Proud to be a UK-based company
Contact us
Important compatibility info
| Length | 185 mm |
| Height | 158 mm |
| Width | 98.5 mm |
| Additional Information | with gasket/seal |
| Additional Information 2 | with filter |
| Filter type | with water drain screw |
| Type | Housing, fuel filter |
| Function | Housing, fuel filter |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.11
Important compatibility info
| Length | 331 mm |
| Additional Information | with oil drain plug |
| Material | Steel |
| Additional Information 2 | with seal ring |
| Spanner Size | 14 |
| Type | Oil sump |
| Function | Oil sump |
| Extra Description | febi Plus |
| External Thread Size | M12 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.11
Important compatibility info
| Steering arm type | for control arm |
| Function | Ball Joint |
| Type | Ball Joint |
| Mounting points diameter | 13.5 mm. 12.5 mm |
| Cone Size | 16 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.12
Important compatibility info
| Placement on Vehicle | Right Exterior Mirror |
| Length | 137 mm |
| Width | 70 mm |
| Thickness | 20 mm |
| Voltage | 12 V |
| Paired article numbers | 183637 |
| Driver Position | for left-hand/right-hand drive vehicles |
| Outer/Inner Mirror | Heatable |
| Type | Mirror Glass, wide angle mirror |
| Camber Radius | 300 mm |
| Function | Mirror Glass, wide angle mirror |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.12
Important compatibility info
| Placement on Vehicle | Right |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.13
Important compatibility info
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 247 mm |
| Thickness | 44.4 mm |
| Brake Disc Thickness | 12 mm |
| Minimum thickness | 10 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 60 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.13
Important compatibility info
| Placement on Vehicle | Rear, Lower |
| Length | 205 mm |
| Width | 102 mm |
| Thickness | 49 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, automatic transmission |
| Type | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.13
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 340 mm |
| Outer diameter | 146 mm |
| Function | Suspension Spring |
| Wire Diameter | 13.5 mm |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.13
Important compatibility info
| for OE number | 58 0156 3634 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Bushing, leaf spring |
| Function | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.13
Important compatibility info
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Placement on Vehicle | Lower, Rear |
| Type | Mounting, engine |
| for OE number | 11 23 800 04R |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.13
Important compatibility info
| Additional Information | with oil drain plug |
| Length | 363 mm |
| Additional Information 2 | with bore for oil-level sensor, with seal ring |
| Spanner Size | 17 |
| Type | Oil sump |
| Function | Oil sump |
| Extra Description | febi Plus |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.13
Important compatibility info
| Bore Diameter | 21 mm |
| Fill Medium | Brake Fluid |
| Type | Slave Cylinder, clutch |
| Function | Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.14
Important compatibility info
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, manual transmission |
| Function | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.14
Important compatibility info
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Mounting points diameter | 10 mm |
| Width of castor bearing surface | 26 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Material | Plastic |
| Additional Information 2 | with screw |
| Outer diameter | 65 mm |
| Inner diameter | 10 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.14
Important compatibility info
| Additional Information 2 | with seal ring |
| Length | 59 mm |
| Number of Connectors / Ports | 3 |
| Function | Sensor, camshaft position |
| Type | Sensor, camshaft position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.14
Important compatibility info
| Width | 25 mm |
| Outer diameter | 60 mm |
| Inner diameter | 8 mm |
| Function | Tensioner Pulley, timing belt |
| Type | Tensioner Pulley, timing belt |
| Width of castor bearing surface | 54 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.15
Important compatibility info
| Paired article numbers | 107629 |
| Number of Connectors / Ports | 2 |
| Cable Length | 620 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.15
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 170681 |
| Number of Connectors / Ports | 2 |
| Cable Length | 1664 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.15
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 170672 |
| Number of Connectors / Ports | 2 |
| Cable Length | 1664 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.15
Important compatibility info
| Function | Joint Kit, drive shaft |
| Number of Teeth, ABS ring | 51 |
| Type | Joint Kit, drive shaft |
| External Teeth, Wheel Side | 28 |
| Length | 167 mm |
| Outer diameter | 101 mm |
| Placement on Vehicle | Wheel Side, Front Axle |
| Internal Teeth, wheel side | 36 |
| Seal Diameter | 65 mm |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.15
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023