Important compatibility info
Weight | 1.238 kg |
Placement on Vehicle | Front Axle Right |
Length | 448 mm |
Paired article numbers | 49044 |
Function | Tie Rod |
External Thread Size | M12 x 1,5 |
Extra Description | ProKit |
Type | Tie Rod |
Additional Information 2 | with clamps, with steering bellow |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (37594)
- 1x Febi Inner Tie Rod (26045)
- 1x Febi Bellow, steering (31054)
- 1x Febi Clamping Clip (38762)
- 1x Febi Clamping Clip (38756)
Important compatibility info
Weight | 0.620 kg |
Type | Splash Guard, brake disc |
Extra Description | febi Plus |
Function | Splash Guard, brake disc |
Paired article numbers | 174964 |
Placement on Vehicle | Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.60 kg |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 36882 |
Material | Sheet Steel |
Placement on Vehicle | Front Axle Left, Lower |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Mechanical |
Length | 57 mm |
Material | Plastic, Metal |
Outer diameter | 19 mm |
Weight | 0.05 kg |
Function | Tensioner, timing chain |
Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Thermostat Housing |
Function | Thermostat Housing |
Additional Information | with gasket/seal |
Weight | 0.121 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.37 kg |
Placement on Vehicle | Lower, Centre |
Length | 157 mm |
Width | 70 mm |
Thickness | 48 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right |
Paired article numbers | 107050 |
Cable Length | 140 mm |
Number of circuits | 6 |
Type | Cable Repair Set, tail light assembly |
Function | Cable Repair Set, tail light assembly |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Wire Diameter | 12.5 mm |
Outer diameter | 117 mm. 80 mm |
Length | 368 mm |
Weight | 2.26 kg |
Placement on Vehicle | Rear Axle |
Function | Suspension Spring |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter 2 | 21 mm |
Weight | 0.420 kg |
Type | Dust Cover Kit, shock absorber |
Function | Dust Cover Kit, shock absorber |
Inner diameter 1 | 25.4 mm |
Width | 60 mm |
Height | 98 mm |
Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Dust Cover Kit, shock absorber (48437)
Important compatibility info
Placement on Vehicle | Rear Axle |
Height | 100 mm |
Width | 60 mm |
Inner diameter 1 | 25.4 mm |
Inner diameter 2 | 11.1 mm |
Weight | 0.440 kg |
Type | Dust Cover Kit, shock absorber |
Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Paired article numbers | 107051 |
Cable Length | 140 mm |
Number of circuits | 6 |
Type | Cable Repair Set, tail light assembly |
Function | Cable Repair Set, tail light assembly |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear |
for OE number | 2 210 412 |
Weight | 0.565 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Placement on Vehicle | Rear Axle Right |
Weight | 0.040 kg |
Cable Length | 610 mm |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Paired article numbers | 107902 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.07 kg |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear, both sides |
Cable Length | 200 mm |
Number of circuits | 3 |
Function | Cable Repair Set, door |
Extra Description | febi Plus |
Type | Cable Repair Set, door |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.63 kg |
Placement on Vehicle | Rear |
Material | Rubber/Metal |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
for OE number | 3C0 199 855 K |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with rubber-metal mounts |
Weight | 1.470 kg |
Placement on Vehicle | Rear Axle Left, Upper |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 173740 |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with rubber-metal mounts |
Weight | 1.470 kg |
Placement on Vehicle | Rear Axle Right, Upper |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 173741 |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 22 |
Number of Connectors / Ports | 3 |
Switch Point | 91 °C. 99 °C |
Colour Coding | White |
Weight | 0.046 kg |
External Thread Size | M14 x 1,5 |
Function | Temperature Switch, radiator fan |
Type | Temperature Switch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 131.5 mm |
Width | 69.5 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 19.6 mm |
Function | Brake Pad Set, disc brake |
Wear Warning Contact | prepared for wear warning indicator |
Weight | 1.810 kg |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Outer diameter | 87 mm. 112 mm |
Weight | 0.856 kg |
Inner diameter | 14 mm |
Placement on Vehicle | Front Axle |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Height | 69 mm |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 146 mm |
Width | 67.7 mm. 57.7 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Thickness/Strength 1 | 17.1 mm |
Weight | 2.083 kg |
Inspection Tag | ECE R90 Approved |
Wear Warning Contact | prepared for wear warning indicator |
Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.73 kg |
Placement on Vehicle | Front |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
for OE number | 06 84 697 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.103 kg |
Material | Plastic |
Length | 252 mm |
Engine Management | Timing Chain |
Function | Guide, timing chain |
Type | Guide, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.160 kg |
Material | Aluminium |
Type | Screw Set, cylinder head cover |
Function | Screw Set, cylinder head cover |
Extra Description | febi Plus |
Additional Information
Technical Information
This article is designed to be disposable, and must be replaced each time they are used.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 19x Febi Bolt, cylinder head cover (49849)
