Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Air Filter |
| Height | 387 mm |
| Outer diameter | 203 mm |
| Inner diameter | 95 mm |
| Type | Air Filter |
| Filter type | Filter Insert |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.43
Important compatibility info
| Housing length | 276.5 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 18 mm |
| Stroke | 206 mm |
| Eject Force | 270 N |
| Housing Diameter | 18 mm |
| Length | 511 mm |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.43
Important compatibility info
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 183807 |
| Type | Brake Caliper |
| Brake caliper piston diameter | 57 mm |
| Function | Brake Caliper |
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.43
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Function | Tie Rod |
| Internal Thread Size | M16 x 2 |
| External Thread Size | M16 x 2 |
| Paired article numbers | 14134 |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Inner Tie Rod (05198)
- 1x Febi Bolt, wheel alignment (05202)
- 1x Febi Tie Rod End (05201)
£32.43
Important compatibility info
| Colour | Green |
| Number of Connectors / Ports | 4 |
| Function | Resistor, interior blower |
| Extra Description | febi Plus |
| Type | Resistor, interior blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.44
Important compatibility info
| Number of Connectors / Ports | 3 |
| Ignition Coil | 4 Spark |
| Function | Ignition Coil |
| Type | Ignition Coil |
| Replaces | 21569 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.44
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Repair Kit, suspension strut support mount |
| Material | Rubber/Metal |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (22638)
- 1x Febi Rolling Bearing, suspension strut support mount (21757)
£32.45
Important compatibility info
| Additional Information | with lock nut |
| Function | Tie Rod |
| Paired article numbers | 39677 |
| Spanner Size | 41 |
| Length | 373 mm |
| Placement on Vehicle | Front Axle Right |
| External Thread Size | M14 x 1,5, M18 x 1,5 |
| Type | Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod (39674)
- 1x Febi Nut (38356)
£32.45
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 198136 |
| Number of Connectors / Ports | 2 |
| Cable Length | 1075 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.45
Important compatibility info
| Additional Information | with squeeze connector |
| Additional Information 2 | with plug |
| Number of Connectors / Ports | 14 |
| Cable Length | 250 mm |
| Type | Plug |
| Cross Section | 0.75 mm². 1.5 mm² |
| Function | Plug |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.45
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 198135 |
| Number of Connectors / Ports | 2 |
| Cable Length | 1090 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.45
Important compatibility info
| Width | 53.7 mm |
| Outer diameter | 40 mm |
| Inner diameter | 10.8 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Bearing, radiator fan shaft |
| Type | Bearing, radiator fan shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Width | 66 mm |
| Outer diameter | 130 mm. 35 mm |
| Inner diameter | 25 mm |
| Number of Holes | 4 |
| Bolt Hole Circle Diameter | 108 mm |
| Placement on Vehicle | Front Axle |
| Function | Wheel Hub |
| Type | Wheel Hub |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 63 mm |
| Outer diameter | 120 mm |
| Inner diameter | 30 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 100 mm |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
| Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Rated Power | 40 W |
| Voltage | 12 V |
| Placement on Vehicle | Front |
| Function | Wiper Motor |
| Type | Wiper Motor |
| Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Length | 180 mm |
| Width | 52 mm |
| Thickness | 105 mm |
| Inner diameter | 30 mm |
| Placement on Vehicle | Front |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Opening Temperature | 89 °C |
| Function | Thermostat, coolant |
| Number of Connectors / Ports | 4 |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal, with temperature sensor |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Placement on Vehicle | Right Front |
| Paired article numbers | 26497 |
| Function | Door Seal |
| Mounting Type | Glue on |
| Type | Door Seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Material | Metal |
| Notches / Holes Number | 1 |
| Function | Gasket, cylinder head |
| Type | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Function | Gasket Set, cylinder head cover |
| Material | ACM (Polyacrylate) |
| Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Expansion Tank, coolant |
| Additional Information | with coolant level sensor |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Sensor, coolant level (24052)
£32.47
Important compatibility info
| Number of Chain Links | 64 |
| Chain Type | Simplex, Closed chain |
| Placement on Vehicle | Upper |
| Function | Timing Chain |
| Additional Information 2 | Requires special tools for mounting |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Plastic |
| Cooling Hose | from thermostat to radiator |
| Function | Radiator Hose |
| Placement on Vehicle | Lower Right |
| Hose Length | 325 mm |
| Type | Radiator Hose |
| Additional Information 2 | with quick couplers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 38 mm |
