Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178099 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 54 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 183.5 mm |
| Width | 56.1 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.2 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Additional Information 2 | with anti-squeak plate, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 360 mm |
| Function | Suspension Spring |
| Wire Diameter | 13.8 mm |
| Type | Suspension Spring |
| Outer diameter | 109 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Upper, Front |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 36059 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with rubber mount |
| Cone Size | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Pressure | 8.5 bar |
| Type | Quick Release Valve |
| Function | Quick Release Valve |
| Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Aluminium |
| Placement on Vehicle | Front Axle Right, Upper, Front |
| Steering arm type | Control Arm |
| Paired article numbers | 36058 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with rubber mount |
| Cone Size | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Cap, fuel tank |
| Extra Description | febi Plus |
| Type | Cap, fuel tank |
| Lockable | Lockable |
| Material | Plastic |
| Lock System | with two keys, with lock |
| Additional Information | with valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness | 46 mm |
| Function | Repair Kit, guide strut |
| Outer diameter | 65 mm. 70 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Additional Information | with grease |
| Type | Repair Kit, guide strut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Molybdenum Grease (02582)
- 1x Febi Screw (35972)
- 1x Febi Ball Joint, axle strut (35986)
- 1x Febi Spacer Ring (35988)
- 1x Febi Lock Ring, steering knuckle (35990)
- 2x Febi Seal Ring (35991)
- 1x Febi Lock Ring, steering knuckle (35992)
- 1x Febi Fastening Clamp (35993)
- 1x Febi Spacer Disc, connector rod (35994)
- 1x Febi Circlip (35995)
Important compatibility info
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Function | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
| Type | Suspension Strut Support Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Roller Guide, sliding door |
| Extra Description | febi Plus |
| Placement on Vehicle | Right, Upper |
| Function | Roller Guide, sliding door |
| Driver Position | for right-hand drive vehicles |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Number of Connectors / Ports | 3 |
| Brake Type | Disc Brake |
| for OE number | 21296869 |
| Cable Length | 1890 mm |
| Type | Warning Contact, brake pad wear |
| Function | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 146 mm |
| Material | PU (Polyurethane), Rubber |
| Placement on Vehicle | Front Axle |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
| Length | 178 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (173593)
- 2x Febi Rubber Buffer, suspension (103822)
Important compatibility info
| Rotor Style | Solid |
| Bolt Hole Circle Diameter | 98 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 251 mm |
| Thickness | 50.7 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 9 mm |
| Type | Brake Disc Rotor |
| Centering Diameter | 59 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 372 mm |
| Function | Suspension Spring |
| Wire Diameter | 13 mm |
| Type | Suspension Spring |
| Outer diameter | 146 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with ball bearing |
| for OE number | 48609-02161 |
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left, Upper |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Steering arm type | Control Arm |
| Paired article numbers | 19647 |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Type | Control/Trailing Arm, wheel suspension |
| Replaces | 12421 |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (22410)
- 2x Febi Mounting, control/trailing arm (09741)
Important compatibility info
| Placement on Vehicle | Front Axle |
| Function | Repair Kit, suspension strut support mount |
| Extra Description | ProKit |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (09020)
- 1x Febi Nut (37671)
- 3x Febi Nut (37867)
- 1x Febi Rolling Bearing, suspension strut support mount (10091)
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Outer diameter | 240 mm. 130 mm |
| Thickness | 470 mm |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Additional Information | without piston |
| Version | Aftermarket |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 350 mm |
| Additional Information | without piston |
| Outer diameter 1 | 222 mm |
| Outer diameter 2 | 100 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle Right |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 180287 |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Placement on Vehicle | Rear Axle Left |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 180288 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M20 x 1,5 |
| Extra Description | ProKit |
| Function | Angled Ball Joint / Tie Rod End |
| Length | 77 mm |
| Placement on Vehicle | Front Axle |
| Cone Size | 23.5 mm |
| Type | Angled Ball Joint / Tie Rod End |
| Internal Thread Size | M26 x 1,5 |
| Additional Information | with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 85.25 mm |
| Function | Piston, air compressor |
| Type | Piston, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inner diameter 2 | 32.19 mm |
| Inner diameter 1 | 19.08 mm |
| Function | Connecting Rod, air compressor |
| Type | Connecting Rod, air compressor |
| Hole Spacing | 92.46 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for turbocharger (art. no.) | 189317, 192589, 187027, 186968, 188081 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 196 mm |
| Outer diameter | 89 mm |
| External Teeth, Wheel Side | 28 |
| Seal Diameter | 56 mm |
| Internal Teeth, wheel side | 25 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with squeeze connector |
| Additional Information 2 | with plug |
| Port / Connector type | Bosch |
| Number of Connectors / Ports | 5 |
| Version | Kompakt 1.1m |
| Cable Length | 250 mm |
| Type | Plug |
| Cross Section | 0.75 mm² |
| Function | Plug |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| Cable Length | 764 mm |
| Type | Sensor, wheel speed |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Replaces | 19979 |
| Material | Rubber/Metal |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 7550024 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle |
| Thread Size | M16x1,5 |
| Number of Teeth, ABS ring | 48 |
| ABS Ring Diameter | 83 mm |
| Number of Teeth 1 | 38 |
| Number of Teeth 2 | 36 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | PA (polyamide) |
| Type | Pump, fuel pre-supply |
| Function | Pump, fuel pre-supply |
| External Thread Size | M33 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 19.2 mm. 21.9 mm |
| Outer diameter | 53.1 mm. 63 mm |
| Inner diameter | 47.7 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| for OE number | 5131.A6 S1 |
| Function | Repair Kit, axle beam |
| Type | Repair Kit, axle beam |
Additional Information
Technical Information
To identify the correct article, the currently installed product must be determined!