- 3x Febi Bolt, cylinder head cover (49850)
Important compatibility info
Additional Information 2 | without lid |
Weight | 0.574 kg |
Material | PP (Polypropylene) |
Function | Expansion Tank, coolant |
Type | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.165 kg |
Type | Switch, engine brake |
Number of Connectors / Ports | 3 |
Function | Switch, engine brake |
Operating Mode | Manual (foot operated) |
Spanner Size | 27 |
Hole Spacing | 67 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.238 kg |
Placement on Vehicle | both sides |
Length | 397 mm |
Housing Diameter | 19 mm |
Eject Force | 440 N |
Stroke | 150 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, bonnet |
Housing length | 219 mm |
Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 172 mm |
Material | Rubber/Metal |
Inner diameter | 12 mm |
Function | Suspension Strut Support Mount |
Weight | 0.789 kg |
Type | Suspension Strut Support Mount |
Height | 43 mm |
Width | 172 mm |
Outer diameter | 92 mm. 133 mm |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.974 kg |
Placement on Vehicle | Front Axle |
Material | Rubber/Metal |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left |
Paired article numbers | 174929 |
Weight | 0.374 kg |
Type | Splash Guard, brake disc |
Function | Splash Guard, brake disc |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Weight | 1.478 kg |
Material | Sheet Steel |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 55 mm |
Inner diameter | 17 mm |
Number of Ribs | 6 |
Weight | 0.398 kg |
Function | Alternator Freewheel Clutch |
Additional Information 2 | with lid |
Type | Alternator Freewheel Clutch |
for OE number | 611 155 07 15 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Function | Cap, fuel tank |
Type | Cap, fuel tank |
Inner diameter | 31 mm |
Lockable | not lockable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Width | 57.5 mm |
Wear Warning Contact | incl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Function | Brake Pad Set, disc brake |
Length | 150.8 mm |
Thickness/Strength 1 | 18.3 mm |
Type | Brake Pad Set, disc brake |
Weight | 2.0 kg |
Additional Information 2 | with bolts/screws |
Replaces | 116013 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Additional Information 2 | without ball bearing |
Weight | 0.820 kg |
Placement on Vehicle | Front Axle Right, Front Axle Left |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Filter type | Filter Insert |
Weight | 0.110 kg |
Type | Filter, operating hydraulics |
Function | Filter, operating hydraulics |
Height | 68.5 mm |
Outer diameter | 55.5 mm |
Inner diameter | 26.3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.062 kg |
Placement on Vehicle | Front Axle |
Length | 155.3 mm. 156.4 mm |
Width | 72 mm. 71 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 19.4 mm. 18.7 mm |
Function | Brake Pad Set, disc brake |
Additional Information 2 | with piston clip |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.7 kg |
Placement on Vehicle | Front Axle |
Length | 146.4 mm |
Width | 59.2 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17.4 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Opening Temperature | 88 °C |
Function | Thermostat, coolant |
Weight | 0.183 kg |
Additional Information | with gasket/seal |
Type | Thermostat, coolant |
Replaced by | 21551 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.524 kg |
Placement on Vehicle | Rear Axle, Rear |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information 2 | without ball bearing |
Type | Suspension Strut Support Mount |
Function | Suspension Strut Support Mount |
Weight | 0.922 kg |
Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness | 85 mm |
Inner diameter | 13 mm |
Function | Mounting, control/trailing arm |
Length | 85 mm |
Width | 69 mm |
Material | Rubber/Metal |
Outer diameter | 61 mm |
Placement on Vehicle | Outer, Rear Axle Left, Rear Axle Right |
Weight | 0.38 kg |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.080 kg |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Material | Cast Steel |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Metal |
Width | 31 mm |
Width of castor bearing surface | 31 mm |
Outer diameter | 65 mm |
Weight | 0.214 kg |
Mounting points diameter | 17 mm |
Type | Tensioner Pulley, v-ribbed belt |
Function | Tensioner Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Pressure Control Valve |
Length | 54 mm |
Spanner Size | 22 |
Opening Pressure | 15 bar |
Weight | 0.092 kg |
External Thread Size | M16 x 1,5 |
Type | Pressure Control Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 3 |
Weight | 0.09 kg |
Type | Sensor, exhaust pressure |
Function | Sensor, exhaust pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 60.8 mm |
Function | Brake Pad Set, disc brake |
Thickness/Strength 1 | 16.5 mm |
Type | Brake Pad Set, disc brake |
Weight | 1.92 kg |
Wear Warning Contact | with acoustic wear warning |
Length | 149 mm |
Placement on Vehicle | Front Axle |
Inspection Tag | ECE R90 Approved |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 88 mm |
Width | 58 mm |
Material | PU (Polyurethane) |
Function | Rubber Buffer, suspension |
Weight | 0.09 kg |
Inner diameter | 19 mm |
Placement on Vehicle | Rear Axle |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Pump Type | Mono Pump |
Function | Washer Fluid Pump, window cleaning |
Voltage | 24 V |
Operating Mode | Electric |
Weight | 0.126 kg |
Number of Connectors / Ports | 2 |
Type | Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023