Important compatibility info
Placement on Vehicle | Left Rear |
Length | 2264 mm |
Function | Cable Pull, parking brake |
Weight | 0.810 kg |
Type | Cable Pull, parking brake |
Paired article numbers | 173382 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Water Pump, engine cooling |
Additional Information 2 | switchable water pump |
Type | Water Pump, engine cooling |
Number of Wings | 9 |
Water pump impeller material | Metal |
Seal Material | Rubber/Metal |
Additional Information | with gasket/seal |
Weight | 1.52 kg |
Number of grooves | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gasket/seal |
for OE number | 13568-39016 S6 |
Type | Water Pump & Timing Belt Kit |
Function | Water Pump & Timing Belt Kit |
Water pump impeller material | Metal |
Number of Teeth | 97 |
Weight | 3.21 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (173549)
- 1x Febi Water Pump, engine cooling (24589)
Important compatibility info
Function | Brake Pad Set, disc brake |
Wear Warning Contact | with acoustic wear warning |
Width | 45.8 mm |
Length | 86.9 mm |
Placement on Vehicle | Rear Axle |
Type | Brake Pad Set, disc brake |
Thickness/Strength 1 | 14.7 mm |
Inspection Tag | ECE R90 Approved |
Weight | 0.710 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Splash Guard, brake disc |
Type | Splash Guard, brake disc |
Paired article numbers | 174246 |
Extra Description | febi Plus |
Placement on Vehicle | Rear Axle Left |
Weight | 0.23 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Weight | 0.071 kg |
Number of Connectors / Ports | 2 |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Paired article numbers | 109563 |
Cable Length | 960 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Function | Splash Guard, brake disc |
Type | Splash Guard, brake disc |
Weight | 0.396 kg |
Paired article numbers | 174902 |
Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.038 kg |
Material | Plastic |
Colour | Black |
Function | Hazard Warning Light Switch |
Extra Description | febi Plus |
Type | Hazard Warning Light Switch |
Switch Lighting | Yellow |
Number of Connectors / Ports | 6 |
Combi Switch Function | with hazard warning light function, Door Locking |
Placement on Vehicle | Centre Console |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Bush Set, axle beam |
Bearing/Mounting Type | Rubber-Metal Mount |
Inner diameter | 12 mm |
Thickness | 90 mm |
Outer diameter | 72 mm |
Material | Rubber/Metal |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Weight | 0.914 kg |
Additional Information | with nuts |
Type | Bush Set, axle beam |
Additional Information 2 | with bolts/screws |
Replaces | 14398 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bushing, axle beam (31547)
- 2x Febi Nut (14392)
- 2x Febi Bolt, axle beam mounting (26142)
- 1x Febi Mounting Paste (31941)
Important compatibility info
Material | Thermoplast |
Weight | 0.09 kg |
Placement on Vehicle | Front Axle, Rear Axle |
Thickness | 210 mm |
Function | Protective Cap/Bellow, shock absorber |
Type | Protective Cap/Bellow, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 8 -Hole |
Weight | 7.435 kg |
Rotor Style | Internally Vented |
Placement on Vehicle | Rear Axle |
Outer diameter | 345 mm |
Thickness | 76.5 mm |
Brake Disc Thickness | 18 mm |
Minimum thickness | 16.5 mm |
Bolt Hole Circle Diameter | 150 mm |
Centering Diameter | 112 mm |
Surface | Coated |
Number of mounting bores | 5 |
Type | Brake Disc Rotor |
Function | Brake Disc |
Inner diameter | 240 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.010 kg |
Length | 400 mm |
Height | 10 mm |
Width | 123 mm |
Filter type | Pre-filter |
Type | Filter, cabin air |
Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Mounting, engine |
Function | Mounting, engine |
Placement on Vehicle | Left |
Weight | 1.500 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 212 mm |
Additional Information 2 | with oil sump gasket |
Type | Hydraulic Filter Kit, automatic transmission |
Weight | 0.19 kg |
Height | 76 mm |
Width | 105 mm |
Filter type | Screen Filter |
Function | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Eject Force | 480 N |
Stroke | 210 mm |
Length | 555 mm |
Placement on Vehicle | Right Rear |
Weight | 0.46 kg |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Housing length | 18 mm |
Housing Diameter | 18 mm |
Paired article numbers | 179753 |
