Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 500 mm |
| Housing Diameter | 18 mm |
| Eject Force | 530 N |
| Stroke | 171 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Housing length | 276.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.05
Important compatibility info
| Internal Teeth, wheel side | 29 |
| Function | Joint Kit, drive shaft |
| External Thread Size | M22 x 1,5 |
| Type | Joint Kit, drive shaft |
| Length | 150 mm |
| Outer diameter | 80 mm |
| External Teeth, Wheel Side | 28 |
| Seal Diameter | 58 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.05
Important compatibility info
| Function | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Front Axle |
| Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (184862)
- 2x Febi Protective Cap/Bellow, shock absorber (194275)
£34.05
Important compatibility info
| Additional Information 2 | with fastening material |
| Wear Warning Contact | prepared for wear warning indicator |
| Placement on Vehicle | Front Axle |
| Length | 177.4 mm |
| Width | 74.5 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 19 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.05
Important compatibility info
| Height | 533 mm |
| Additional Information | with gasket/seal |
| Outer diameter | 251 mm |
| Inner diameter | 160 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.06
Important compatibility info
| Type | Gasket, cylinder head cover |
| Material | ACM (Polyacrylate) |
| Function | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.06
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 368 mm |
| Cone Size | 18.5 mm |
| Function | Tie Rod |
| External Thread Size | M14 x 1,5, M18 x 1,5 |
| Type | Tie Rod |
| Steering | with tie rod end |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.07
Important compatibility info
| Material | Aluminium |
| Inner diameter | 30 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.07
Important compatibility info
| Outer diameter | 74.5 mm |
| Height | 112 mm |
| Inner diameter | 19.7 mm |
| Filter type | Filter Insert |
| Type | Fuel filter set |
| Function | Fuel filter set |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.07
Important compatibility info
| Function | Glow Plug |
| Mounting Type | Bolted |
| Spanner Size | 8 |
| Fitting Depth | 28 mm |
| External Thread Size | M8 x 1 |
| Voltage | 11 V |
| Length | 118.9 mm |
| Glow Plug Type | after-glow capable |
| Type | Glow Plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.07
Important compatibility info
| Placement on Vehicle | Front Axle |
| Height | 26 mm |
| Outer diameter | 452 mm |
| Type | Cover Sheet, brake drum |
| Function | Cover Sheet, brake drum |
| Inner diameter | 226 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.07
Important compatibility info
| Length | 130 mm |
| Voltage | 4.4 V |
| Type | Glow Plug |
| Glow Plug Type | Metal glow plug |
| Additional Information 2 | without pressure sensor |
| External Thread Size | M10 x 1 |
| Function | Glow Plug |
| Spanner Size | 10 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.07
Important compatibility info
| Length | 171 mm |
| Thickness | 92 mm |
| Spanner Size | 22 |
| Paired article numbers | 41322 |
| Function | Tie Rod End |
| Placement on Vehicle | Front Axle Right |
| External Thread Size | M22 x 1,5, M14 x 1,5 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.08
Important compatibility info
| Additional Information | with fastening/mounting material |
| Parameter | 27 |
| Stroke | 75 mm |
| Type | Diaphragm Brake Cylinder |
| Distance of fastening bolts | 120 mm |
| Function | Diaphragm Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.08
Important compatibility info
| Additional Information | with fastening/mounting material |
| Brake Type | Drum Brake |
| Parameter | Typ 30 |
| Stroke | 64 mm |
| Type | Diaphragm Brake Cylinder |
| Distance of fastening bolts | 120 mm |
| Piston Rod Length | 37 mm |
| Function | Diaphragm Brake Cylinder |
| Internal Thread Size | M12 x 1,5, M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.08
Important compatibility info
| Number of Connectors / Ports | 3 |
| Type | Sensor, exhaust pressure |
| Function | Sensor, exhaust pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.08
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 156.4 mm |
| Width | 68.5 mm |
| Wear Warning Contact | excl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 19.5 mm. 20.3 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.10
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Tie Rod |
| Function | Tie Rod |
| External Thread Size | M16 x 1,5, M12 x 1,5 |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (184891)
- 1x Febi Inner Tie Rod (184263)
£34.10
Important compatibility info
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 57 mm |
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178093 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.11
Important compatibility info
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | 03L 145 757 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.11
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023