Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 1375 mm |
Number of Connectors / Ports | 2 |
Weight | 0.075 kg |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.118 kg |
Function | Master Cylinder, clutch |
Type | Master Cylinder, clutch |
Bore Diameter | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Teeth, wheel side | 22 |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
ABS Ring Diameter | 84 mm |
Number of Teeth, ABS ring | 47 |
Weight | 1.894 kg |
External Teeth, Wheel Side | 33 |
Thread Size | M20x1,5 |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.986 kg |
Int. teeth, diff.side, conn.to transm. | 34 |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Weight | 0.296 kg |
Type | Dust Cover Kit, shock absorber |
Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (188443)
- 2x Febi Protective Cap/Bellow, shock absorber (192650)
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 129 mm |
Material | Steel |
Spanner Size | 19 |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Weight | 0.38 kg |
External Thread Size | M12 x 1,25 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.2 kg |
Outer diameter | 110 mm |
Placement on Vehicle | both sides |
Bearing/Mounting Type | Rubber-Metal Mount |
Thickness | 68 mm |
Function | Mounting, engine |
Internal Thread Size | M10 x 1,5 |
Type | Mounting, engine |
Replaces | 28169; 28170 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Inner diameter | 60 mm. 65 mm |
Function | Radiator Hose |
Type | Radiator Hose |
Weight | 0.23 kg |
Hose Length | 330 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Outer diameter | 249 mm |
Thickness | 35 mm |
Brake Disc Thickness | 10 mm |
Rotor Style | Solid |
Function | Brake Disc |
Centering Diameter | 71 mm |
Minimum thickness | 8 mm |
Bolt Hole Circle Diameter | 108 mm |
Surface | Coated |
Weight | 3.0 kg |
Number of mounting bores | 2 |
Rim Hole Number | 4 -Hole |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Cap, oil filter housing |
Function | Cap, oil filter housing |
Outer diameter | 107 mm |
Weight | 0.24 kg |
Spanner Size | 36 |
Bolt Head/Nut Design | Male Hex |
Tightening Torque | 25 Nm |
Extra Description | febi Plus |
Height | 312 mm |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.267 kg |
Function | Oil Separator, crankcase ventilation |
Extra Description | febi Plus |
Type | Oil Separator, crankcase ventilation |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.05 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Manufacturer Restriction | Bosch (ABS/ESP 8.1) |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.19 kg |
Width | 22 mm |
Material | Metal |
Outer diameter | 50 mm |
Function | Tensioner Pulley, timing belt |
Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 920 mm |
Number of Connectors / Ports | 2 |
Resistance | 1200 Ohm |
Cable Length | 830 mm |
Function | Sensor, wheel speed |
Weight | 0.070 kg |
Type | Sensor, wheel speed |
Additional Information | with bush |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Joint Type | Tripod Joint |
Weight | 0.177 kg |
Inner diameter 2 | 79 mm |
Inner diameter 1 | 25 mm |
Material | Thermoplastic polyester elastomer |
Length | 105 mm |
Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (188120)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Length | 265 mm |
Function | Hydraulic Hose, steering |
Material | Rubber |
Type | Hydraulic Hose, steering |
Additional Information | with quick coupling |
Weight | 0.177 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.56 kg |
Length | 180 mm |
Width | 52 mm |
Thickness | 105 mm |
Inner diameter | 30 mm |
Placement on Vehicle | Front |
Function | Suspension, propshaft |
Type | Suspension, propshaft |
Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.193 kg |
Placement on Vehicle | Front Axle Left, Rear Axle Left, Front Axle Right, Rear Axle Right |
Resistance | 1150 Ohm |
Cable Length | 2690 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information | with bush |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right, transmission sided, Wheel Side |
Thread Size | M20x1,5 |
External Teeth, Wheel Side | 21 |
Internal Teeth, wheel side | 21 |
Weight | 1.726 kg |
Number of Teeth, ABS ring | 48 |
ABS Ring Diameter | 99 mm |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Joint Kit, drive shaft |
Weight | 1.8 kg |
Internal Teeth, wheel side | 22 |
Seal Diameter | 51 mm |
External Teeth, Wheel Side | 25 |
Outer diameter | 80 mm |
Length | 141 mm |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Function | Joint Kit, drive shaft |
External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023