Mounting points diameter | 16.5 mm |
Piston conrod diameter | 8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 180 mm |
Paired article numbers | 15754 |
Thread Type | with right-hand thread |
Cone Size | 22 mm |
Pipe Diameter | 30 mm |
Function | Tie Rod End |
External Thread Size | M18 x 1,5, M28 x 1,5 |
Weight | 0.925 kg |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.2 kg |
Outer diameter | 110 mm |
Placement on Vehicle | both sides |
Bearing/Mounting Type | Rubber-Metal Mount |
Thickness | 68 mm |
Function | Mounting, engine |
Internal Thread Size | M10 x 1,5 |
Type | Mounting, engine |
Replaces | 28169; 28170 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left |
Paired article numbers | 171559 |
Type | Splash Guard, brake disc |
Function | Splash Guard, brake disc |
Extra Description | febi Plus |
Weight | 0.620 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.478 kg |
Operating Mode | Electric |
Number of Connectors / Ports | 3 |
Valve type | Solenoid Valve |
Type | Coolant Control Valve |
Function | Coolant Control Valve |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.24 kg |
Length | 580 mm |
Height | 37 mm |
Width | 165 mm |
Filter type | Pollen Filter |
Type | Filter, cabin air |
Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Function | Front Cover Lock |
Weight | 0.53 kg |
Type | Front Cover Lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 3 |
Type | Switch, splitter gearbox |
Weight | 1.09 kg |
Function | Switch, splitter gearbox |
External Thread Size | M10 x 1, M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Hydraulic Filter, automatic transmission |
Weight | 0.332 kg |
Type | Hydraulic Filter, automatic transmission |
Filter type | Screen Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.367 kg |
Function | Mounting, radiator |
Length | 87 mm |
Width | 40 mm |
External Thread Size | M12 x 1,75 |
Type | Mounting, radiator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Capacity | 15 l |
Type | Air Tank, compressed-air system |
Operating Pressure | 15 bar |
Internal Thread Size | M22 x 1,5 |
Function | Air Tank, compressed-air system |
Number of Connectors / Ports | 4 |
Weight | 6.6 kg |
Length | 513 mm |
Material | Steel |
Outer diameter | 206 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Joint Kit, drive shaft |
Thread Size | M22x1,5 |
Type | Joint Kit, drive shaft |
Weight | 2.014 kg |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
External Teeth, Wheel Side | 26 |
Internal Teeth, wheel side | 22 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 112 mm |
Outer diameter | 194 mm |
Inner diameter | 70 mm |
Number of Holes | 10 |
Bolt Hole Circle Diameter | 165 mm |
Bearing Type | Tapered Roller Bearing |
Function | Wheel Hub |
Weight | 11.3 kg |
Placement on Vehicle | Front Axle |
Type | Wheel Hub |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 8 mm |
Material | FPM (fluoride rubber) |
Placement on Vehicle | transmission sided |
Rotation Direction | Anticlockwise rotation |
Function | Shaft Seal, crankshaft |
Outer diameter | 108 mm |
Inner diameter | 76 mm |
Weight | 0.058 kg |
Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 170 mm |
Height | 80 mm |
Width | 180 mm |
Inspection Tag | ADR |
Number of Connectors / Ports | 14 |
Weight | 0.59 kg |
Protection Type (IP Code) | IP54 |
Type | Cable Junction Box |
Function | Cable Junction Box |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 6.64 kg |
Operating Mode | Electric |
Number of Connectors / Ports | 4 |
Rated Power | 850 W |
Number of Wings | 11 |
Type | Fan, engine cooling |
Function | Fan, engine cooling |
Extra Description | febi Plus |
Additional Information 2 | Brushless Motor, with radiator fan shroud |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Number of Connectors / Ports | 2 |
Rated Power | 300 W |
Weight | 2.14 kg |
Number of Wings | 7 |
Type | Fan, engine cooling |
Function | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.503 kg |
Core Depth | 12 mm |
Additional Information 2 | with dryer |
Refrigerant | R 134a |
Core Width | 645 mm |
Core Length | 336 mm |
Function | Condenser, air conditioning |
Type | Condenser, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, engine |
Placement on Vehicle | Lower, Rear |
Bearing/Mounting Type | Rubber-Metal Mount |
Weight | 1.250 kg |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Opening Temperature | 87 °C |
