Proud to be a UK-based company
Contact us
Important compatibility info
| Width | 78 mm |
| Outer diameter | 120 mm. 34 mm |
| Inner diameter | 23 mm |
| Number of Holes | 4 |
| Bolt Hole Circle Diameter | 100 mm |
| Placement on Vehicle | Front Axle |
| Function | Wheel Hub |
| Weight | 1.336 kg |
| Type | Wheel Hub |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.49
Important compatibility info
| for OE number | 20576614 |
| Weight | 0.087 kg |
| Number of Connectors / Ports | 2 |
| Type | Sensor, coolant temperature |
| Function | Sensor, coolant temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.49
Important compatibility info
| Internal Teeth, wheel side | 24 |
| Function | Joint Kit, drive shaft |
| Seal Diameter | 58 mm |
| External Thread Size | M22 x 1,5 |
| Placement on Vehicle | Wheel Side, Front Axle |
| External Teeth, Wheel Side | 26 |
| Weight | 2.120 kg |
| Number of Teeth, ABS ring | 48 |
| Length | 150 mm |
| Outer diameter | 58 mm |
| Type | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.49
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 106939 |
| Number of Connectors / Ports | 2. 4. 6 |
| Function | Sensor, wheel speed |
| Weight | 0.218 kg |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.49
Important compatibility info
| Function | Joint Kit, drive shaft |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| External Teeth, Wheel Side | 30 |
| Thread Size | M24x1,5 |
| Type | Joint Kit, drive shaft |
| Weight | 2.230 kg |
| Internal Teeth, wheel side | 24 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.49
Important compatibility info
| Length | 232 mm |
| Height | 142 mm |
| Width | 195 mm |
| Filter type | Screen Filter |
| Function | Hydraulic Filter Kit, automatic transmission |
| Type | Hydraulic Filter Kit, automatic transmission |
| Weight | 0.325 kg |
| Additional Information 2 | with oil sump gasket |
| Number of mounting bores | 13 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.49
Important compatibility info
| Weight | 0.065 kg |
| Width | 15 mm |
| Number of Teeth | 130 |
| Belts | with trapezoidal tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.50
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Weight | 0.091 kg |
| Operating Mode | Pneumatic |
| Spanner Size | 27 |
| Thread Length | 14 mm |
| Number of Connectors / Ports | 2 |
| Function | Pressure Switch |
| Switch point from | 5.1 bar |
| Switch point to | 5.7 bar |
| Type | Pressure Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.50
Important compatibility info
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Weight | 1.44 kg |
| Bearing Type | Tapered Roller Bearing |
| Width | 54 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 90 mm |
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring |
| Inner diameter | 55 mm |
| Replaces | 44776 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.50
Important compatibility info
| External Thread Size | M8 x 1,25 |
| Weight | 1.129 kg |
| Function | Suspension Strut Support Mount |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | without ball bearing |
| Type | Suspension Strut Support Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.50
Important compatibility info
| Weight | 0.495 kg |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Function | Radiator Hose |
| Inner diameter 1 | 24 mm |
| Additional Information 2 | with clamps |
| Inner diameter 2 | 32 mm |
| Cooling Hose | from engine to engine cooler |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.50
Important compatibility info
| Weight | 0.045 kg |
| Number of Connectors / Ports | 3 |
| Function | RPM Sensor, automatic transmission |
| Type | RPM Sensor, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.50
Important compatibility info
| Width of castor bearing surface | 25 mm |
| Material | Metal |
| Outer diameter | 60 mm |
| Operating Mode | Automatic |
| Weight | 0.594 kg |
| Type | Belt Tensioner, v-ribbed belt |
| Function | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.50
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Length | 485 mm |
| Paired article numbers | 184028 |
| Weight | 0.440 kg |
| Type | Brake Hose |
| Function | Brake Hose |
| Internal Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.50
Important compatibility info
| Material | PTFE (polytetrafluoroethylene), ACM (Polyacrylate) |
| Weight | 0.14 kg |
| Function | Shaft Seal, crankshaft |
| Placement on Vehicle | transmission sided |
| Outer diameter | 185 mm |
| Thickness | 13 mm |
| Inner diameter | 135 mm. 145 mm |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.50
Important compatibility info
| Brake caliper piston diameter | 52 mm |
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178764 |
| Weight | 2.27 kg |
| Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.51
Important compatibility info
| Width | 18 mm |
| Number of Teeth | 120 |
| Belts | with trapezoidal tooth profile |
| Function | Timing Belt Kit |
| Weight | 0.897 kg |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (12661)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (02558)
£30.51
Important compatibility info
| Additional Information | with bush |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Cable Length | 3555 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Resistance | 1185 Ohm |
| Weight | 0.210 kg |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.51
Important compatibility info
| Weight | 0.407 kg |
| Placement on Vehicle | Front |
| Inner diameter | 30 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (21325)
£30.52
Important compatibility info
| Material | Rubber/Metal |
| Weight | 0.760 kg |
| Placement on Vehicle | Front Axle |
| External Thread Size | M8 x 1,5 |
| Additional Information 2 | with ball bearing |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (19675)
- 1x Febi Rolling Bearing, suspension strut support mount (19924)
£30.52
Important compatibility info
| Weight | 0.165 kg |
| Extra Description | febi Plus |
| Function | Oil Separator, crankcase ventilation |
| Type | Oil Separator, crankcase ventilation |
| for OE number | 11 61 7 503 520 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.53
Important compatibility info
| Weight | 1.5 kg |
| External Thread Size | M14 x 1,5 |
| Length | 1440 mm |
| Outer diameter | 8.5 mm |
| Inner diameter | 4 mm |
| Pressure | 400 bar |
| Function | Hose Line, driver cab tilting device |
| Type | Hose Line, driver cab tilting device |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.53
Important compatibility info
| Function | Suspension Spring |
| Outer diameter | 168 mm |
| Number of Coils | 4.6 |
| Length | 376 mm |
| Placement on Vehicle | Front Axle |
| Weight | 2.55 kg |
| Type | Suspension Spring |
| Wire Diameter | 13.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.53
Important compatibility info
| Placement on Vehicle | Left Front, Upper, Lower |
| Weight | 0.59 kg |
| Type | Door Hinge |
| Function | Door Hinge |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.53
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Weight | 0.416 kg |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (188604)
- 2x Febi Protective Cap/Bellow, shock absorber (109362)
£30.53
Important compatibility info
| Function | Repair Kit, tilt pump |
| Weight | 0.11 kg |
| Type | Repair Kit, tilt pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.53
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Height | 19.6 mm |
| Material | Steel |
| Outer diameter | 188 mm |
| Inner diameter | 172 mm |
| Number of Teeth, ABS ring | 100 |
| Function | Sensor Ring, ABS |
| Weight | 0.54 kg |
| Type | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.53
Important compatibility info
| Weight | 0.526 kg |
| Placement on Vehicle | Front Axle |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
| for OE number | 48331-0D030 S2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (180840)
- 2x Febi Protective Cap/Bellow, shock absorber (186119)
£30.53
Important compatibility info
| Additional Information | with pipe socket |
| Lock System | with two keys |
| Additional Information 2 | with bolts/screws |
| Outer diameter | 95 mm |
| Thickness | 120 mm |
| Colour | Blue |
| Type | Sealing Cap, tank unit (Urea injection) |
| Function | Sealing Cap, tank unit (Urea injection) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.53
Important compatibility info
| Weight | 0.2 kg |
| Width | 26 mm |
| Material | Plastic |
| Outer diameter | 81.3 mm |
| Number of Ribs | 6 |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 22.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.53
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023