibility info
| Type | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Rear Axle |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 570 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M18 x 1,5, M30 x 1,5 LHT |
| Extra Description | ProKit |
| for OE number | 81.95301.6363 |
| Placement on Vehicle | Front Axle |
| Length | 195 mm |
| Function | Angled Ball Joint, steering push rod / Tie Rod End |
| Cone Size | 22 mm |
| Type | Angled Ball Joint, steering push rod / Tie Rod End |
| Thread Type | with left-hand thread |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Aluminium |
| Inner diameter | 16 mm |
| Colour | Yellow |
| Placement on Vehicle | Front |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 14 mm |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Chain Type | Simplex, with chain lock |
| Number of Chain Links | 96 |
| Function | Timing Chain |
| Timing Chain Size | G68WN, G68V |
| Type | Timing Chain |
| Additional Information 2 | Requires special tools for mounting |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing length | 184.5 mm |
| Mounting points diameter | 15 mm |
| Placement on Vehicle | both sides |
| Length | 314 mm |
| Eject Force | 485 N |
| Stroke | 92 mm |
| Housing Diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing material | Aluminium |
| Placement on Vehicle | both sides |
| Length | 279 mm |
| Housing Diameter | 20 mm |
| Eject Force | 520 N |
| Stroke | 95 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 162.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 459 mm |
| Housing Diameter | 18 mm |
| Eject Force | 320 N |
| Stroke | 145 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width of castor bearing surface | 26 mm |
| Outer diameter | 82 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Material | Plastic |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
| Inner diameter | 17 mm |
| Mounting points diameter | 17 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Suspension Spring |
| Wire Diameter | 11.8 mm |
| Placement on Vehicle | Front Axle |
| Length | 354 mm |
| Type | Suspension Spring |
| Outer diameter | 134 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket, cylinder head cover |
| Length | 763 mm |
| Width | 202 mm |
| Material | ACM (Polyacrylate) |
| Thickness | 11 mm |
| Mounting points diameter | 8 mm |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 450 mm |
| Additional Information | with gasket/seal |
| Outer diameter | 182 mm |
| Inner diameter | 155 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Joint Type | CV Joint |
| Type | Bellow Kit, drive shaft |
| Inner diameter 1 | 34 mm |
| Material | Thermoplastic polyester elastomer |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 72 mm |
| Length | 110 mm |
| Placement on Vehicle | transmission sided |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (178711)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Material | Thermoplastic polyester elastomer |
| Inner diameter 1 | 28 mm |
| Inner diameter 2 | 90 mm |
| Joint Type | Tripod Joint |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Placement on Vehicle | Wheel Side, Front Axle Right, Front Axle Left |
| Length | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (184408)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 44 |
| Timing Chain Size | G53HR |
| Type | Timing Chain |
| Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 186523 |
| Number of Connectors / Ports | 2 |
| Cable Length | 735 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 16 mm |
| Function | Hydraulic Hose, steering |
| Material | NBR (nitrile butadiene rubber) |
| Type | Hydraulic Hose, steering |
| Outer diameter | 24 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Sensor, crankshaft pulse |
| Function | Sensor, crankshaft pulse |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower, Centre |
| Length | 157 mm |
| Width | 70 mm |
| Thickness | 48 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Joint, steering column |
| Type | Joint, steering column |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 23 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 30 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































