Important compatibility info
| Additional Information | with gasket/seal |
| Housing Type | with housing |
| Opening Temperature | 82 °C |
| Function | Thermostat, coolant |
| Outer diameter | 36 mm |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Tensioner Pulley, timing belt |
| Outer diameter | 68 mm |
| Function | Tensioner Pulley, timing belt |
| Width | 41 mm |
| Width of castor bearing surface | 30 mm |
| Replaces | 193644 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 240 mm |
| Type | Intake Valve |
| Function | Intake Valve |
| Notches / Holes Number | 1 |
| Valve head diameter | 47.05 mm |
| Valve stem diameter | 9.275 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 360 mm |
| Function | Suspension Spring |
| Wire Diameter | 13.8 mm |
| Type | Suspension Spring |
| Outer diameter | 109 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle, Front Axle, Upper |
| Material | Rubber/Metal |
| Outer diameter | 85 mm |
| Steering arm type | for trailing arm |
| Mounting points diameter | 25 mm |
| Function | Repair Kit, control/trailing arm |
| Hole Spacing | 130 mm |
| Type | Repair Kit, control/trailing arm |
| Additional Information 2 | with retaining ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Pump, fuel pre-supply |
| Internal Thread Size | M14 x 1,5 |
| Type | Pump, fuel pre-supply |
| Additional Information 2 | with filter |
| Length | 105 mm |
| Height | 102 mm |
| Width | 75.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 107744 |
| Function | Sensor, wheel speed |
| Number of Connectors / Ports | 2 |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M10 x 1 |
| Placement on Vehicle | Rear Axle Left |
| Length | 800 mm |
| Thread Length | 11.5 mm |
| Type | Brake Hose |
| Function | Brake Hose |
| Paired article numbers | 174540 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left Rear |
| Width | 115 mm |
| Thickness | 85 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Outer Length | 115 mm |
| Function | Mounting, automatic transmission |
| Type | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 320 mm |
| Housing Diameter | 19 mm |
| Eject Force | 410 N |
| Stroke | 113 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, bonnet |
| Function | Gas Spring, bonnet |
| Housing length | 180.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Length | 57 mm |
| Type | Regulating Valve, oil pressure |
| Function | Regulating Valve, oil pressure |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | without coolant level sensor |
| Function | Expansion Tank, coolant |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
| for OE number | LR 004080 SK |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Function | Oil Line, charger |
| Type | Oil Line, charger |
| Forward- /Backflow | Return Line |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gas Spring, boot/cargo area |
| Housing length | 373 mm |
| Type | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 16.5 mm |
| Stroke | 213 mm |
| Eject Force | 375 N |
| Housing Diameter | 18 mm |
| Length | 614 mm |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Metal |
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Function | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left |
| Function | Mounting, transfer case |
| Type | Mounting, transfer case |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right Front |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 06 84 674 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 1000 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inspection Tag | ECE R90 Approved |
| Placement on Vehicle | Rear Axle |
| Width | 42 mm |
| Function | Brake Shoe Set |
| Type | Brake Shoe Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Cable Length | 885 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left Rear |
| Length | 226 mm |
| Function | Gas Spring, boot/cargo area |
| Housing Diameter | 18 mm |
| Eject Force | 100 N |
| Stroke | 70 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with holder |
| Placement on Vehicle | Rear Axle Left |
| Length | 607 mm |
| Paired article numbers | 179782 |
| Type | Brake Hose |
| Function | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Length | 805 mm |
| Paired article numbers | 179781 |
| Type | Brake Hose |
| Function | Brake Hose |
| Additional Information | with holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M18 x 1,5 |
| Function | Inner Tie Rod |
| Type | Inner Tie Rod |
| Spanner Size | 46 |
| Length | 177 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Internal Teeth, wheel side | 22 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| ABS Ring Diameter | 84 mm |
| Number of Teeth, ABS ring | 47 |
| External Teeth, Wheel Side | 33 |
| Thread Size | M20x1,5 |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Rotor Style | Solid |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 239 mm |
