Proud to be a UK-based company
Contact us
Important compatibility info
| Internal Thread Size | M30 x 1,5 |
| Weight | 1.75 kg |
| Placement on Vehicle | Front Axle, Rear Axle |
| Length | 120 mm |
| Outer diameter | 40 mm |
| Thread Type | with right-hand thread |
| Cone Size | 32 mm |
| Extra Description | ProKit |
| External Thread Size | M27 x 1,5 |
| Additional Information | with sleeve, with lock nut |
| Type | Angled Ball Joint, steering push rod / Tie Rod End |
| Function | Angled Ball Joint, steering push rod / Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bolt, wheel alignment (43446)
- 1x Febi Tie Rod End (27481)
- 1x Febi Nut (26529)
£29.65
Important compatibility info
| Cable Length | 3930 mm |
| Function | Sensor, wheel speed |
| Number of Connectors / Ports | 2 |
| Resistance | 1750 Ohm |
| Type | Sensor, wheel speed |
| Weight | 0.214 kg |
| Placement on Vehicle | Front Axle Right |
| Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.66
Important compatibility info
| Type | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Front Axle |
| Function | Dust Cover Kit, shock absorber |
| Weight | 0.408 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (46486)
- 2x Febi Rubber Buffer, suspension (39953)
£29.66
Important compatibility info
| Weight | 0.10 kg |
| Function | Tensioner, timing chain |
| Type | Tensioner, timing chain |
| Operating Mode | Hydraulic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.66
Important compatibility info
| Weight | 1.5 kg |
| Placement on Vehicle | Rear Axle |
| Length | 360 mm |
| Outer diameter | 106 mm |
| Number of Coils | 7.7 |
| Type | Suspension Spring |
| Function | Suspension Spring |
| Wire Diameter | 10.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.66
Important compatibility info
| Weight | 0.83 kg |
| Placement on Vehicle | Rear, Lower |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.66
Important compatibility info
| Weight | 0.057 kg |
| Length | 535 mm |
| Number of Connectors / Ports | 3 |
| Cable Length | 475 mm |
| Function | Sensor, camshaft position |
| Placement on Vehicle | Intake Side |
| Type | Sensor, camshaft position |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.67
Important compatibility info
| Weight | 4.132 kg |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 266 mm |
| Thickness | 27.1 mm |
| Brake Disc Thickness | 13 mm |
| Minimum thickness | 11 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 66 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.67
Important compatibility info
| Weight | 0.380 kg |
| Number of Teeth | 114 |
| Belts | with rounded tooth profile |
| Function | Timing Belt Kit |
| Width | 17 mm |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (10995)
- 1x Febi Tensioner Pulley, timing belt (04880)
£29.67
Important compatibility info
| Rim Hole Number | 4 -Hole |
| Weight | 2.5 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 230 mm |
| Thickness | 40.3 mm |
| Brake Disc Thickness | 9 mm |
| Minimum thickness | 7 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 65 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.67
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Rear, Upper |
| Material | Rubber/Metal |
| Outer diameter | 51 mm |
| Thickness | 48 mm |
| Inner diameter | 14.1 mm |
| Weight | 0.250 kg |
| Shape/Form | slotted |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.67
Important compatibility info
| Weight | 1.140 kg |
| Height | 452 mm |
| Outer diameter | 181 mm |
| Inner diameter | 152 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.68
Important compatibility info
| Type | Handle, bonnet release |
| Length | 172 mm. 155 mm |
| Function | Handle, bonnet release |
| Weight | 0.108 kg |
| Mounting points diameter | 9.5 mm |
| Colour | Black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.68
Important compatibility info
| Weight | 0.11 kg |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
| Material | ACM (Polyacrylate) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.68
Important compatibility info
| Weight | 1.204 kg |
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Outer diameter | 150 mm |
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.69
Important compatibility info
| Additional Information 2 | with quick couplers |
| Weight | 0.524 kg |
| Placement on Vehicle | Lower Left |
| Cooling Hose | from radiator to water pipe |
| Type | Radiator Hose |
| Function | Radiator Hose |
| for OE number | 5Q0 122 051 AL |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.69
Important compatibility info
| Weight | 0.68 kg |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Inner diameter | 12 mm |
| Inner diameter 1 | 12 mm |
| Outer diameter 1 | 38 mm |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
| Width 1 | 20 mm |
| Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.69
Important compatibility info
| Outer diameter | 38 mm |
| Type | Hydraulic Filter, multi-plate clutch (all-wheel drive) |
| Extra Description | febi Plus |
| Height | 61 mm |
| Additional Information | for multi-plate clutch |
| Additional Information 2 | with bolts/screws, with top |
| Function | Hydraulic Filter, multi-plate clutch (all-wheel drive) |
| Inner diameter | 5 mm |
| Weight | 0.1 kg |
| Clutch ID | Haldex Gen IV |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.69
Important compatibility info
| Weight | 3.130 kg |
| Placement on Vehicle | Rear Axle |
| Width | 52 mm |
| Outer diameter | 254 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 6 mm |
| Type | Brake Shoe Set |
| Function | Brake Shoe Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.70
Important compatibility info
| Thickness/Strength 1 | 19 mm |
| Type | Brake Pad Set, disc brake |
| Weight | 1.939 kg |
| Placement on Vehicle | Front Axle |
| Length | 137 mm |
| Width | 57.5 mm |
| Inspection Tag | ECE R90 Approved |
| Function | Brake Pad Set, disc brake |
| Wear Warning Contact | incl. wear warning contact |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.70
Important compatibility info
| Weight | 0.01 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 75 mm |
| Number of Connectors / Ports | 2 |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.70
Important compatibility info
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Function | Suspension Strut Support Mount |
| Weight | 0.822 kg |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.70
Important compatibility info
| Weight | 0.125 kg |
| Function | Tensioner, timing chain |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.72
Important compatibility info
| Type | Connecting Rod, air compressor |
| Weight | 0.165 kg |
| Function | Connecting Rod, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.72
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 128.9 mm |
| Width | 48 mm |
| Wear Warning Contact | excl. wear warning contact |
| Thickness/Strength 1 | 19.5 mm |
| Function | Brake Pad Set, disc brake |
| Weight | 1.64 kg |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.72
Important compatibility info
| Weight | 0.596 kg |
| for OE number | 55196190 |
| Type | Slave Cylinder, clutch |
| Function | Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.72
Important compatibility info
| Weight | 3.150 kg |
| Placement on Vehicle | Front Axle |
| Length | 193.3 mm. 194.6 mm |
| Width | 64.6 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 18.4 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.72
Important compatibility info
| Weight | 0.35 kg |
| Additional Information 2 | with lid |
| Outer diameter | 55 mm |
| Inner diameter | 17 mm |
| Number of Ribs | 6 |
| Function | Alternator Freewheel Clutch |
| Type | Alternator Freewheel Clutch |
| for OE number | 611 155 00 15 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.73
Important compatibility info
| Number of circuits | 4 |
| Cable Length | 100 mm |
| Function | Cable Repair Set, interior blower motor |
| Extra Description | febi Plus |
| Type | Cable Repair Set, interior blower motor |
| Additional Information | with squeeze connector |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.74
Important compatibility info
| Weight | 0.026 kg |
| Number of Connectors / Ports | 4 |
| Type | Sensor, intake manifold pressure |
| Function | Sensor, intake manifold pressure |
| for OE number | 03G 906 051 D |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.74
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023