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness/Strength 1 | 19 mm |
| Type | Brake Pad Set, disc brake |
| Placement on Vehicle | Front Axle |
| Length | 137 mm |
| Width | 57.5 mm |
| Inspection Tag | ECE R90 Approved |
| Function | Brake Pad Set, disc brake |
| Wear Warning Contact | incl. wear warning contact |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 157 mm |
| Width | 62 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 16 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | without ball bearing |
| for OE number | MR455018 |
| Material | Rubber/Metal |
| Function | Suspension Strut Support Mount |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Suspension Strut Support Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 240 mm |
| Type | Gas Spring, boot/cargo area |
| Mounting points diameter | 16.5 mm |
| Stroke | 76 mm |
| Housing Diameter | 18 mm |
| Eject Force | 350 N |
| Placement on Vehicle | Left Rear |
| Function | Gas Spring, boot/cargo area |
| Housing length | 139.5 mm |
| Piston conrod diameter | 8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Ribs | 7 |
| Outer diameter | 68.7 mm |
| Additional Information 2 | with lid |
| Inner diameter | 17 mm |
| Type | Alternator Freewheel Clutch |
| Function | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 249 mm |
| Thickness | 35 mm |
| Brake Disc Thickness | 10 mm |
| Rotor Style | Solid |
| Function | Brake Disc |
| Centering Diameter | 71 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Rim Hole Number | 4 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 135.3 mm |
| Width | 74.6 mm. 68.8 mm |
| Additional Information 2 | with anti-squeak plate |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 18.6 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 258 mm |
| Thickness | 40.2 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8.4 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 76 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 260 mm |
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Centering Diameter | 72 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Number of mounting bores | 1 |
| Thickness | 40 mm |
| Brake Disc Thickness | 10 mm |
| Rim Hole Number | 5 -Hole |
| Function | Brake Disc |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (07856)
- 1x Febi Mounting, control/trailing arm (07847)
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 169.2 mm |
| Width | 61.5 mm |
| Wear Warning Contact | incl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 19.2 mm |
| Function | Brake Pad Set, disc brake |
| Number of wear indicators | 1 Per Axle |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Seal Kit, multi-valve |
| Type | Seal Kit, multi-valve |
| Additional Information 2 | without spacer plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cone Size | 27 mm |
| Width | 66 mm |
| Thickness | 120 mm |
| Length | 103 mm |
| Placement on Vehicle | Front Axle |
| Internal Thread Size | M22 x 1,5 |
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Type | Angled Ball Joint / Tie Rod End |
| Function | Angled Ball Joint / Tie Rod End |
| Additional Information | with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with seal ring |
| Opening Temperature | 87 °C |
| Housing Type | with housing |
| Type | Thermostat Housing |
| Function | Thermostat Housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Upper, Front Axle Right, Front |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 40745 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | with bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (32319)
- 1x Febi Screw (31032)
- 1x Febi Nut (22263)
- 1x Febi Bolt, control arm (39749)
- 1x Febi Nut (32615)
- 1x Febi Washer (39748)
- 1x Febi Screw (21478)
- 1x Febi Nut (24799)
- 1x Febi Screw (24796)
- 1x Febi Nut (14392)
Important compatibility info
| Outer diameter | 56 mm |
| Thickness | 20 mm. 23 mm |
| Inner diameter | 20 mm |
| Number of Teeth | 19 |
| Engine Management | Timing Belt |
| Function | Sprocket, crankshaft |
| Type | Sprocket, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































