Important compatibility info
| Type | Mounting, control/trailing arm |
| Placement on Vehicle | Front Axle Left, Rear Axle Lower, Front Axle Right |
| Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, control/trailing arm (36880)
- 4x Febi Mounting, control/trailing arm (09397)
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Resistance | 1150 Ohm |
| Cable Length | 3034 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Brake Hose |
| Type | Brake Hose |
| Paired article numbers | 171041 |
| Spanner Size | 12 |
| Placement on Vehicle | Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 2495 mm |
| Type | V-Ribbed Belt |
| Number of Ribs | 10 |
| Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 34 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width of castor bearing surface | 23 mm |
| Material | Plastic |
| Outer diameter | 69 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 37 mm |
| Outer diameter | 230 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 4 mm |
| Type | Brake Shoe Set |
| Function | Brake Shoe Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower Right |
| Additional Information 2 | with quick couplers |
| Cooling Hose | from thermostat to radiator |
| Type | Radiator Hose |
| Hose Length | 250 mm |
| Function | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 1035 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Paired article numbers | 109726 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Additional Information 2 | with seal ring |
| Length | 47 mm |
| Spanner Size | 24 |
| Number of Connectors / Ports | 3 |
| Type | Oil Pressure Switch |
| Function | Oil Pressure Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 414 mm |
| Paired article numbers | 21488 |
| Pipe Diameter | 14.5 mm |
| Function | Tie Rod |
| External Thread Size | M16 x 1,5, M14 x 1,5 |
| Type | Tie Rod |
| Steering | with tie rod end |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 57 mm |
| Outer diameter | 63 mm |
| Filter type | Pollen Filter |
| Type | Filter Set, cabin air |
| Function | Filter Set, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Sensor, wheel speed |
| Cable Length | 830 mm |
| Number of Connectors / Ports | 2 |
| Paired article numbers | 107658 |
| Placement on Vehicle | Rear Axle Left |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| for OE number | 50544422 SK |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
| Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 39042 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with clamps, with steering bellow |
| Additional Information | with grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (19935)
- 1x Febi Tie Rod End (10660)
- 1x Febi Bellow, steering (29206)
- 1x Febi Clamping Clip (38764)
- 1x Febi Clamping Clip (38756)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Spanner Size | 32, 15 |
| Function | Tie Rod |
| External Thread Size | M16 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with clamps, with steering bellow |
| Additional Information | with nuts |
| for OE number | 09 20 007 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (44446)
- 1x Febi Tie Rod End (41947)
- 1x Febi Bellow, steering (39602)
Important compatibility info
| Replaces | 108589 |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 259 mm |
| Thickness | 30.3 mm |
| Brake Disc Thickness | 9 mm |
| Minimum thickness | 7.5 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 62 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Wings | 7 |
| Water pump impeller material | Plastic |
| Function | Water Pump, engine cooling |
| Seal Material | Rubber |
| Housing material | Cast Aluminium |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 1 |
| Function | Knock Sensor |
| External Thread Size | M10 x 1,25 |
| Type | Knock Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 179888 |
| Type | Splash Guard, brake disc |
| Extra Description | febi Plus |
| Function | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 8A0 199 382 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Hand Feed Pump |
| Function | Hand Feed Pump |
| Extra Description | febi Plus |
| Material | PP (Polypropylene) |
| Length | 143 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Tensioner, timing chain |
| Operating Mode | Hydraulic |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Upper, Front Axle Left, Front |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 40746 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | with bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (32318)
- 1x Febi Screw (31032)
- 1x Febi Nut (22263)
- 1x Febi Bolt, control arm (39749)
- 1x Febi Nut (32615)
- 1x Febi Washer (39748)
- 1x Febi Screw (21478)
- 1x Febi Nut (24799)
- 1x Febi Screw (24796)
- 1x Febi Nut (14392)
Important compatibility info
| Placement on Vehicle | Outer, Rear, Rear Axle Left, Lower, Rear Axle Right |
| Outer diameter | 40 mm |
| Thickness | 50 mm |
| Inner diameter | 12 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 44 mm |
| Opening Temperature | 88 °C |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with bolts/screws, with seal ring |
