Important compatibility info
Weight | 1.01 kg |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Type | Mounting, engine |
for OE number | 210 240 12 17 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.025 kg |
Length | 47 mm |
Spanner Size | 24 |
Surface | Zinc-coated |
Thread Length | 12 mm |
Number of Connectors / Ports | 1 |
External Thread Size | M12 x 1,5 |
Function | Oil Pressure Switch |
Switch point to | 0.5 bar |
Switch point from | 0.2 bar |
Type | Oil Pressure Switch |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with fastening/mounting material |
Weight | 0.996 kg |
Placement on Vehicle | Rear Axle |
Width | 25 mm |
Outer diameter | 180 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 3.3 mm |
Function | Brake Shoe Set, parking brake |
Type | Brake Shoe Set, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Brake Shoe Set, parking brake (04446)
- 1x Febi Accessory Kit, brake shoes (32169)
Important compatibility info
Parameter | 6PK |
Type | Belt Pulley, crankshaft |
Width | 62 mm |
Outer diameter | 197 mm |
Inner diameter | 16 mm |
Number of Ribs | 5 |
Weight | 4.576 kg |
Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.02 kg |
Placement on Vehicle | frontal sided |
Material | ACM (Polyacrylate) |
Outer diameter | 50 mm |
Thickness | 8 mm |
Inner diameter | 36 mm |
Function | Shaft Seal, camshaft |
Type | Shaft Seal, camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.890 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 50 mm |
Outer diameter | 74 mm |
Inner diameter | 30 mm |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing material | Aluminium |
Light Distribution | Spot illumination |
Temperature range to | 60 °C |
Temperature range from | -40 °C |
Weight | 0.722 kg |
Width | 142 mm |
Inspection Tag | EMC |
Colour | Blue |
Cable Length | 1500 mm |
Depth | 85 mm |
Voltage from | 9 V |
Voltage to | 64 V |
Protection Type (IP Code) | IP6K9K |
Type | Surround Light |
Function | Surround Light |
Extra Description | ProKit |
Rated Power | 10 W |
Height | 121 mm |
Light Design | LED |
Light colour | blue |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 128 mm |
Placement on Vehicle | Rear Axle |
Material | Rubber/Metal |
Weight | 1.080 kg |
Width | 111 mm |
Function | Rubber Buffer, suspension |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 80 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Type | Belt Tensioner, v-ribbed belt |
Weight | 1.062 kg |
Width of castor bearing surface | 32 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Cable Length | 475 mm |
Weight | 0.053 kg |
Number of Connectors / Ports | 2 |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Length | 280 mm |
Material | Rubber |
Additional Information 2 | with clamps |
Paired article numbers | 196574 |
Inner diameter 1 | 15 mm |
Inner diameter 2 | 55 mm |
Weight | 0.222 kg |
Type | Bellow Kit, steering |
Function | Bellow Kit, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with oil drain plug |
Weight | 3.65 kg |
Additional Information 2 | with seal ring |
External Thread Size | M16 x 1,5 |
Length | 421 mm |
Wet Sump Material | Aluminium |
Type | Oil sump |
Function | Oil sump |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Glow Plug |
Length | 134 mm |
Voltage | 4.4 V |
Spanner Size | 10 |
Weight | 0.03 kg |
Glow Plug Type | Metal glow plug |
Function | Glow Plug |
External Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 27 21 010 05R |
Voltage | 12 V |
Number of Connectors / Ports | 2 |
Rated Power | 204 W |
Weight | 1.4 kg |
Type | Interior Blower |
Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Weight | 0.086 kg |
Number of Ribs | 6 |
Length | 1005 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Hose |
Type | Brake Hose |
Placement on Vehicle | Rear Axle Left, Rear Axle Right, outer |
Length | 188 mm |
Weight | 0.07 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle, Wheel Side |
Length | 130 mm |
Material | Thermoplast |
Function | Bellow Kit, drive shaft |
Weight | 0.2 kg |
Type | Bellow Kit, drive shaft |
Inner diameter 1 | 23 mm |
Inner diameter 2 | 81 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (12854)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (45643)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 3.067 kg |
