Important compatibility info
Height | 125 mm |
Outer diameter | 64 mm |
Filter type | Filter Insert |
Function | Oil Filter |
Inner diameter | 32 mm |
Type | Oil Filter |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 120 mm |
Outer diameter | 72 mm |
Inner diameter | 20 mm |
Filter type | Filter Insert |
Seal Diameter | 77 mm |
Type | Fuel filter |
Function | Fuel filter |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 40.5 mm |
Thickness | 31 mm |
Spanner Size | 46 |
Function | Centering Sleeve, propshaft |
Type | Centering Sleeve, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil Filter |
Type | Oil Filter |
Filter type | Filter Insert |
Outer diameter | 63 mm |
Height | 103 mm |
Material | Paper |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | frontal sided |
Width | 7 mm |
Outer diameter | 42 mm |
Inner diameter | 25 mm |
Function | Shaft Seal, camshaft |
Type | Shaft Seal, camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 225 mm |
Height | 30 mm |
Filter type | Pollen Filter |
Type | Filter Set, cabin air |
Width | 112 mm |
Function | Filter Set, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with clamp |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 130 mm |
Material | Rubber |
Inner diameter 1 | 9 mm |
Inner diameter 2 | 40 mm |
Type | Bellow Kit, steering |
Function | Bellow Kit, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (14083)
- 1x Febi Clamping Clip (38761)
Important compatibility info
Function | Gasket, intake manifold |
Type | Gasket, intake manifold |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thread Length | 4 mm |
Type | Screw Plug, automatic transmission casing |
Function | Screw Plug, automatic transmission casing |
External Thread Size | M8 x 1 |
Additional Information 2 | with seal ring |
Length | 9.5 mm |
Screw length below head | 7.5 mm |
Bolt Head/Nut Design | Hexagon Socket |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Quality/ Grade | 8.8 |
Type | Screw Plug, axle drive |
Function | Screw Plug, axle drive |
Screw length below head | 29 mm |
Diameter 1 | 16 mm |
Spanner Size | 8 |
Bolt Head/Nut Design | Hexagon Socket |
Surface | Zink flake coated |
Material | Steel |
External Thread Size | M10 x 1,5 |
Additional Information | with gasket/seal |
Length | 40 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Intake Side, Exhaust Side |
Valve type | for inlet valves, for exhaust valves |
Type | Valve Guide |
Function | Valve Guide |
Material | Grey Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 150 mm |
Filter type | Filter Insert |
Function | Air Filter |
Height | 57 mm |
Length | 255 mm |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil Hose |
Type | Oil Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | PU (Polyurethane) |
Length | 100 mm |
Placement on Vehicle | Front Axle |
Function | Rubber Buffer, suspension |
Width | 61 mm |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 47 mm |
Width | 46 mm |
Thickness | 42.5 mm |
Inner diameter | 18 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Wheel Side, Rear Axle Left, Rear Axle Right |
Length | 69 mm |
Material | Rubber |
Inner diameter 1 | 27 mm |
Inner diameter 2 | 68 mm |
Function | Bellow, drive shaft |
Type | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Cooling Hose | from coolant regulator housing to engine cooler |
Function | Radiator Hose |
Type | Radiator Hose |
for OE number | 1343.KX SK |
Placement on Vehicle | Upper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 737 mm |
Function | V-Ribbed Belt |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 5 |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Lower, Front Axle Left, Rear, Front Axle Right |
Material | Rubber/Metal |
Thickness | 58 mm |
Inner diameter | 16 mm |
Function | Mounting, control/trailing arm |
Outer diameter 2 | 68 mm |
Outer diameter 1 | 60 mm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 20 mm |
Function | Mounting, stabiliser bar |
Thickness | 41 mm |
Outer diameter | 52 mm |
Material | Rubber/Metal |
Placement on Vehicle | Front Axle |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 68 mm |
Outer diameter | 54 mm |
Inner diameter | 14 mm |
Filter type | Filter Insert |
Function | Fuel filter |
Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 48 mm |
Material | Sheet Steel |
Function | Bracket, stabiliser mounting |
Paired article numbers | 40866 |
Thickness | 70 mm |
Placement on Vehicle | Front Axle Right |
Length | 192 mm |
Extra Description | febi Plus |
Type | Bracket, stabiliser mounting |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right, outer |
Length | 44 mm |
Width | 36 mm |
Material | Rubber |
Thickness | 42 mm |
Inner diameter | 20 mm |
Type | Mounting, stabiliser bar |
Function | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Colour | Grey |
Number of Connectors / Ports | 2 |
Function | Switch, clutch control (cruise control) |
Type | Switch, clutch control (cruise control) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Function | Coolant Flange |
Placement on Vehicle | Front |
