Important compatibility info
Weight | 0.839 kg |
Additional Information 2 | with seal ring |
Material | Cast Aluminium |
Number of Teeth | 23 |
Number of Wings | 8 |
Water pump impeller material | Metal |
Function | Water Pump, engine cooling |
Seal Material | Rubber |
Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1,25 |
Weight | 0.3 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 252 mm |
Material | Steel |
Spanner Size | 17 |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.47 kg |
Extra Description | ProKit |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Function | Ball Joint |
External Thread Size | M12 x 1,25 |
Type | Ball Joint |
Additional Information 2 | with retaining ring |
Steering arm type | for control arm |
Additional Information | with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Suspension Spring |
Type | Suspension Spring |
Weight | 1.82 kg |
Outer diameter | 111 mm |
Length | 351 mm |
Placement on Vehicle | Rear Axle |
Wire Diameter | 11.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle, Wheel Side |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Inner diameter 1 | 27 mm |
Inner diameter 2 | 87 mm |
Weight | 0.085 kg |
Joint Type | CV Joint |
Length | 126 mm |
Material | Thermoplastic polyester elastomer |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (184713)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Wire Diameter | 12.5 mm |
Weight | 1.94 kg |
Placement on Vehicle | Front Axle |
Length | 328 mm |
Outer diameter | 169 mm |
Type | Suspension Spring |
Function | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle, Rear Axle |
Function | Brake Shoe Pin Set |
Weight | 1.3 kg |
Type | Brake Shoe Pin Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Brake Shoe Bolt (03963)
- 2x Febi Bush, brake shoe pin (05342)
- 4x Febi Seal Ring (05334)
- 4x Febi Cover Ring, brake-shoe pin bore (06458)
- 1x Febi Retaining Plate, brake shoe pins (06955)
- 1x Febi Retaining Plate, brake shoe pins (06456)
- 1x Febi Screw (06262)
- 1x Febi Retaining Plate, brake shoe pins (06457)
Important compatibility info
Inner Brake Drum Diameter | 180 mm |
Rim Hole Number | 4 -Hole |
Placement on Vehicle | Rear Axle |
Width | 30 mm |
Outer diameter | 211.5 mm |
Thickness | 74.5 mm |
Bolt Hole Circle Diameter | 100 mm |
Function | Brake Drum |
Type | Brake Drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle, Outer |
Width | 35 mm |
Outer diameter | 72 mm |
Inner diameter | 28 mm |
Bearing Type | Tapered Roller Bearing |
Function | Bearing / Wheel Bearing |
Type | Bearing / Wheel Bearing |
Weight | 0.58 kg |
Bearing Code | 33207 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.265 kg |
Function | Sensor, wheel speed |
Placement on Vehicle | Front Axle Left, Rear Axle Left, Front Axle Right, Rear Axle Right |
Length | 4400 mm |
Number of Connectors / Ports | 2 |
Resistance | 1200 Ohm |
Cable Length | 4280 mm |
Type | Sensor, wheel speed |
Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Thermostat, coolant |
Opening Temperature | 71 °C |
Weight | 0.177 kg |
Type | Thermostat, coolant |
Additional Information 2 | with seal ring |
for OE number | 8149182 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat, coolant (18959)
- 1x Febi Seal, thermostat (11834)
Important compatibility info
Weight | 1.87 kg |
Placement on Vehicle | Front Axle |
Length | 320 mm |
Outer diameter | 139 mm |
Function | Suspension Spring |
Number of Coils | 5.3 |
Wire Diameter | 12.5 mm |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.545 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Steering arm type | Control Arm |
Rod/Strut | Guide Rod |
Function | Control/Trailing Arm, wheel suspension |
for OE number | 220 350 24 06 |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.74 kg |
Placement on Vehicle | Rear |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
for OE number | 77 00 817 782 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with piston clip |
Weight | 2.4 kg |
Placement on Vehicle | Front Axle |
Width | 73.5 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 18.2 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Length | 155.4 mm. 156.6 mm |
Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 164 mm |
Height | 151 mm |
Weight | 0.352 kg |
Function | Fuel filter |
Filter type | In-Line Filter |
Pipe Diameter | 10 mm. 8 mm |
Width | 134 mm |
Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with crown nut |
Cone Size | 19.5 mm |
Weight | 1.25 kg |
Steering arm type | for control arm |
Mounting points diameter | 12 mm |
Type | Ball Joint |
Function | Ball Joint |
External Thread Size | M16 x 1,5 |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.192 kg |
Type | Splash Guard, brake disc |
Paired article numbers | 175137 |
Placement on Vehicle | Rear Axle Left |
Function | Splash Guard, brake disc |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.074 kg |
Placement on Vehicle | Front Axle Right |
Paired article numbers | 106319 |
Number of Connectors / Ports | 2 |
Cable Length | 855 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Ribs | 7 |
Weight | 0.196 kg |
Type | Deflection/Guide Pulley, v-ribbed belt |
Track rollers material | Plastic |
Function | Deflection/Guide Pulley, v-ribbed belt |
Outer diameter | 75 mm |
Width of castor bearing surface | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023