Important compatibility info
Weight | 0.772 kg |
Material | Rubber/Metal |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thread Type | with right-hand thread |
Cone Size | 26 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 180 mm |
Weight | 1.6 kg |
Function | Tie Rod End |
Internal Thread Size | M30 x 1,5 |
External Thread Size | M20 x 1,5 |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information | with crown nut and split pin, with threaded sleeve, with sleeve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bolt, wheel alignment (43446)
- 1x Febi Tie Rod End (39389)
Important compatibility info
Paired article numbers | 12026 |
Weight | 0.83 kg |
Material | Rubber/Metal |
Function | Repair Kit, suspension strut support mount |
Replaces | 38001 |
Type | Repair Kit, suspension strut support mount |
Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (12028)
- 1x Febi Rolling Bearing, suspension strut support mount (12030)
Important compatibility info
Length | 142 mm |
Width | 59 mm |
Wear Warning Contact | excl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17.3 mm |
Function | Brake Pad Set, disc brake |
Model | QASHQAI X-TRAIL |
Placement on Vehicle | Front Axle |
Type | Brake Pad Set, disc brake |
Weight | 1.63 kg |
Manufacturer | NISSAN |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 12027 |
Weight | 0.831 kg |
Material | Rubber/Metal |
Replaces | 37921 |
Function | Repair Kit, suspension strut support mount |
Type | Repair Kit, suspension strut support mount |
Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (12029)
- 1x Febi Rolling Bearing, suspension strut support mount (12030)
Important compatibility info
Material | ACM (Polyacrylate) |
Function | Gasket Set, cylinder head cover |
Weight | 0.161 kg |
Type | Gasket Set, cylinder head cover |
for OE number | 11213-0T021 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gasket, cylinder head cover (102653)
- 4x Febi Seal Ring, spark plug shaft (106903)
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 155.2 mm |
Width | 64 mm |
Wear Warning Contact | incl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 16.3 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Weight | 1.801 kg |
Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.77 kg |
Placement on Vehicle | Front Axle |
Length | 360 mm |
Outer diameter | 133 mm |
Function | Suspension Spring |
Wire Diameter | 11.5 mm |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Wire Diameter | 11.5 mm |
Number of Coils | 5.2 |
Weight | 1.8 kg |
Outer diameter | 143 mm |
Length | 334 mm |
Placement on Vehicle | Front Axle |
Type | Suspension Spring |
Function | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Joint Kit, drive shaft |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Thread Size | M16x1,5 |
External Teeth, Wheel Side | 42 |
Internal Teeth, wheel side | 33 |
Weight | 2.122 kg |
Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Wire Diameter | 12.5 mm |
Weight | 1.94 kg |
Placement on Vehicle | Front Axle |
Length | 328 mm |
Outer diameter | 169 mm |
Type | Suspension Spring |
Function | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Filter type | In-Line Filter |
Function | Filter, venting (fuel tank) |
Weight | 0.045 kg |
Length | 156 mm |
Outer diameter | 47.5 mm |
Pipe Diameter | 6 mm |
Type | Filter, venting (fuel tank) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.9 kg |
Placement on Vehicle | Rear Axle |
Length | 389 mm |
Outer diameter | 111 mm |
Number of Coils | 7.7 |
Function | Suspension Spring |
Type | Suspension Spring |
Wire Diameter | 11.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Colour | Black |
Number of Connectors / Ports | 2 |
Weight | 0.02 kg |
Type | Sensor, coolant temperature |
Function | Sensor, coolant temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 3648 mm |
Paired article numbers | 104544 |
Weight | 0.148 kg |
Placement on Vehicle | Rear Axle Right |
Number of Connectors / Ports | 2 |
Resistance | 1150 Ohm |
Cable Length | 3588 mm |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.265 kg |
Function | Sensor, wheel speed |
Placement on Vehicle | Front Axle Left, Rear Axle Left, Front Axle Right, Rear Axle Right |
Length | 4400 mm |
Number of Connectors / Ports | 2 |
Resistance | 1200 Ohm |
Cable Length | 4280 mm |
Type | Sensor, wheel speed |
Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.839 kg |
Additional Information 2 | with seal ring |
Material | Cast Aluminium |
Number of Teeth | 23 |
Number of Wings | 8 |
Water pump impeller material | Metal |
Function | Water Pump, engine cooling |
Seal Material | Rubber |
Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M22 x 1,5 |
Weight | 1.67 kg |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Length | 147 mm |
Outer diameter | 80 mm |
External Teeth, Wheel Side | 22 |
Seal Diameter | 69 mm |
Internal Teeth, wheel side | 22 |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle, Outer |
Width | 35 mm |
Outer diameter | 72 mm |
Inner diameter | 28 mm |
Bearing Type | Tapered Roller Bearing |
Function | Bearing / Wheel Bearing |
Type | Bearing / Wheel Bearing |
Weight | 0.58 kg |
Bearing Code | 33207 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Weight | 0.071 kg |
Type | Oil Line, charger |
Forward- /Backflow | Supply Line |
Function | Oil Line, charger |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023