Steering arm type | Control Arm |
Cone Size 2 | 23 mm |
Paired article numbers | 182070 |
Placement on Vehicle | Front Axle Left |
Material | Aluminium |
Additional Information | with supporting/ball joint |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Cone Size 1 | 18 mm |
External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Function | Accessory Kit, disc brake pad |
Type | Accessory Kit, disc brake pad |
Weight | 0.170 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.09 kg |
Width | 18 mm |
Number of Teeth | 124 |
Belts | with trapezoidal tooth profile |
Function | Timing Belt |
Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.047 kg |
Placement on Vehicle | Front Axle |
Length | 105 mm |
Width | 54.6 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17.5 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Wear Warning Contact | incl. wear warning contact |
Replaces | 116043 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inspection Tag | ECE R90 Approved |
Weight | 1.71 kg |
Placement on Vehicle | Front Axle |
Length | 155.19 mm. 156.39 mm |
Width | 58.4 mm |
Thickness/Strength 1 | 19 mm |
Function | Brake Pad Set, disc brake |
Additional Information 2 | with piston clip |
Type | Brake Pad Set, disc brake |
Replaces | 16212 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 4 |
Function | Ignition Coil |
Type | Ignition Coil |
Weight | 2.3 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.06 kg |
Function | Thermostat, coolant |
Opening Temperature | 87 °C |
Type | Thermostat, coolant |
for OE number | 050 121 113 C S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Pneumatic |
Weight | 0.92 kg |
Valve type | Control Valve |
Type | Valve, lifting axle control |
Function | Valve, lifting axle control |
Internal Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Min. Length | 426 mm |
Max. Length | 696 mm |
Mounting points diameter | 24 mm |
Type | Shock Absorber |
Function | Shock Absorber |
Pipe Diameter | 80 mm. 69 mm |
Weight | 6.2 kg |
Placement on Vehicle | Rear Axle |
Shock Absorber Type | Oil Pressure |
Shock Absorber Design | Telescopic Shock Absorber |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Shock Absorber, driver cab suspension |
Placement on Vehicle | Rear |
External Thread Size | M12 x 1,25 |
Weight | 0.95 kg |
Operating Mode | Mechanical |
Max. Length | 182 mm |
Min. Length | 159 mm |
Pipe Diameter | 56 mm. 40 mm |
Mounting points diameter | 20 mm |
Shock Absorber Mounting Type | Top eye, Bottom Pin |
Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower, Front, Front Axle Right |
Outer diameter | 36 mm. 19 mm |
Thickness | 55 mm |
Inner diameter | 12 mm |
Function | Mounting, control/trailing arm |
Weight | 0.085 kg |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.365 kg |
Placement on Vehicle | Lower Front Axle, Rear |
Length | 50 mm |
Material | Rubber/Metal |
Outer diameter | 57.5 mm |
Inner diameter | 12.5 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 61 mm |
Thickness | 75 mm |
Inner diameter | 14 mm |
Shape/Form | Oval |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, control/trailing arm |
Placement on Vehicle | Rear Axle Left, inner, Rear Axle Right |
Weight | 0.37 kg |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5, M16 x 1,5 |
Weight | 0.64 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Inner Tie Rod |
Length | 298 mm |
Extra Description | ProKit |
Type | Inner Tie Rod |
Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.035 kg |
Placement on Vehicle | Front Axle |
Outer diameter | 40 mm. 50 mm |
Thickness | 55 mm |
Material | PU (Polyurethane) |
Function | Rubber Buffer, suspension |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Placement on Vehicle | Front Axle |
Weight | 0.82 kg |
Function | Repair Kit, suspension strut support mount |
Type | Repair Kit, suspension strut support mount |
Additional Information 2 | with ball bearing |
for OE number | 77 01 207 537 SK |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (22283)
- 1x Febi Rolling Bearing, suspension strut support mount (22305)
Important compatibility info
Function | Stabiliser Bar, suspension |
Length | 950 mm |
Placement on Vehicle | Front Axle |
Weight | 3.93 kg |
Extra Description | ProKit |
Additional Information | with rubber mounts |
