Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.31 kg |
| Placement on Vehicle | Rear Axle |
| Type | Gasket Set, wheel hub |
| Function | Gasket Set, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, wheel bearing (18201)
- 1x Febi Seal Ring, wheel hub (09827)
- 1x Febi Shaft Seal, wheel bearing (18200)
- 4x Febi Seal Ring, wheel hub (02191)
- 2x Febi Circlip, brake anchor pin (04767)
- 1x Febi Washer (10405)
£28.31
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Rod/Strut | Pull Rod |
| Placement on Vehicle | Rear Axle Left, Upper, Front, Rear Axle Right |
| Length | 384 mm |
| Material | Cast Steel |
| Additional Information 2 | with rubber mount |
| Weight | 1.370 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.31
Important compatibility info
| Material | FPM (fluoride rubber), NBR (nitrile butadiene rubber) |
| Weight | 0.250 kg |
| Function | Gasket Set, wheel hub |
| Type | Gasket Set, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.31
Important compatibility info
| Weight | 0.61 kg |
| Length | 2000 mm |
| Function | Speedometer Cable |
| Driver Position | for right-hand drive vehicles |
| Type | Speedometer Cable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.31
Important compatibility info
| Weight | 0.41 kg |
| Material | Rubber/Metal |
| Placement on Vehicle | Rear Axle |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.32
Important compatibility info
| Weight | 0.26 kg |
| Function | Gasket, cylinder head |
| Type | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.33
Important compatibility info
| Placement on Vehicle | Left |
| Shape/Form | round |
| Height | 140 mm |
| Width | 140 mm |
| Inspection Tag | ADR |
| Light Function | with rear fog light (LED), without number plate light |
| Weight | 0.452 kg |
| Depth | 86 mm |
| Voltage from | 12 V |
| Voltage to | 24 V |
| Type | Tail Light Assembly |
| Fulfils ECE norm | R148, R150, R10 |
| Temperature range from | -40 °C |
| Temperature range to | 65 °C |
| Function | Tail Light Assembly |
| Distance of fastening bolts | 45 mm |
| Protection Type (IP Code) | IP6K9K |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.33
Important compatibility info
| Weight | 2.67 kg |
| Placement on Vehicle | Front Axle |
| Length | 184.6 mm |
| Width | 66.5 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.33
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 290 mm |
| Diameter | 1 mm |
| Material | Steel |
| Weight | 0.620 kg |
| Type | Link/Coupling Rod, stabiliser bar |
| Paired article numbers | 183960 |
| Rod/Strut | Coupling Rod |
| Thread Length | 23 mm. 45 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,5 |
| Thickness | 370 mm |
| Spanner Size | 18 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.33
Important compatibility info
| Function | Tie Rod End |
| Length | 142 mm |
| Placement on Vehicle | Front Axle |
| Weight | 1.892 kg |
| Thread Type | with right-hand thread |
| Extra Description | ProKit |
| Type | Tie Rod End |
| External Thread Size | M24 x 1,5, M30 x 1,5 |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.34
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Type | Wheel Bearing Kit |
| Inner diameter | 40 mm |
| Width | 40 mm |
| Weight | 0.794 kg |
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring |
| Outer diameter | 78 mm |
| Additional Information | with fastening/mounting material |
| Replaces | 104302 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.34
Important compatibility info
| Weight | 0.609 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, automatic transmission |
| Type | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.34
Important compatibility info
| Weight | 0.053 kg |
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 106465 |
| Cable Length | 470 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.35
Important compatibility info
| Outer diameter | 82 mm. 79 mm |
| Thickness | 180 mm. 85 mm |
| Weight | 0.4 kg |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.35
Important compatibility info
| Weight | 3.0 kg |
| Rotor Style | Solid |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 240 mm |
| Thickness | 41.1 mm |
| Brake Disc Thickness | 11 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 60 mm |
| Surface | Coated |
| Number of mounting bores | 3 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.35
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 17.5 mm |
| Brake System | Lucas |
| Inspection Tag | ECE R90 Approved |
| Length | 116.5 mm |
| Width | 50 mm |
| Placement on Vehicle | Rear Axle |
| Weight | 1.17 kg |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.35
Important compatibility info
| Weight | 1.09 kg |
| Placement on Vehicle | Rear Axle Left, Upper, Rear, Rear Axle Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.35
Important compatibility info
| Weight | 0.158 kg |
| Resistance | 550 Ohm |
| Number of Connectors / Ports | 2 |
| Cable Length | 1750 mm |
| Type | Sensor, crankshaft pulse |
| Function | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.36
Important compatibility info
| Weight | 2.04 kg |
| Placement on Vehicle | Front Axle |
| Length | 155.2 mm |
| Width | 68.4 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 19.5 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.36
Important compatibility info
| External Thread Size | M12 x 1,75 |
| Pipe Diameter | 10 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Thread Length | 29.3 mm |
| Spanner Size | 18 |
| Rod/Strut | Coupling Rod |
| Length | 270 mm |
| Material | Steel |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 0.46 kg |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
| Replaces | 43451 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.36
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023