Important compatibility info
| Material | Plastic |
| Outer diameter | 65 mm |
| Additional Information 2 | with screw |
| Width of castor bearing surface | 24 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 164.1 mm |
| Width | 57 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Ignition Coil |
| Type | Ignition Coil |
| for OE number | 27301-2B100 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Tie Rod |
| Paired article numbers | 177762 |
| Additional Information | with nuts |
| Placement on Vehicle | Front Axle Right |
| Steering | with tie rod end |
| Type | Tie Rod |
| External Thread Size | M12 x 1,25 |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (104617)
- 1x Febi Tie Rod End (48119)
Important compatibility info
| Inner Length | 625 mm |
| Function | Cable Pull, clutch control |
| Outer Length | 1000 mm |
| Type | Cable Pull, clutch control |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 139.7 mm |
| Width | 67.9 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16.8 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Dust Cover Kit, shock absorber (104281)
Important compatibility info
| Type | Mounting, differential |
| Inner diameter | 14.9 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Thickness | 66 mm |
| Outer diameter | 75.5 mm |
| Material | Rubber/Metal |
| Function | Mounting, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Number of Connectors / Ports | 3 |
| Switch Point | 91 °C. 99 °C |
| Colour Coding | Black |
| Type | Temperature Switch, radiator fan |
| Function | Temperature Switch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Hose Length | 530 mm |
| Additional Information | with quick coupling |
| Cooling Hose | from expansion tank to engine cooler |
| Function | Radiator Hose |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Resistor, interior blower |
| Number of Connectors / Ports | 5 |
| Colour | Black, Green |
| Material | Plastic |
| Extra Description | febi Plus |
| Type | Resistor, interior blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 90 mm |
| Width | 45 mm |
| Thickness | 22 mm |
| Number of Connectors / Ports | 3 |
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Colour | Green |
| Number of Connectors / Ports | 2 |
| Function | Sensor, coolant temperature |
| Type | Sensor, coolant temperature |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Suspension Spring |
| Length | 380 mm |
| Outer diameter | 110 mm |
| Placement on Vehicle | Rear Axle |
| Number of Coils | 8.2 |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Thread Size | M14 x 1,5 |
| Paired article numbers | 177761 |
| Placement on Vehicle | Front Axle Left |
| External Thread Size | M12 x 1,25 |
| Type | Tie Rod |
| Function | Tie Rod |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (104617)
- 1x Febi Tie Rod End (48118)
Important compatibility info
| Length | 76 mm |
| Width | 31 mm |
| Thickness | 18 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with staples |
| Placement on Vehicle | Front Axle |
| Length | 155.6 mm |
| Width | 50.6 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.9 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with clamps, with steering bellow |
| Additional Information | with grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (29625)
- 1x Febi Tie Rod End (09317)
- 1x Febi Bellow, steering (29206)
- 1x Febi Clamping Clip (38764)
- 1x Febi Clamping Clip (38756)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Opening Temperature | 91 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 166.7 mm |
| Width | 59.3 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.5 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Replaces | 116328 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Right, Centre |
| Additional Information | with rubber mounts |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 197241 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Wings | 11 |
| Function | Fan Wheel, engine cooling |
| Outer diameter | 353 mm |
| Type | Fan Wheel, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Metal |
| Function | Steering Lock |
| Type | Steering Lock |
| for OE number | 155 905 851 |
| Lock System | without lock barrel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Sensor Type | Differential Pressure Sensor |
| Material | Plastic |
| Number of Connectors / Ports | 3 |
| Function | Sensor, exhaust pressure |
| Type | Sensor, exhaust pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 2176 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Type | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 22 |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 27 |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Upper, Rear |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 31331 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 111 mm |
| Material | Rubber |
| Inner diameter 1 | 31 mm |
| Inner diameter 2 | 100 mm |
| Joint Type | CV Joint |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (186186)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Material | Metal |