| Type | Hydraulic Filter Kit, automatic transmission |
| Function | Hydraulic Filter Kit, automatic transmission |
| Seal Material | Paper |
| Filter type | Screen Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Hydraulic Filter, automatic transmission (12672)
- 1x Febi Seal Ring, hydraulic filter (11673)
- 2x Febi Screw (11674)
- 1x Febi Gasket, automatic transmission oil sump (23955)
Important compatibility info
| Manufacturer | CITROEN DS PEUGEOT TOYOTA VAUXHALL |
| Length | 155.2 mm |
| Placement on Vehicle | Front Axle |
| Width | 70.4 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Additional Information 2 | with piston clip |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 17.1 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Rear Axle Left, inner, Rear Axle Right |
| Thickness | 85 mm |
| Outer diameter | 61 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Inner diameter | 14 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | BP4N-39-070D |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Housing material | Cast Aluminium |
| Number of Wings | 14 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Paper |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Linkage Damper, injection system |
| Type | Linkage Damper, injection system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Oil sump |
| Extra Description | febi Plus |
| Type | Oil sump |
| Additional Information | with oil drain plug |
| Additional Information 2 | with seal ring |
| for OE number | 06 52 125 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 2000 mm |
| Function | Speedometer Cable |
| Driver Position | for right-hand drive vehicles |
| Type | Speedometer Cable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Metal |
| Thickness | 1.57 mm |
| Notches / Holes Number | 2 |
| Function | Gasket, cylinder head |
| Type | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Paired article numbers | 106304 |
| Function | Suspension Strut Support Mount |
| Placement on Vehicle | Front Axle Right |
| Material | Rubber/Metal |
| Additional Information 2 | without ball bearing |
| Type | Suspension Strut Support Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with axle nut |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Inner diameter | 45 mm |
| Bearing Type | Angular Ball Bearing |
| Width | 40 mm |
| Outer diameter | 84 mm |
| Additional Information 2 | with retaining ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (173847)
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | 82 00 365 465 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 19980 |
| Replaces | 06490 |
| Placement on Vehicle | Front Axle Left, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Slave Cylinder |
| Type | Slave Cylinder |
| Stroke | 48 mm |
| Inner diameter | 8 mm |
| External Thread Size | M8 x 1,25, M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 720 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Paired article numbers | 175985 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Hose Length | 420 mm |
| Function | Charge Air Hose |
| Width | 75 mm |
| Turbocharger line | Charge air cooler to intake manifold |
| Wall Thickness | 5 mm |
| Type | Charge Air Hose |
| Placement on Vehicle | Charge Air Cooler, Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Front Axle |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (180183)
- 2x Febi Rubber Buffer, suspension (180339)
Important compatibility info
| Length | 99.5 mm |
| Voltage | 11 V |
| Spanner Size | 10 |
| Fitting Depth | 24.5 mm |
| Glow Plug Type | after-glow capable |
| Type | Glow Plug |
| Function | Glow Plug |
| External Thread Size | M10 x 1 |
| Current Strength | 10 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left Front |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 06 84 681 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Ribs | 6 |
| Function | Alternator Freewheel Clutch |
| Additional Information 2 | with lid |
| Type | Alternator Freewheel Clutch |
| for OE number | 03C 903 119 C |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 320 mm |
| Material | Steel |
| Rod/Strut | Guide Rod |
| Inner diameter 1 | 22 mm |
| Inner diameter 2 | 17 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Additional Information | with rubber-metal mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with rubber-metal mount |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 381 mm |
| Material | Steel |
| Rod/Strut | Guide Rod |
| Inner diameter 1 | 17 mm |
| Inner diameter 2 | 22 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 150 mm. 243 mm |
| Thickness | 391 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Additional Information | without piston |
| Replaces | 15016 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness/Strength 1 | 19 mm |
| Type | Brake Pad Set, disc brake |
| Cable Length | 260 mm |
| Function | Brake Pad Set, disc brake |
| Inspection Tag | ECE R90 Approved |
| Placement on Vehicle | Rear Axle |
| Length | 164.7 mm |
| Width | 66.4 mm |
| Wear Warning Contact | incl. wear warning contact |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