| Thickness | 33.6 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 65 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket Set, cylinder head cover |
| Material | ACM (Polyacrylate) |
| Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with bush |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Resistance | 1185 Ohm |
| Cable Length | 3440 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear |
| Function | Mounting, automatic transmission |
| Type | Mounting, automatic transmission |
| for OE number | 205 240 33 00 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right |
| Length | 157 mm |
| Width | 138 mm |
| Thickness | 75 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with seal ring |
| Opening Temperature | 87 °C |
| Housing Type | with housing |
| Type | Thermostat Housing |
| Function | Thermostat Housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Function | Washer Fluid Jet, headlight cleaning |
| Type | Washer Fluid Jet, headlight cleaning |
| Paired article numbers | 176706 |
| Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Oil Cooler, engine oil |
| Type | Oil Cooler, engine oil |
| Material | Aluminium |
| Core Length | 142 mm |
| Core Width | 80 mm |
| Core Depth | 35 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Steering arm type | Semi-Trailing Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Sheet Steel |
| Additional Information | with rubber-metal mounts |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | RPM Sensor, automatic transmission |
| Type | RPM Sensor, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle, Front |
| Length | 91 mm |
| Thickness | 66.5 mm |
| Inner diameter | 14 mm |
| Function | Mounting, differential |
| Material | Rubber/Metal |
| Type | Mounting, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thickness | 79.2 mm |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Housing Type | with housing |
| Additional Information | with gasket/seal |
| Opening Temperature | 87 °C |
| Additional Information 2 | with Temperature Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cone Size | 32 mm |
| Extra Description | ProKit |
| Function | Tie Rod End |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
| Length | 151 mm |
| Placement on Vehicle | Front Axle |
| External Thread Size | M30 x 1,5 |
| Internal Thread Size | M24 x 1,5 |
| Thread Type | with right-hand thread |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with bearing |
| Material | Sheet Steel |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Placement on Vehicle | Upper, Rear Axle Left, Rear Axle Right, outer |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Guide Rails Kit, timing chain |
| Engine Management | Timing Chain |
| Type | Guide Rails Kit, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Guide, timing chain (10933)
- 1x Febi Guide, timing chain (09167)
- 1x Febi Guide, timing chain (09166)
- 1x Febi Guide, timing chain (09165)
Important compatibility info
| Rim Hole Number | 4 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 231 mm |
| Thickness | 44.1 mm |
| Brake Disc Thickness | 17 mm |
| Minimum thickness | 15 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 60 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Air Dryer Cartridge, compressed-air system |
| Height | 176 mm |
| Outer diameter | 136 mm |
| Internal Thread Size | M39 x 1,5 |
| Additional Information 2 | with seal ring, with integrated oil separator |
| Type | Air Dryer Cartridge, compressed-air system |
| Spanner Size | 30 |
| Thread Type | with right-hand thread |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Mounting points diameter | 9 mm |
| Type | Housing, differential |
| Function | Housing, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 35 mm |
| Material | Metal |
| Outer diameter | 60 mm |
| Inner diameter | 10 mm |
| Function | Deflection Pulley/Guide Pulley, timing belt |
| for OE number | 13073AA142 |
| Type | Deflection Pulley/Guide Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 120 mm |
| Outer diameter | 42 mm |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 39558 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 39557 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 42 mm |
| Width | 48 mm |
| Thickness | 35 mm |
| Inner diameter | 6.5 mm |
| Number of Connectors / Ports | 3 |
| Hole Spacing | 34 mm |
| Function | Sensor, intake manifold pressure |
| Type | Sensor, intake manifold pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Teeth, Wheel Side | 25 |
| Seal Diameter | 49 mm |
| Internal Teeth, wheel side | 21 |
| Type | Joint Kit, drive shaft |
| External Thread Size | M18 x 1,5 |
| Function | Joint Kit, drive shaft |
| Outer diameter | 75 mm |
| Length | 147 mm |
| Placement on Vehicle | Wheel Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































