Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle Left, Lower, Front, Rear Axle Right |
| Material | Sheet Steel |
| Additional Information 2 | with bearing |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Outer diameter | 150 mm |
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 152 mm |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Outer diameter | 84.5 mm |
| External Teeth, Wheel Side | 25 |
| Seal Diameter | 51 mm |
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 24 |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with gasket/seal |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Paper |
| Number of Wings | 10 |
| Housing material | Cast Aluminium |
| Type | Water Pump, engine cooling |
| Diameter 1 | 74 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | AEM (Ethylene Acrylate Rubber) |
| Type | Gasket, cylinder head cover |
| Function | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 86 mm. 59 mm |
| Inner diameter | 44 mm |
| Type | Bellow, driver cab suspension |
| Function | Bellow, driver cab suspension |
| Length | 300 mm |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 55 mm |
| Type | Bracket, stabiliser mounting |
| Function | Bracket, stabiliser mounting |
| Bore Diameter | 96 mm |
| Radius | 32.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Filter Set, cabin air |
| Type | Filter Set, cabin air |
| Height | 30 mm |
| Width | 220 mm |
| Filter type | Activated Carbon Filter |
| Length | 348 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Sensor, camshaft position |
| Length | 24 mm |
| Type | Sensor, camshaft position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Upper, Lower, Rear Axle Right |
| Inner diameter | 12 mm |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Suspension Spring |
| Type | Suspension Spring |
| Outer diameter | 134 mm |
| Length | 330 mm |
| Placement on Vehicle | Front Axle |
| Wire Diameter | 11.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 185 mm |
| Width | 132 mm |
| Voltage | 12 V. 24 V |
| Inspection Tag | EMC, ADR |
| Bulb Type | H1 |
| Port / Connector type | DIN Connector |
| Rated Power | 55 W, 70 W |
| Light Design | Halogen |
| Protection Type (IP Code) | IP67 |
| Type | Rotating Beacon |
| Fulfils ECE norm | R65, R10 |
| Temperature range from | -30 °C |
| Temperature range to | 50 °C |
| Function | Rotating Beacon |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Connecting Rod, air compressor |
| Function | Connecting Rod, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Plastic |
| Function | Expansion Tank, coolant |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
| Number of Connectors / Ports | 2 |
| Additional Information | with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Metal |
| Length | 530 mm |
| Width | 333 mm |
| Function | Housing Cover, crankcase |
| Extra Description | febi Plus |
| Type | Housing Cover, crankcase |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Function | Shaft Seal, differential |
| Sealing lip material | FPM (fluoride rubber) |
| Type | Shaft Seal, differential |
| Outer diameter 1 | 135 mm |
| Inner diameter | 80 mm |
| Thickness | 18 mm |
| Outer diameter | 154 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of circuits | 4 |
| Cable Length | 100 mm |
| Function | Cable Repair Set, interior blower motor |
| Extra Description | febi Plus |
| Type | Cable Repair Set, interior blower motor |
| Additional Information | with squeeze connector |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (188234)
- 2x Febi Protective Cap/Bellow, shock absorber (195026)
Important compatibility info
| Type | Tensioner, timing belt |
| Function | Tensioner, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Upper |
| Material | Plastic |
| Engine Management | Timing Chain |
| Function | Guide, timing chain |
| Type | Guide, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cooling Hose | from engine to heat exchanger |
| Material | Plastic |
| Colour | Black |
| Function | Coolant Pipe |
| Extra Description | febi Plus |
| Additional Information 2 | with retaining strap |
| Type | Coolant Pipe |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Sensor, camshaft position |
| Placement on Vehicle | Front |
| Type | Sensor, camshaft position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 57 mm |
| Outer diameter | 230 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 4 mm |
| Type | Brake Shoe Set |
| Function | Brake Shoe Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left Rear, Right Rear |
| Length | 2260 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Length | 1440 mm |
| Outer diameter | 8.5 mm |
| Inner diameter | 4 mm |
| Pressure | 400 bar |
| Function | Hose Line, driver cab tilting device |
| Type | Hose Line, driver cab tilting device |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 413 mm |
| Additional Information | with lock nut |
| Paired article numbers | 182787 |
| Type | Tie Rod |
| Function | Tie Rod |
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 71.5 mm. 38 mm |
| Inner diameter | 10 mm |
| Function | Bush Set, axle beam |
| Thickness | 80 mm |
| Type | Bush Set, axle beam |
| Additional Information 2 | with bolts/screws |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bushing, axle beam (27290)
- 2x Febi Screw (32613)
- 2x Febi Nut (32615)
Important compatibility info
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Inner diameter | 14 mm |
| Function | Repair Kit, suspension strut support mount |
| External Thread Size | M8 x 1,25 |
| Type | Repair Kit, suspension strut support mount |
| Height | 72 mm |
| Outer diameter | 129 mm |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (106698)
Important compatibility info
| Seal Material | NBR (nitrile butadiene rubber) |
| Additional Information 2 | with oil sump gasket |
| Height | 54 mm |
| Width | 154 mm |
| Length | 178.2 mm |
| Type | Hydraulic Filter Kit, automatic transmission |
| Function | Hydraulic Filter Kit, automatic transmission |
| Transmission Type | 6-Speed Automatic Transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023





























