Important compatibility info
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Housing Type | with housing |
Opening Temperature | 102 °C |
Weight | 0.184 kg |
Additional Information | with gasket/seal, with temperature sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.516 kg |
Placement on Vehicle | Front Axle |
Length | 200 mm |
Width | 108 mm |
Material | PU (Polyurethane), Thermoplast |
Type | Dust Cover Kit, shock absorber |
Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (170024)
- 2x Febi Rubber Buffer, suspension (45074)
Important compatibility info
Weight | 1.64 kg |
Placement on Vehicle | Front Axle |
Length | 374 mm |
Function | Suspension Spring |
Type | Suspension Spring |
Wire Diameter | 11.8 mm |
Outer diameter | 148 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1,25, M16 x 1,5 |
Weight | 0.987 kg |
Placement on Vehicle | Front Axle Left |
Length | 415 mm |
Paired article numbers | 21489 |
Pipe Diameter | 14.5 mm |
Function | Tie Rod |
Type | Tie Rod |
Steering | with tie rod end |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Wire Diameter | 11.8 mm |
Weight | 2.0 kg |
Placement on Vehicle | Rear Axle |
Length | 388 mm |
Outer diameter | 113 mm |
Number of Coils | 7.7 |
Type | Suspension Spring |
Function | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.66 kg |
Height | 160 mm |
Outer diameter | 98 mm |
Filter type | In-Line Filter, with filter heating |
Pipe Diameter | 10 mm |
Type | Fuel filter |
Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Inner Tie Rod |
Outer diameter | 1 mm |
Weight | 0.51 kg |
Length | 304 mm |
Additional Information 2 | with spacer disc |
External Thread Size | M12 x 1,25, M14 x 1,25 |
Type | Inner Tie Rod |
for OE number | 45503-19185 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 21 mm |
Material | Metal |
Outer diameter | 68 mm |
Inner diameter | 40 mm |
Weight | 0.25 kg |
Function | Deflection Pulley/Guide Pulley, timing belt |
Type | Deflection Pulley/Guide Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Front |
Additional Information | without bulb |
Paired article numbers | 194125 |
Weight | 0.35 kg |
Type | Direction Indicator |
Fulfils ECE norm | R6, R7, R91 |
Function | Direction Indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | PP (Polypropylene) |
Function | Expansion Tank, coolant |
Weight | 0.45 kg |
Additional Information 2 | without lid |
Type | Expansion Tank, coolant |
Additional Information | without coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Wire Diameter | 12.5 mm |
Weight | 2.3 kg |
Placement on Vehicle | Rear Axle |
Length | 353 mm |
Outer diameter | 118 mm |
Function | Suspension Spring |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 106 mm |
Material | Thermoplastic polyester elastomer |
Function | Bellow Kit, drive shaft |
Joint Type | Tripod Joint |
Type | Bellow Kit, drive shaft |
Weight | 0.215 kg |
Inner diameter 2 | 79 mm |
Inner diameter 1 | 22 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (184376)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Number of Connectors / Ports | 7 |
Cable Length | 700 mm |
Function | Ignition Switch |
Type | Ignition Switch |
Weight | 0.170 kg |
Additional Information 2 | with cable, with plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Front, Right Front |
Weight | 0.015 kg |
Number of Connectors / Ports | 4 |
Extra Description | febi Plus |
Type | Switch, window regulator |
Function | Switch, window regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Wire Diameter | 12.8 mm |
Type | Suspension Spring |
Weight | 2.2 kg |
Placement on Vehicle | Front Axle |
Length | 354 mm |
Outer diameter | 156 mm |
Function | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.704 kg |
Material | Rubber/Metal |
Placement on Vehicle | Front Axle Right |
Paired article numbers | 34457 |
Additional Information 2 | with ball bearing |
Type | Repair Kit, suspension strut support mount |
Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (34456)
- 1x Febi Rolling Bearing, suspension strut support mount (10091)
Important compatibility info
Weight | 2.54 kg |
External Thread Size | M24 x 1,5 |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Length | 160 mm |
Outer diameter | 91 mm |
External Teeth, Wheel Side | 30 |
Seal Diameter | 84.5 mm |
Internal Teeth, wheel side | 26 |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 3 |
Temperature range from | 95 °C |
Temperature range to | 107 °C |
Function | Temperature Switch, radiator fan |
External Thread Size | M14 x 1,5 |
Weight | 0.035 kg |
Type | Temperature Switch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.56 kg |
Placement on Vehicle | Front Axle Left, Upper, Front |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 36059 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, with rubber mount |
Cone Size | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 44 mm |
Opening Temperature | 88 °C |
Type | Thermostat, coolant |
Function | Thermostat, coolant |
Weight | 0.072 kg |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023