Proud to be a UK-based company
Contact us
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 179460 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 54 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.34
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.34
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.34
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 180.1 mm. 181.4 mm |
| Width | 75 mm. 75.2 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 18 mm. 17.3 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Wear Warning Contact | prepared for wear warning indicator |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.34
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Tie Rod |
| Function | Tie Rod |
| External Thread Size | M12 x 1,5, M16 x 1,5 |
| Additional Information | with fastening/mounting material |
| Steering | with tie rod end |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (184891)
- 1x Febi Inner Tie Rod (184266)
£35.34
Important compatibility info
| Function | Wheel Bearing |
| Bearing Type | Tapered Roller Bearing |
| Outer diameter | 145 mm |
| Inner diameter | 95 mm |
| Placement on Vehicle | Outer |
| Width | 39 mm |
| Type | Wheel Bearing |
| Bearing Code | 33019 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.35
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Length | 1105 mm |
| Paired article numbers | 38369 |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.35
Important compatibility info
| Function | Repair Kit, clutch slave cylinder |
| Type | Repair Kit, clutch slave cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.35
Important compatibility info
| Number of Teeth, ABS ring | 100 |
| Function | Sensor Ring, ABS |
| Thickness | 18 mm |
| Outer diameter | 172 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Steel |
| Inner diameter | 160 mm |
| Type | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.35
Important compatibility info
| Housing Diameter | 18 mm |
| Eject Force | 400 N |
| Stroke | 99 mm |
| Mounting points diameter | 17.8 mm |
| Length | 311 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, bonnet |
| Housing length | 180.5 mm |
| Type | Gas Spring, bonnet |
| Additional Information | Change interval/date according to gas spring imprint |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.35
Important compatibility info
| Additional Information 2 | with ball bearing |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (100702)
- 1x Febi Rolling Bearing, suspension strut support mount (183292)
£35.35
Important compatibility info
| Material | Plastic |
| Colour | Black |
| Number of Connectors / Ports | 1. 4 |
| Type | Clock Spring, airbag |
| Function | Clock Spring, airbag |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.35
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Upper, Front, Rear Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 55 mm |
| Thickness | 54 mm |
| Inner diameter | 16.5 mm |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.35
Important compatibility info
| Length | 2845 mm |
| Width | 13 mm |
| Thickness | 10 mm |
| Function | Gasket, oil sump |
| Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.35
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 252 mm |
| Thickness | 48.8 mm |
| Brake Disc Thickness | 18 mm |
| Minimum thickness | 16.5 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 62.2 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Replaces | 108593 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.36
Important compatibility info
| Function | Guide Sleeve, clutch |
| Additional Information | with gasket/seal |
| Type | Guide Sleeve, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.36
Important compatibility info
| for OE number | 3093100 |
| Function | Repair Kit, clutch slave cylinder |
| Type | Repair Kit, clutch slave cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.37
Important compatibility info
| Type | Glow Plug |
| Glow Plug Type | Metal glow plug |
| Spanner Size | 8 |
| Voltage | 11 V |
| Length | 98.4 mm |
| Function | Glow Plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.37
Important compatibility info
| Additional Information | with temperature sensor, with gasket/seal |
| Opening Temperature | 90 °C |
| Housing Type | with housing |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.37
Important compatibility info
| Placement on Vehicle | Lower Front Axle, Left |
| Width | 145 mm |
| Material | Rubber/Metal |
| Outer diameter | 76 mm |
| Thickness | 33 mm |
| Inner diameter | 18 mm |
| Paired article numbers | 21469 |
| Colour Coding | Green |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Additional Information | with holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Holder, control arm mounting (21461)
- 1x Febi Mounting, control/trailing arm (04064)
£35.37
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 730 mm |
| Paired article numbers | 106280 |
| Number of Connectors / Ports | 2 |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.38
Important compatibility info
| Water pump impeller material | Metal |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Number of Teeth | 19 |
| Housing material | Cast Aluminium |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.38
Important compatibility info
| Function | Repair Kit, suspension strut support mount |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | without ball bearing, with fastening material |
| for OE number | 31 33 6 788 776 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.39
Important compatibility info
| Width of castor bearing surface | 30 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Outer diameter | 60 mm |
| Material | Plastic |
| Mounting points diameter | 10 mm |
| Inner diameter | 10 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with top |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.39
Important compatibility info
| Extra Description | febi Plus |
| Function | Oil sump |
| External Thread Size | M10 |
| Spanner Size | 12 |
| Additional Information 2 | with seal ring |
| Type | Oil sump |
| Length | 459 mm |
| Wet Sump Material | Sheet Steel |
| Additional Information | with oil drain plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.41
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 597 mm |
| Housing Diameter | 25 mm |
| Eject Force | 385 N |
| Stroke | 224 mm |
| Mounting points diameter | 17.8 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Housing length | 340 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.41
Important compatibility info
| Placement on Vehicle | Front Axle |
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Material | Rubber/Metal |
| Additional Information 2 | with ball bearing |
| for OE number | 204 320 11 73 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (28526)
- 1x Febi Rolling Bearing, suspension strut support mount (29475)
£35.42
Important compatibility info
| Operating Mode | Manual |
| Paired article numbers | 08447 |
| Function | Adjuster, braking system |
| Placement on Vehicle | Front Axle Left |
| Number of Teeth | 10 |
| Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.42
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Operating Mode | Manual |
| Function | Adjuster, braking system |
| Paired article numbers | 08446 |
| Type | Adjuster, braking system |
| Number of Teeth | 10 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.42
Important compatibility info
| Placement on Vehicle | Front Axle Left, Rear Axle Left |
| Function | Adjuster, drum brake |
| Type | Adjuster, drum brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£35.42
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023