Important compatibility info
| Width of castor bearing surface | 26 mm |
| Outer diameter | 82 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Material | Plastic |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
| Inner diameter | 17 mm |
| Mounting points diameter | 17 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Suspension Spring |
| Wire Diameter | 11.8 mm |
| Placement on Vehicle | Front Axle |
| Length | 354 mm |
| Type | Suspension Spring |
| Outer diameter | 134 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 450 mm |
| Additional Information | with gasket/seal |
| Outer diameter | 182 mm |
| Inner diameter | 155 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Placement on Vehicle | Right |
| for OE number | 1806.34 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | FKM (fluorocarbon rubber) |
| Outer diameter | 22.6 mm |
| Valve stem diameter | 5 mm |
| Type | Seal Set, valve stem |
| Function | Seal Set, valve stem |
| Height | 18 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter 2 | 21 mm |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
| Inner diameter 1 | 25.4 mm |
| Width | 60 mm |
| Height | 98 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Dust Cover Kit, shock absorber (48437)
Important compatibility info
| Material | Thermoplastic polyester elastomer |
| Inner diameter 1 | 28 mm |
| Inner diameter 2 | 90 mm |
| Joint Type | Tripod Joint |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
| Placement on Vehicle | Wheel Side, Front Axle Right, Front Axle Left |
| Length | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (184408)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 44 |
| Timing Chain Size | G53HR |
| Type | Timing Chain |
| Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 186523 |
| Number of Connectors / Ports | 2 |
| Cable Length | 735 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 23 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 30 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Length | 88 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Rod/Strut | Coupling Rod |
| Spanner Size | 17 |
| Material | Steel |
| Additional Information | with nuts |
| Colour | Black |
| External Thread Size | M10 x 1,25 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Metal |
| Outer diameter | 80 mm |
| Function | Deflection Pulley/Guide Pulley, timing belt |
| Type | Deflection Pulley/Guide Pulley, timing belt |
| Width of castor bearing surface | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | transmission sided |
| Width | 140 mm |
| Outer diameter | 172 mm |
| Inner diameter | 92 mm |
| Function | Shaft Seal, crankshaft |
| Seal Material | FPM (fluoride rubber) |
| Type | Shaft Seal, crankshaft |
| Additional Information 2 | with flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing length | 278 mm |
| Mounting points diameter | 18 mm |
| Placement on Vehicle | both sides |
| Length | 506 mm |
| Eject Force | 610 N |
| Stroke | 197 mm |
| Housing Diameter | 22 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Radiator Hose |
| Type | Radiator Hose |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Additional Information | with quick coupling |
| for OE number | 1 511 620 |
| Inner diameter | 57 mm |
| Colour | Black |
| Hose Length | 215 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 137.9 mm |
| Width | 61.3 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with anti-squeak plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 39300-03000 |
| Type | Sensor, intake manifold pressure |
| Number of Connectors / Ports | 4 |
| Function | Sensor, intake manifold pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 61.7 mm |
| Width | 56.5 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Thickness/Strength 1 | 15 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Placement on Vehicle | Rear Axle, Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 175 mm |
| Inner diameter | 135 mm |
| Function | Shaft Seal, wheel bearing |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, outer |
| Material | FPM (fluoride rubber), ACM (Polyacrylate) |
| Width | 18 mm |
| Type | Shaft Seal, wheel bearing |
| Additional Information 2 | with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 519 mm |
| Paired article numbers | 106271 |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Placement on Vehicle | Rear Axle Left |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















