Important compatibility info
| Additional Information | with nuts |
| Steering arm type | for control arm |
| Additional Information 2 | with bolts/screws |
| Placement on Vehicle | Lower, Front Axle Left, Front Axle Right |
| Inner diameter | 10.5 mm |
| Function | Ball Joint |
| Type | Ball Joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 72.9 mm |
| Type | Thermostat, coolant |
| Opening Temperature | 86 °C |
| Function | Thermostat, coolant |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Opening Temperature | 85 °C |
| Outer diameter | 72.9 mm |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with piston clip |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 20.7 mm |
| Inspection Tag | ECE R90 Approved |
| Placement on Vehicle | Front Axle |
| Length | 193.1 mm |
| Width | 81.9 mm |
| Wear Warning Contact | incl. wear warning contact |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Shock Absorber |
| Type | Shock Absorber |
| Piston conrod diameter | 14 mm |
| Placement on Vehicle | Front Axle |
| Pipe Diameter | 60 mm. 51 mm |
| Mounting points diameter | 24 mm |
| External Thread Size | M14 x 1,5 |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 844 mm |
| Min. Length | 515 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Pipe Diameter | 65 mm. 76 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 16 mm |
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Rear Axle |
| Min. Length | 481 mm |
| Max. Length | 794 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Mechanical |
| Min. Length | 283 mm |
| Pipe Diameter | 50 mm |
| Type | Shock Absorber, driver cab suspension |
| Mounting points diameter | 50 mm. 20 mm |
| Max. Length | 298 mm |
| Placement on Vehicle | Right Front |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber, driver cab suspension |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Washer Fluid Jet, headlight cleaning |
| Extra Description | febi Plus |
| Paired article numbers | 173711 |
| Type | Washer Fluid Jet, headlight cleaning |
| Placement on Vehicle | Right |
| Additional Information | with lift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| Max. Length | 300 mm |
| Shock Absorber Mounting Type | Top eye, Bottom Yoke |
| Operating Mode | Mechanical |
| Min. Length | 210 mm |
| Pipe Diameter | 92 mm. 45 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 13 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| for OE number | 24312-27250 S3 |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Width | 28 mm |
| Number of Teeth | 123 |
| Belts | with rounded tooth profile |
| Replaces | 173313 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (31213)
- 1x Febi Water Pump, engine cooling (32758)
Important compatibility info
| Placement on Vehicle | Lower, Front Axle Right |
| Material | Sheet Steel |
| Additional Information 2 | without ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 173737 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower, Front Axle Left |
| Material | Sheet Steel |
| Additional Information 2 | without ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 173736 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 173557 |
| Number of Connectors / Ports | 2 |
| Cable Length | 1690 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information | with rubber-metal mounts |
| Placement on Vehicle | Rear Axle Right, Upper |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 173741 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Inspection Tag | ECE R90 Approved |
| Type | Brake Pad Set, disc brake |
| Width | 94.4 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Length | 209.5 mm |
| Placement on Vehicle | Front Axle |
| Thickness/Strength 1 | 16.4 mm |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 131.8 mm |
| Width | 75 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17.1 mm |
| Wear Warning Contact | incl. wear warning contact |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 22 mm |
| Number of Teeth | 105 |
| Belts | with rounded tooth profile |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Water pump impeller material | Metal |
| Replaces | 173152 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (31061)
- 1x Febi Water Pump, engine cooling (173147)
Important compatibility info
| Additional Information | with holder, with hose |
| Voltage | 12 V |
| Operating Mode | Electric |
| Type | Auxiliary water pump (cooling water circuit) |
| Function | Auxiliary water pump (cooling water circuit) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | without ball joint |
| Material | Sheet Steel |
| Placement on Vehicle | Lower, Front Axle Right |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 173754 |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Steering arm type | Control Arm |
| Paired article numbers | 173752 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Lower, Front Axle Left |
| Material | Sheet Steel |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Timing Chain Size | G53HS-8, G53HS-7 |
| Chain Type | Simplex, with chain lock |
| Placement on Vehicle | Upper |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Number of Chain Links | 86 |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49508)
- 1x Febi Tensioner, timing chain (28718)
- 1x Febi Gasket Set, cylinder head cover (107453)
Important compatibility info
| Function | Water Pump & Timing Belt Kit |
| Number of Teeth | 150 |
| Water pump impeller material | Metal |
| for OE number | RF7J-12-205 S3 |
| Belts | with rounded tooth profile |
| Type | Water Pump & Timing Belt Kit |
| Width | 30 mm |
| Units / Pulleys | incl. tensioner pulley, incl. deflection pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (31726)
- 1x Febi Water Pump, engine cooling (173468)
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 77 mm |
| Thickness | 95 mm |
| Inner diameter 1 | 19 mm |
| Inner diameter 2 | 27 mm |
