Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.124 kg |
| Bore Diameter | 19 mm |
| Fill Medium | Brake Fluid |
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.51
Important compatibility info
| Type | Mounting, differential |
| Weight | 0.290 kg |
| Inner diameter | 14.9 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Thickness | 66 mm |
| Outer diameter | 75.5 mm |
| Material | Rubber/Metal |
| Function | Mounting, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.51
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 164.9 mm |
| Width | 62 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 20.8 mm |
| Function | Brake Pad Set, disc brake |
| Weight | 2.272 kg |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.51
Important compatibility info
| Width | 45 mm |
| Outer diameter | 79 mm |
| Additional Information 2 | with retaining ring |
| Inner diameter | 43 mm |
| Weight | 1.080 kg |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Replaces | 173666 |
| Additional Information | with Split Pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.52
Important compatibility info
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| Weight | 1.700 kg |
| Internal Teeth, wheel side | 25 |
| Thread Size | M24x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.52
Important compatibility info
| Weight | 0.101 kg |
| Number of Connectors / Ports | 2 |
| Function | Sensor, speed |
| Screw length below head | 55 mm |
| External Thread Size | M18 |
| Type | Sensor, speed |
| for OE number | 012 542 56 17 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.52
Important compatibility info
| Version | OE Standard |
| Weight | 0.260 kg |
| Type | Towbar Socket |
| DIN / ISO | 12098 |
| Number of Connectors / Ports | 15 |
| Inspection Tag | ADR |
| Voltage | 24 V |
| Additional Information 2 | with screw connection |
| Function | Towbar Socket |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.52
Important compatibility info
| Number of Connectors / Ports | 3 |
| Type | Knock Sensor |
| Function | Knock Sensor |
| Length | 340 mm |
| Colour | Brown |
| Weight | 0.69 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.52
Important compatibility info
| Weight | 0.066 kg |
| Placement on Vehicle | Front Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 864 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Paired article numbers | 174560 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.52
Important compatibility info
| Number of Connectors / Ports | 2 |
| Cable Length | 1070 mm |
| Function | Sensor, wheel speed |
| Weight | 0.130 kg |
| Placement on Vehicle | Front Axle Right |
| Type | Sensor, wheel speed |
| Paired article numbers | 175244 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.52
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle Right, Front Axle Left |
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
| ABS Ring Diameter | 81 mm |
| Number of Teeth, ABS ring | 45 |
| Weight | 2.426 kg |
| Internal Teeth, wheel side | 27 |
| External Teeth, Wheel Side | 33 |
| Thread Size | M14x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.52
Important compatibility info
| Type | Washer Fluid Pump, headlight cleaning |
| Function | Washer Fluid Pump, headlight cleaning |
| Pump Type | Mono Pump |
| Weight | 0.17 kg |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.52
Important compatibility info
| External Thread Size | M10 x 1,25 |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Function | Suspension Strut Support Mount |
| Weight | 0.844 kg |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
| Inner diameter | 13 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.52
Important compatibility info
| Weight | 0.367 kg |
| Placement on Vehicle | both sides |
| Length | 600 mm |
| Housing Diameter | 19 mm |
| Eject Force | 670 N |
| Stroke | 213 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 357 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.52
Important compatibility info
| Material | PE (Polyethylene) |
| Inner diameter | 56 mm |
| Weight | 0.326 kg |
| Type | Charge Air Hose |
| Function | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.52
Important compatibility info
| Weight | 0.33 kg |
| Inner diameter | 25 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (08121)
£27.52
Important compatibility info
| Weight | 0.37 kg |
| Outer diameter | 65 mm |
| Placement on Vehicle | Charge Air Cooler, Right |
| Inner diameter | 53 mm |
| Function | Charge Air Hose |
| Turbocharger line | Turbocharger to charge air cooler |
| Type | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.53
Important compatibility info
| Thread Type | with right-hand thread |
| Cone Size | 26 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 180 mm |
| Weight | 1.6 kg |
| Function | Tie Rod End |
| Internal Thread Size | M30 x 1,5 |
| External Thread Size | M20 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with crown nut and split pin, with threaded sleeve, with sleeve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bolt, wheel alignment (43446)
- 1x Febi Tie Rod End (39389)
£27.53
Important compatibility info
| Weight | 0.772 kg |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.53
Important compatibility info
| Paired article numbers | 12026 |
| Weight | 0.83 kg |
| Material | Rubber/Metal |
| Function | Repair Kit, suspension strut support mount |
| Replaces | 38001 |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (12028)
- 1x Febi Rolling Bearing, suspension strut support mount (12030)
£27.54
Important compatibility info
| Weight | 0.934 kg |
| Material | Cast Aluminium |
| Number of Teeth | 18 |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.54
Important compatibility info
| Paired article numbers | 12027 |
| Weight | 0.831 kg |
| Material | Rubber/Metal |
| Replaces | 37921 |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (12029)
- 1x Febi Rolling Bearing, suspension strut support mount (12030)
£27.54
Important compatibility info
| Length | 142 mm |
| Width | 59 mm |
| Wear Warning Contact | excl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.3 mm |
| Function | Brake Pad Set, disc brake |
| Model | QASHQAI X-TRAIL |
| Placement on Vehicle | Front Axle |
| Type | Brake Pad Set, disc brake |
| Weight | 1.63 kg |
| Manufacturer | NISSAN |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.54
Important compatibility info
| Weight | 3.262 kg |
| Placement on Vehicle | Rear Axle Left |
| Length | 185 mm |
| Operating Mode | Manual |
| Paired article numbers | 03587 |
| Function | Adjuster, braking system |
| Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.55
Important compatibility info
| Function | Sensor, wheel speed |
| Cable Length | 970 mm |
| Placement on Vehicle | Front Axle Left |
| Number of Connectors / Ports | 2 |
| Weight | 0.161 kg |
| Type | Sensor, wheel speed |
| Paired article numbers | 174828 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.55
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 155.2 mm |
| Width | 64 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16.3 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Weight | 1.801 kg |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.55
Important compatibility info
| Function | Thermostat, coolant |
| Opening Temperature | 71 °C |
| Weight | 0.177 kg |
| Type | Thermostat, coolant |
| Additional Information 2 | with seal ring |
| for OE number | 8149182 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat, coolant (18959)
- 1x Febi Seal, thermostat (11834)
£27.56
Important compatibility info
| Function | Tie Rod |
| Type | Tie Rod |
| Steering | with tie rod end |
| Weight | 1.206 kg |
| Paired article numbers | 176733 |
| Additional Information | with fastening/mounting material |
| Placement on Vehicle | Front Axle Left |
| Length | 445 mm |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (109581)
- 1x Febi Inner Tie Rod (100791)
£27.56
Important compatibility info
| Function | Sensor Ring, ABS |
| Type | Sensor Ring, ABS |
| Number of Teeth, ABS ring | 100 |
| Weight | 0.226 kg |
| Inner diameter | 132 mm |
| Outer diameter | 144 mm |
| Material | Steel |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.56
Important compatibility info
| Type | Spring, driver cab suspension |
| Function | Spring, driver cab suspension |
| Weight | 2.0 kg |
| Placement on Vehicle | Front, Rear |
| Thickness | 266 mm |
| Outer diameter | 89 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.56
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023