| Function | Sensor, wheel speed |
| Number of Connectors / Ports | 2 |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Function | Sensor, wheel speed |
| Length | 1145 mm |
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 106326 |
| Number of Connectors / Ports | 2 |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Engine Management | Timing Chain |
| Type | Sprocket, crankshaft |
| Function | Sprocket, crankshaft |
| Number of Teeth | 21. 20 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Height | 160 mm |
| Outer diameter | 98 mm |
| Filter type | In-Line Filter, with filter heating |
| Pipe Diameter | 10 mm |
| Type | Fuel filter |
| Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Height | 14 mm |
| Material | NBR (nitrile butadiene rubber), FPM (fluoride rubber) |
| Outer diameter | 100 mm |
| Inner diameter | 65 mm |
| Type | Shaft Seal, differential |
| Function | Shaft Seal, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 107162 |
| Number of Connectors / Ports | 2 |
| Cable Length | 830 mm |
| Function | Sensor, wheel speed |
| Additional Information 2 | with retaining strap |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| for OE number | 1847 716 |
| Placement on Vehicle | Rear Axle, Front Axle |
| Function | Repair Kit, brake caliper |
| Type | Repair Kit, brake caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 25 |
| Internal Teeth, wheel side | 30 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Int. teeth, diff.side, conn.to transm. | 34 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Type | Timing Chain Kit |
| Number of Chain Links | 60 |
| Chain Type | Silent Chain, Closed chain |
| Function | Timing Chain Kit |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (48284)
- 1x Febi Chain Tensioner, oil pump drive (186557)
- 1x Febi Guide, timing chain (183522)
£32.47
Important compatibility info
| Function | Joint Kit, drive shaft |
| External Thread Size | M22 x 1,5 |
| Type | Joint Kit, drive shaft |
| Number of Teeth, ABS ring | 52 |
| Internal Teeth, wheel side | 26 |
| Seal Diameter | 60 mm |
| External Teeth, Wheel Side | 27 |
| Outer diameter | 94.5 mm |
| Length | 164 mm |
| Placement on Vehicle | Wheel Side, Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 25 |
| Internal Teeth, wheel side | 22 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Opening Temperature | 85 °C |
| Function | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Function | Oil Cooler, engine oil |
| Type | Oil Cooler, engine oil |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Placement on Vehicle | Right Rear |
| Length | 1486 mm |
| Paired article numbers | 188802 |
| Type | Cable Pull, parking brake |
| Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Material | ACM (Polyacrylate) |
| Type | Gasket, cylinder head cover |
| Function | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.47
Important compatibility info
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.48
Important compatibility info
| Number of Teeth | 22 |
| Inner diameter | 34 mm |
| Outer diameter | 70 mm |
| Width | 29 mm |
| Engine Management | Timing Belt |
| Function | Sprocket, crankshaft |
| Type | Sprocket, crankshaft |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Sprocket, crankshaft (25172)
- 1x Febi Pulley Bolt (17232)
£32.48
Important compatibility info
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Rear Axle Right |
| Length | 1715 mm |
| Paired article numbers | 171432 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.48
Important compatibility info
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 45 |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| External Teeth, Wheel Side | 35 |
| Thread Size | M33x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.48
Important compatibility info
| Housing material | Aluminium |
| Additional Information 2 | with seal ring |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.48
Important compatibility info
| Material | Rubber/Metal |
| Outer diameter | 110 mm |
| Thickness | 28 mm |
| Inner diameter | 40 mm |
| Number of Holes | 6 |
| Bolt Hole Circle Diameter | 78 mm |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.49
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Front Axle Left, Front Axle Right, Rear Axle Right |
| Length | 150 mm |
| Material | Rubber/Metal |
| Outer diameter | 91 mm |
| Thickness | 20 mm |
| Mounting points diameter | 14 mm |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Replaces | 19203 |
| Hole Spacing | 125 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.49
Important compatibility info
| Width | 30 mm |
| Material | Metal |
| Outer diameter | 80 mm |
| Function | Deflection Pulley/Guide Pulley, timing belt |
| Type | Deflection Pulley/Guide Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.49
Important compatibility info
| Number of mounting bores | 3 |
| Type | Central Slave Cylinder, clutch |
| Function | Central Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.49
Important compatibility info
| Force output F | 435 N |
| Function | Vibration Damper, v-ribbed belt |
| Type | Vibration Damper, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.50
Important compatibility info
| Material | Plastic |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
| Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.50
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023