| Type | Mounting, support frame/subframe |
| Function | Mounting, support frame/subframe |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with fastening material |
| Length | 110.6 mm |
| Function | Brake Pad Set, disc brake |
| Wear Warning Contact | prepared for wear warning indicator |
| Type | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 16.5 mm |
| Placement on Vehicle | Rear Axle |
| Width | 73.1 mm. 66.1 mm |
| Inspection Tag | ECE R90 Approved |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 95.6 mm |
| Width | 43.7 mm |
| Wear Warning Contact | with acoustic wear warning |
| Placement on Vehicle | Rear Axle |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 17 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Resistance | 1400 Ohm |
| Placement on Vehicle | Front Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 1060 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Clutch Booster |
| Type | Clutch Booster |
| Fill Medium | Brake Fluid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Intake Side, Exhaust Side |
| Type | Gasket, cylinder head cover |
| Function | Gasket, cylinder head cover |
| Length | 397 mm |
| Height | 7.8 mm |
| Width | 91 mm |
| Material | MVQ (silicone rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
| Width | 58 mm |
| Placement on Vehicle | Rear Axle |
| Material | Thermoplast, PU (Polyurethane) |
| Length | 190 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (173638)
- 2x Febi Rubber Buffer, suspension (104210)
Important compatibility info
| Height | 122 mm |
| Outer diameter | 83 mm |
| Inner diameter | 18 mm |
| Filter type | Filter Insert |
| Seal Diameter | 99 mm |
| Type | Oil Filter |
| Function | Oil Filter |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 201 mm |
| Outer diameter | 54 mm |
| Additional Information 2 | with seal ring |
| Inner diameter | 16 mm |
| Filter type | Filter Insert |
| Seal Diameter | 66 mm |
| Type | Oil Filter |
| Function | Oil Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Electric |
| Function | EGR Valve |
| for OE number | 14956-00Q1A |
| Type | EGR Valve |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M22 x 1,5 |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Length | 147 mm |
| Outer diameter | 80 mm |
| External Teeth, Wheel Side | 22 |
| Seal Diameter | 69 mm |
| Internal Teeth, wheel side | 22 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 152 mm |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Outer diameter | 84.5 mm |
| External Teeth, Wheel Side | 25 |
| Seal Diameter | 51 mm |
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 24 |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Cable Length | 1044 mm |
| Number of Connectors / Ports | 2 |
| Paired article numbers | 106715 |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 162 mm |
| Height | 182 mm |
| Width | 122 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Pipe Diameter | 10 mm |
| Type | Fuel filter |
| Function | Fuel filter |
| Filter type | In-Line Filter |
| Height | 230 mm |
| Outer diameter | 108 mm |
| Housing material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with seal ring |
| External Thread Size | M10 x 1 |
| Type | Screw Plug, automatic transmission casing |
| Spanner Size | 5 |
| Function | Screw Plug, automatic transmission casing |
| Length | 13 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Voltage | 12 V |
| Type | Interior Blower |
| Function | Interior Blower |
| Driver Position | for right-hand drive vehicles |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 30 mm |
| Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Number of Teeth | 101 |
| Belts | with rounded tooth profile |
| Type | Timing Belt |
| Function | Timing Belt |
| Surface | PTFE (Polytetrafluorethylene) coated |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 330 mm |
| Number of Coils | 5 |
| Outer diameter | 156 mm |
| Function | Suspension Spring |
| Type | Suspension Spring |
| Placement on Vehicle | Front Axle |
| Wire Diameter | 13 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Teeth | 38 |
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Camshaft Adjuster (171987)
- 1x Febi Bolt, camshaft gear (101125)
- 1x Febi Quill, cylinder head (101129)
Important compatibility info
| Extra Description | Basic Short Kit |
| for OE number | 03C 109 158 H S1 |
| Chain Type | Silent Chain, Closed chain |
| Function | Timing Chain Kit |
| Number of Chain Links | 132 |
| Type | Timing Chain Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (105796)
- 1x Febi Tensioner, timing chain (36484)
- 1x Febi Guide, timing chain (36224)
- 1x Febi Guide, timing chain (173674)
Important compatibility info
| Opening Temperature | 50 °C |
| Additional Information 2 | with seal ring |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Placement on Vehicle | Rear Axle |
| Pipe Diameter | 65 mm. 76 mm |
| Max. Length | 719 mm |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Piston conrod diameter | 20 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M16 x 1,5 |
| Min. Length | 423 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Outer |
| Number of Connectors / Ports | 2 |
| Type | Sensor, exterior temperature |
| Function | Sensor, exterior temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 214 mm |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Left Front |
| Operating Mode | Manual |
| Paired article numbers | 174024 |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Right Front |
| Operating Mode | Manual |
| Paired article numbers | 174023 |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M22 x 1,5 |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Length | 134 mm |
| Outer diameter | 75 mm |
| External Teeth, Wheel Side | 22 |
| Seal Diameter | 51 mm |
| Internal Teeth, wheel side | 21 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