| Outer diameter | 57 mm |
| Inner diameter | 8.2 mm |
| Type | Deflection Pulley/Guide Pulley, timing belt |
| Function | Deflection Pulley/Guide Pulley, timing belt |
| Width of castor bearing surface | 31 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Upper |
| Inner diameter | 40 mm. 8 mm |
| Function | Radiator Hose |
| Cooling Hose | from engine to engine cooler |
| Type | Radiator Hose |
| Hose Length | 470 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with brake caliper screws, with anti-squeak plate, with fastening material |
| Placement on Vehicle | Rear Axle |
| Length | 115.6 mm |
| Width | 49.5 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.2 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inspection Tag | ECE R90 Approved |
| Wear Warning Contact | incl. wear warning contact |
| Type | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 16 mm |
| Width | 56.3 mm |
| Length | 105.2 mm |
| Placement on Vehicle | Rear Axle |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter | 69 mm |
| Wall Thickness | 4 mm |
| Additional Information 2 | with clamps |
| Hose Length | 140 mm |
| Material | NBR (nitrile butadiene rubber) |
| Type | Intake Hose, air filter |
| Function | Intake Hose, air filter |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Intake Hose, air filter (172076)
- 2x Febi Hose Clamp (48354)
Important compatibility info
| Type | Splash Guard, brake disc |
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 175136 |
| Function | Splash Guard, brake disc |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with lock nut |
| Spanner Size | 24 |
| Paired article numbers | 185155 |
| Type | Tie Rod End |
| Function | Tie Rod End |
| External Thread Size | M14 x 1,5 |
| Internal Thread Size | M16 x 1,5 |
| Additional Information 2 | with screw |
| Length | 138 mm |
| Placement on Vehicle | Front Axle Left, outer |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right Front, Left Front |
| Paired article numbers | 07649 |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Replaces | 06790; 07649 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 194.3 mm |
| Width | 73.6 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 20.3 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Metal |
| Outer diameter | 110 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 28 mm |
| Inner diameter | 15 mm |
| Mounting points diameter | 15 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 139.2 mm |
| Width | 55.5 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.5 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | ACM (Polyacrylate), Rubber/Metal |
| Function | Gasket, automatic transmission oil sump |
| Type | Gasket, automatic transmission oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Ignition Coil |
| Housing Colour | black |
| Vehicle Equipment | for vehicles with ignition distributor |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Suspension Spring |
| Placement on Vehicle | Rear Axle |
| Length | 400 mm |
| Outer diameter | 126 mm |
| Type | Suspension Spring |
| Wire Diameter | 10.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness/Strength 1 | 16.3 mm |
| Function | Brake Pad Set, disc brake |
| Placement on Vehicle | Front Axle |
| Length | 155.1 mm |
| Width | 70.4 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Tie Rod End |
| Length | 220 mm |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Internal Thread Size | M16 x 1,5 |
| External Thread Size | M14 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 320 mm |
| Additional Information | with nuts |
| External Thread Size | M12 x 1,5 |
| Function | Tie Rod |
| Paired article numbers | 49082 |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with clamps, with steering bellow |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod (36508)
- 1x Febi Clamping Clip (23842)
- 1x Febi Bellow, steering (38621)
- 1x Febi Clamping Clip (38762)
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 314 mm |
| Paired article numbers | 49081 |
| Function | Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M14 x 1,5 |
| Type | Tie Rod |
| Additional Information 2 | with clamps, with steering bellow |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod (36509)
- 1x Febi Bellow, steering (38621)
- 1x Febi Clamping Clip (23842)
- 1x Febi Clamping Clip (38762)
Important compatibility info
| Additional Information | with gasket/seal |
| Outer diameter | 73 mm |
| Opening Temperature | 85 °C |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Adjustable | Adjustable |
| External Thread Size | M12 x 1,5 |
| Type | Tie Rod |
| Function | Tie Rod |
| Colour | Green |
| Driver Position | for right-hand drive vehicles |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 164.8 mm |
| Width | 73 mm |
| Thickness/Strength 1 | 20 mm |
| Function | Brake Pad Set, disc brake |
| Inspection Tag | ECE R90 Approved |
| Type | Brake Pad Set, disc brake |
| Wear Warning Contact | prepared for wear warning indicator |
| Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































