Important compatibility info
Brake Caliper Type | Brake Caliper (1 piston) |
Function | Brake Caliper |
Brake caliper piston diameter | 42 mm |
Material | Cast Iron |
Placement on Vehicle | Rear Axle Right |
Type | Brake Caliper |
Paired article numbers | 180911 |
Weight | 2.066 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Metal, FPM (fluoride rubber) |
Thickness | 0.4 mm |
Width | 205 mm |
Weight | 0.130 kg |
Function | Gasket, cylinder head |
Length | 433 mm |
Type | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 51.54114.6086 SK3 |
Weight | 0.13 kg |
Type | Sealing Set, air compressor |
Function | Sealing Set, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle, Rear Axle |
Length | 206 mm |
Wear Warning Contact | excl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 19.8 mm |
Function | Brake Pad Set, disc brake |
Weight | 4.102 kg |
Width | 80 mm |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 11 V |
Spanner Size | 10 |
Function | Glow Plug |
Replaces | 18409 |
External Thread Size | M10 x 1 |
Type | Glow Plug |
Glow Plug Type | after-glow capable |
Fitting Depth | 27 mm |
Weight | 0.033 kg |
Length | 130.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Internally Vented |
Placement on Vehicle | Front Axle |
Weight | 3.85 kg |
Function | Brake Disc |
Surface | Coated |
Centering Diameter | 55 mm |
Bolt Hole Circle Diameter | 100 mm |
Minimum thickness | 16 mm |
Brake Disc Thickness | 18 mm |
Thickness | 43 mm |
Outer diameter | 235 mm |
Type | Brake Disc Rotor |
Rim Hole Number | 4 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 70 mm |
Operating Mode | Mechanical |
Housing material | Metal |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Type | Belt Tensioner, v-ribbed belt |
Weight | 0.438 kg |
Width of castor bearing surface | 24.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.540 kg |
Width | 25.5 mm |
Number of Teeth | 137 |
Function | Timing Belt Kit |
Type | Timing Belt Kit |
Belts | with rounded tooth profile |
Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (11039)
- 1x Febi Tensioner Pulley, timing belt (06687)
Important compatibility info
Weight | 1.526 kg |
Placement on Vehicle | Rear Axle |
Length | 130.1 mm |
Width | 55.2 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17.7 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Tappet |
Type | Tappet |
Outer diameter | 28 mm |
Material | Steel |
Placement on Vehicle | Intake Side |
Operating Mode | Mechanical |
Thickness | 70 mm |
Weight | 0.159 kg |
Inner diameter | 24 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cable Length | 800 mm |
Placement on Vehicle | Front Axle Right |
Number of Connectors / Ports | 2 |
Paired article numbers | 109547 |
Weight | 0.116 kg |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 109545 |
Number of Connectors / Ports | 2 |
Cable Length | 815 mm |
Function | Sensor, wheel speed |
Placement on Vehicle | Front Axle Left |
Weight | 0.116 kg |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.568 kg |
Material | Cast Aluminium |
Number of Wings | 6 |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Seal Material | Rubber |
Additional Information | with gaskets/seals |
Type | Water Pump, engine cooling |
for OE number | 037 121 010 C |
Hub external diameter | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Actuator, headlight levelling |
Placement on Vehicle | both sides |
Operating Mode | Electric |
Number of Connectors / Ports | 3 |
Extra Description | febi Plus |
Weight | 0.060 kg |
Type | Actuator, headlight levelling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, crankshaft pulse |
Number of Connectors / Ports | 3 |
Weight | 0.015 kg |
Type | Sensor, crankshaft pulse |
Additional Information 2 | with seal ring |
Replaces | 39605 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 163 mm |
Width | 66.9 mm |
Additional Information 2 | with anti-squeak plate |
Wear Warning Contact | prepared for wear warning indicator |
Inspection Tag | ECE R90 Approved |
Weight | 2.520 kg |
Thickness/Strength 1 | 20.5 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 670 mm |
Placement on Vehicle | both sides |
Eject Force | 630 N |
Housing Diameter | 22 mm |
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Piston conrod diameter | 10 mm |
Stroke | 213 mm |
Mounting points diameter | 18 mm |
Housing length | 336.5 mm |
Weight | 0.3 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear, both sides |
Length | 415 mm |
Eject Force | 520 N |
Stroke | 155 mm |
Housing Diameter | 22 mm |
Mounting points diameter | 18 mm |
Function | Gas Spring, boot/cargo area |
Piston conrod diameter | 18 mm |
Housing length | 239.5 mm |
Weight | 0.17 kg |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.820 kg |
Rotor Style | Internally Vented |
Rim Hole Number | 4 -Hole |
Placement on Vehicle | Front Axle |
Outer diameter | 235 mm |
Thickness | 51.5 mm |
Brake Disc Thickness | 18 mm |
Minimum thickness | 16 mm |
Bolt Hole Circle Diameter | 100 mm |
Centering Diameter | 63.3 mm |
Surface | Coated |
Number of mounting bores | 2 |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.72 kg |
Placement on Vehicle | Right Rear |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023