Weight | 0.45 kg |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Housing Type | with housing |
Additional Information 2 | with seal ring |
Additional Information | with coolant temperature sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.22 kg |
Placement on Vehicle | Rear Axle Right |
Length | 100 mm |
Material | Steel |
Paired article numbers | 28628 |
Rod/Strut | Coupling Rod |
External Thread Size | M10 x 1,25 |
Function | Link/Coupling Rod, stabiliser bar |
Pipe Diameter | 9 mm |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.076 kg |
External Thread Size | M16 x 1,5 |
Internal Thread Size | M16 x 1,5 |
Length | 47 mm |
Spanner Size | 22 |
Opening Pressure | 4.0 bar |
Function | Overflow Valve |
Type | Overflow Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 371 mm |
Material | Steel |
Outer diameter | 206 mm |
Number of Connectors / Ports | 4 |
Weight | 4.8 kg |
Capacity | 10 l |
Internal Thread Size | M22 x 1,5 |
Function | Air Tank, compressed-air system |
Type | Air Tank, compressed-air system |
Operating Pressure | 15.5 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.500 kg |
Placement on Vehicle | Front Axle Left, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 24084 |
Cone Size | 18 mm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.145 kg |
Placement on Vehicle | Front Axle |
Length | 137.8 mm |
Width | 51.2 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17.3 mm |
Function | Brake Pad Set, disc brake |
Wear Warning Contact | excl. wear warning contact |
Type | Brake Pad Set, disc brake |
Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Rear Axle Left |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 178081 |
Weight | 2.575 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 41 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Rear Axle Right |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 179172 |
Weight | 2.032 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 40 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.560 kg |
Length | 318 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Inner Tie Rod |
Extra Description | ProKit |
External Thread Size | M12 x 1,5 |
Internal Thread Size | M14 x 1,5 |
Type | Inner Tie Rod |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Nut (02685)
- 1x Febi Clamping Clip (38762)
- 1x Febi Molybdenum Grease (02582)
- 1x Febi Inner Tie Rod (28478)
Important compatibility info
Weight | 1.597 kg |
Material | Cast Aluminium |
Number of Wings | 6 |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Seal Material | Rubber |
Type | Water Pump, engine cooling |
for OE number | 026 121 010 D |
Hub external diameter | 40 mm |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.094 kg |
Steering arm type | Control Arm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Lower, Front |
Material | Steel |
External Thread Size | M12 x 1,25 |
Cone Size | 18 mm |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Length | 177 mm |
Width | 190 mm |
Material | ABS (Acrylonitrile-Butadiene-Styrene Copolymerisate) |
Thickness | 14 mm |
Voltage | 12 V |
Outer/Inner Mirror | Heatable, Convex |
Weight | 0.262 kg |
Section | Lower Section |
Type | Mirror Glass, exterior mirror |
Camber Radius | 300 mm |
Function | Mirror Glass, exterior mirror |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Engine Compartment Noise Insulation |
Weight | 0.655 kg |
Type | Engine Compartment Noise Insulation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 139.7 mm |
Width | 67.9 mm |
Wear Warning Contact | prepared for wear warning indicator |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 16.8 mm |
Function | Brake Pad Set, disc brake |
Weight | 1.57 kg |
Type | Brake Pad Set, disc brake |
Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.073 kg |
Placement on Vehicle | Front Axle |
Length | 90 mm |
Material | PU (Polyurethane) |
Function | Rubber Buffer, suspension |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.065 kg |
Width | 15 mm |
Number of Teeth | 130 |
Belts | with trapezoidal tooth profile |
Function | Timing Belt |
Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.433 kg |
Type | Mounting Kit, charger |
Function | Mounting Kit, charger |
for OE number | 11 62 7 805 457 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023