Type | Coolant Flange |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil Hose |
Type | Oil Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 42 mm |
Outer diameter | 62 mm |
Material | FPM (fluoride rubber) |
Thickness | 7 mm |
Placement on Vehicle | frontal sided |
Function | Shaft Seal, crankshaft |
Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Length | 125 mm |
Material | Rubber |
Inner diameter 1 | 24 mm |
Inner diameter 2 | 92 mm |
Function | Bellow, drive shaft |
Type | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 76 mm |
Type | Oil Filter |
Function | Oil Filter |
Filter type | Spin-on Filter |
Outer diameter | 76 mm |
Height | 109 mm |
Internal Thread Size | 3/4" - 16 UNF |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 242 mm |
Height | 47 mm |
Width | 120 mm |
Filter type | Filter Insert |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Joint Type | Tripod Joint |
Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
Length | 102 mm |
Material | Rubber |
Inner diameter 1 | 22 mm |
Inner diameter 2 | 76 mm |
Function | Bellow, drive shaft |
Type | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Filter, cabin air |
Function | Filter, cabin air |
Length | 216 mm |
Height | 23 mm |
Width | 196 mm |
Filter type | Pollen Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 272 mm |
Height | 58 mm |
Width | 118 mm |
Filter type | Filter Insert |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 39 mm |
Width | 42 mm |
Material | Rubber with fabric lining, Rubber |
Outer diameter | 41.5 mm |
Thickness | 41.5 mm |
Inner diameter | 23.5 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 115 mm |
Outer diameter | 70 mm |
Additional Information 2 | with seal ring |
Inner diameter | 12 mm |
Filter type | Filter Insert |
Seal Diameter | 79 mm |
Type | Fuel filter |
Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Chemical Properties | not resistant to rapeseed oil |
Length | 75 mm |
Height | 54 mm |
Function | Fuel filter |
Type | Fuel filter |
Filter type | Filter Insert, Pre-Filter, with water separator |
Width | 75 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 88 mm |
Outer diameter | 76 mm |
Filter type | Spin-on Filter |
Type | Oil Filter |
Function | Oil Filter |
Gasket outer diameter | 72.3 mm |
Gasket inner diameter | 62.3 mm |
Internal Thread Size | 13/16" - 16 UNF |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Outer diameter | 45 mm. 34 mm |
Thickness | 59 mm |
Inner diameter | 14 mm |
Placement on Vehicle | Front Axle Left, Lower, Front, Front Axle Right |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | frontal sided |
Material | ACM (Polyacrylate) |
Outer diameter | 50 mm |
Thickness | 8 mm |
Inner diameter | 36 mm |
Function | Shaft Seal, camshaft |
Type | Shaft Seal, camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Filter, cabin air |
Filter type | Pollen Filter |
Width | 215 mm |
Height | 18 mm |
Length | 215 mm |
Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, stabiliser bar |
Length | 48 mm |
Outer diameter | 37 mm |
Inner diameter | 17 mm |
Placement on Vehicle | Front Axle, outer |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Material | Thermoplastic polyester elastomer |
Thickness | 172 mm |
Function | Protective Cap/Bellow, shock absorber |
Type | Protective Cap/Bellow, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 70 mm |
Width | 59 mm |
Material | PU (Polyurethane) |
Type | Rubber Buffer, suspension |
Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Finger Follower, engine timing |
Type | Finger Follower, engine timing |
Replaces | 03564 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Outer diameter | 40 mm. 24 mm |
Thickness | 49 mm |
Inner diameter | 12 mm |
Placement on Vehicle | Front Axle Left, Lower, Front, Outer, Front Axle Right |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,5 |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Steering arm type | Control Arm |
Function | Mounting and Bolting Kit, control/trailing arm |
Type | Mounting and Bolting Kit, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Washer (08375)
- 1x Febi Screw (17277)
- 1x Febi Screw (17274)
- 2x Febi Nut (21055)
- 1x Febi Washer (17278)
Important compatibility info
Placement on Vehicle | Rear Axle Left, Outer, Rear Axle Right |
Outer diameter | 55 mm. 21 mm |
Thickness | 75 mm |
Inner diameter | 14 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Material | Rubber/Metal |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness | 15.5 mm |
Surface | Zinc-coated |
Function | Nut, input shaft (differential) |
Bolt Head/Nut Design | Male Star |
Internal Thread Size | M26 x 1,5 |
Type | Nut, input shaft (differential) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Material | Rubber |
Inner diameter | 25 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Spacer Sleeve |
Outer diameter | 39 mm. 36 mm |
Thickness | 16 mm |
Material | Steel |
Placement on Vehicle | Front and Rear |
Type | Spacer Sleeve |
Inner diameter | 32 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023