Important compatibility info
Weight | 0.066 kg |
Rims | for steel rims |
Outer diameter | 24.4 mm |
Screw length below head | 19 mm |
Function | Wheel Bolt |
Wheel Fastening | Ball seat A/G |
Quality/ Grade | 10.9 |
Bolt Head/Nut Design | Male Hex |
Thread Length | 19 mm |
Surface | Phosphatized |
Spanner Size | 19 |
Material | Steel |
Length | 38 mm |
Placement on Vehicle | Front Axle, Rear Axle |
Type | Wheel Bolt |
External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.22 kg |
Placement on Vehicle | Rear Axle |
Length | 368 mm |
Function | Suspension Spring |
Type | Suspension Spring |
Outer diameter | 116 mm |
Wire Diameter | 12.3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.040 kg |
Material | ACM (Polyacrylate) |
Thickness | 11.9 mm |
Inner diameter | 38.5 mm. 40 mm |
Outer diameter | 76 mm |
Function | Shaft Seal, differential |
Placement on Vehicle | Rear Axle, both sides |
Type | Shaft Seal, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Teeth | 141 |
Weight | 1.711 kg |
Belts | with rounded tooth profile |
Type | Water Pump & Timing Belt Kit |
Function | Water Pump & Timing Belt Kit |
Water pump impeller material | Plastic |
Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
Width of castor bearing surface | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (187718)
- 1x Febi Water Pump, engine cooling (18640)
Important compatibility info
Function | Air Filter |
Type | Air Filter |
Filter type | Filter Insert |
Width | 21 mm |
Height | 48 mm |
Length | 283 mm |
Weight | 0.23 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 14.400 kg |
Pipe Diameter | 50 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Hole Spacing | 152 mm |
Steering arm type | Trailing Arm |
Length | 605 mm |
Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.01 kg |
Type | Cover Sheet, brake drum |
Function | Cover Sheet, brake drum |
Placement on Vehicle | Front Axle |
Height | 78 mm |
Outer diameter | 449 mm |
Inner diameter | 212 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 114 mm |
Material | Thermoplast |
Function | Bellow Kit, drive shaft |
Weight | 0.276 kg |
Type | Bellow Kit, drive shaft |
Inner diameter 1 | 29 mm |
Inner diameter 2 | 96 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (48815)
- 1x Febi Clamping Clip (29816)
- 1x Febi Clamping Clip (45645)
- 2x Febi Molybdenum Grease (02582)
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 179 mm |
Material | Thermoplastic polyester elastomer |
Inner diameter 1 | 15 mm |
Inner diameter 2 | 55 mm |
Weight | 0.064 kg |
Type | Bellow Kit, steering |
Function | Bellow Kit, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.04 kg |
Number of Connectors / Ports | 3 |
Function | Sensor, speed |
Type | Sensor, speed |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.589 kg |
Surface | Coated |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 130 |
Timing Chain Size | G53HS |
Type | Timing Chain Kit |
Function | Timing Chain Kit |
Extra Description | Full Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49583)
- 1x Febi Tensioner, timing chain (34161)
- 1x Febi Gear Set, engine timing (33033)
- 2x Febi Bolt, camshaft gear (33034)
- 1x Febi Bolt, crankshaft gear (39116)
- 1x Febi Guide, timing chain (28517)
- 1x Febi Screw (33036)
- 1x Febi Guide, timing chain (28516)
- 2x Febi Screw (33037)
- 2x Febi Screw (33038)
- 1x Febi Quill, cylinder head (33039)
- 1x Febi Guide, timing chain (28518)
- 1x Febi Shaft Seal, oil pump (31144)
- 1x Febi Gasket, water pump (49406)
- 1x Febi Gasket, timing case cover (33079)
- 1x Febi Seal, thermostat (49408)
- 1x Febi Gasket, cylinder head cover (43629)
Important compatibility info
Material | Aluminium |
Weight | 0.595 kg |
for OE number | 1K2 614 019 H SK1 |
Type | Brake Master Cylinder |
Function | Brake Master Cylinder |
Piston Diameter | 22.2 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Rear |
Additional Information | with adjuster |
Operating Mode | Electric |
Paired article numbers | 192945 |
Number of Connectors / Ports | 7 |
Weight | 0.76 kg |
Type | Door Lock |
Function | Door Lock |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 78 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Weight | 0.877 kg |
Width of castor bearing surface | 28 mm |
Material | Metal |
Width | 48 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Starter |
Weight | 4.0 kg |
Type | Starter |
Rated Power | 2.0 kW |
Number of Teeth | 10 |
Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.35 kg |
Width | 30 mm |
Outer diameter | 86 mm |
Function | Tensioner Pulley, timing belt |
for OE number | 6 635 941 |
Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,75 |
Internal Thread Size | M16 x 1,5 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 120 mm |
Spanner Size | 25 |
Function | Tie Rod End |
Weight | 0.719 kg |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.077 kg |
Placement on Vehicle | Rear Axle Left, Upper, Rear, inner, Rear Axle Right |
Length | 37.98 mm |
Width | 40 mm |
Material | Rubber/Metal |
Outer diameter | 39.6 mm |
Thickness | 38 mm |
Inner diameter | 12.2 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Lock System | with lock barrel, with two keys |
Additional Information 2 | with switch, with bolts/screws |
Number of Connectors / Ports | 6 |
Weight | 0.987 kg |
Type | Steering Lock |
Function | Steering Lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 515 mm |
Weight | 0.090 kg |
Type | Brake Hose |
Function | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023