Type | Stabiliser Bar, suspension |
Additional Information 2 | with coupling rod |
Stabiliser Diameter | 20 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (37073)
- 1x Febi Repair Kit, stabiliser bush (37079)
Important compatibility info
Height | 141 mm |
Outer diameter | 71 mm |
Inner diameter | 29 mm |
Filter type | Filter Insert |
Seal Diameter | 74 mm |
Function | Oil Filter |
Weight | 0.072 kg |
Type | Oil Filter |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 39 mm |
Outer diameter | 86 mm |
Inner diameter | 45 mm |
Bearing Type | Angular Ball Bearing |
Sealing lip material | NBR (nitrile butadiene rubber) |
Function | Wheel Bearing Kit |
Weight | 1.013 kg |
Type | Wheel Bearing Kit |
Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 418 mm |
Width | 194 mm |
Additional Information | with gasket/seal |
Material | Aluminium |
Thickness | 42 mm |
Weight | 0.936 kg |
Type | Heat Exchanger, interior heating |
Function | Heat Exchanger, interior heating |
Core Length | 370 mm |
Core Width | 188 mm |
Core Depth | 42 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.250 kg |
Placement on Vehicle | both sides |
Length | 658 mm |
Housing Diameter | 18 mm |
Eject Force | 410 N |
Stroke | 271 mm |
Mounting points diameter | 16.5 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Housing length | 366.5 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.23 kg |
Placement on Vehicle | Front Axle |
Length | 156.4 mm |
Width | 75.3 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 20 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Replaced by | 16772 |
Important compatibility info
Weight | 0.075 kg |
Number of Ribs | 5 |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Length | 880 mm |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.7 kg |
Placement on Vehicle | Rear Axle |
Shock Absorber Type | Oil Pressure |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 910 mm |
Min. Length | 540 mm |
Pipe Diameter | 76 mm. 63 mm |
Mounting points diameter | 20 mm |
Piston conrod diameter | 19 mm |
Function | Shock Absorber |
Type | Shock Absorber |
Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M18 x 1,5 |
Weight | 2.0 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 275 mm |
Rod/Strut | Coupling Rod |
Cone Size | 22 mm |
Pipe Diameter | 30 mm |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.045 kg |
Material | Plastic |
Opening Pressure | 1.4 bar |
Function | Cap, coolant tank |
for OE number | 13 05 248 |
Type | Cap, coolant tank |
Colour | Black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M18 x 1,5 |
Weight | 0.09 kg |
Length | 370 mm |
Spanner Size | 27 |
Number of Connectors / Ports | 2 |
Function | Switch, reverse light |
Additional Information | with gasket/seal |
Type | Switch, reverse light |
Additional Information 2 | with cable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.06 kg |
Outer diameter | 54 mm |
Opening Temperature | 87 °C |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width of castor bearing surface | 26 mm |
Material | Plastic |
Outer diameter | 80 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Weight | 0.260 kg |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 6.474 kg |
Placement on Vehicle | Front Axle, from 1st idler arm to the 2nd idler arm |
Length | 989 mm |
Width | 69 mm |
Thickness | 128 mm |
Rod/Strut | Push Rod |
Cone Size | 30 mm |
Pipe Diameter | 32 mm |
Function | Centre Rod Assembly |
Internal Thread Size | M24 x 1,5 RHT |
External Thread Size | M24 x 1,5 RHT |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.03 kg |
Number of Connectors / Ports | 3 |
Function | Sensor, camshaft position |
Length | 63.3 mm |
Type | Sensor, camshaft position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M16 x 1,5, M22 x 1,5, M8 x 1,25 |
Weight | 0.670 kg |
Number of Connectors / Ports | 5 |
Pressure | 13 bar |
Function | Multi-circuit Protection Valve |
Type | Multi-circuit Protection Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | NBR (nitrile butadiene rubber) |
Outer diameter | 73.43 mm |
Thickness | 8 mm |
Inner diameter | 55 mm |
Weight | 0.03 kg |
Type | Seal Ring, steering knuckle |
Function | Seal Ring, steering knuckle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023