Proud to be a UK-based company
Contact us
Important compatibility info
| Type | Joint Kit, drive shaft |
| Number of Teeth, ABS ring | 48 |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Length | 161 mm |
| Outer diameter | 92 mm |
| External Teeth, Wheel Side | 29 |
| Seal Diameter | 74 mm |
| Internal Teeth, wheel side | 26 |
| Weight | 2.960 kg |
| Function | Joint Kit, drive shaft |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Function | Expansion Tank, coolant |
| Weight | 0.300 kg |
| Type | Expansion Tank, coolant |
| for OE number | 2 088 138 |
| Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Weight | 0.232 kg |
| Cross Section | 35 mm² |
| Type | Plug |
| Number of Connectors / Ports | 2 |
| Function | Plug |
| Port / Connector type | REMA Connector |
| Version | Aftermarket |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Weight | 0.544 kg |
| Function | Slave Cylinder, clutch |
| Type | Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Housing Diameter | 18 mm |
| Eject Force | 400 N |
| Stroke | 99 mm |
| Mounting points diameter | 17.8 mm |
| Length | 311 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, bonnet |
| Housing length | 180.5 mm |
| Weight | 0.164 kg |
| Type | Gas Spring, bonnet |
| Additional Information | Change interval/date according to gas spring imprint |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Placement on Vehicle | Front |
| Type | Wiper Motor |
| Weight | 1.05 kg |
| Rated Power | 30 W |
| Driver Position | for left-hand drive vehicles |
| Function | Wiper Motor |
£34.45
Important compatibility info
| Weight | 0.430 kg |
| Placement on Vehicle | Lower, Rear |
| Material | Aluminium, Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Colour | Red |
| Number of Connectors / Ports | 6 |
| Function | Resistor, interior blower |
| Extra Description | febi Plus |
| Type | Resistor, interior blower |
| Weight | 0.060 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Seal Diameter | 50 mm |
| Internal Teeth, wheel side | 22 |
| Length | 153 mm |
| Outer diameter | 79.5 mm |
| External Teeth, Wheel Side | 25 |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
| Weight | 1.930 kg |
| External Thread Size | M22 x 1,5 |
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
| Number of Teeth, ABS ring | 44 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Weight | 0.061 kg |
| Number of Connectors / Ports | 2 |
| Cable Length | 870 mm |
| Function | Sensor, wheel speed |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Function | Radiator Hose |
| Cooling Hose | from distributor to engine cooler |
| Type | Radiator Hose |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Additional Information 2 | with quick couplers |
| Weight | 0.52 kg |
| Placement on Vehicle | Upper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Repair kit, supporting/ball joint |
| External Thread Size | M18 x 1,25 |
| Weight | 1.47 kg |
| Type | Repair kit, supporting/ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Pump Type | Mono Pump |
| Function | Washer Fluid Pump, window cleaning |
| Weight | 0.1 kg |
| Type | Washer Fluid Pump, window cleaning |
| for OE number | 28920-AR000 |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Steering arm type | Control Arm |
| Placement on Vehicle | Rear Axle |
| Length | 69.5 mm |
| Outer diameter | 35 mm. 30 mm |
| Inner diameter | 12 mm |
| Function | Mounting and Bolting Kit, control/trailing arm |
| Weight | 0.200 kg |
| for OE number | 33 32 9 058 822 |
| Type | Mounting and Bolting Kit, control/trailing arm |
Additional Information
Technical Information
Excentric type for track correction of vehicles with lowered suspension (non-factory).
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Mounting, control/trailing arm (04048)
£34.45
Important compatibility info
| Outer diameter | 280 mm |
| Operating Mode | Electric |
| Number of Connectors / Ports | 3 |
| Rated Power | 60 W, 100 W |
| Number of Wings | 6 |
| Weight | 2.0 kg |
| Function | Fan, engine cooling |
| Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Weight | 0.081 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Cable Length | 1080 mm |
| Function | Sensor, wheel speed |
| Number of Connectors / Ports | 2 |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Weight | 0.35 kg |
| Width | 30 mm |
| Outer diameter | 86 mm |
| Function | Tensioner Pulley, timing belt |
| for OE number | 6 635 941 |
| Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.45
Important compatibility info
| Opening Temperature | 87 °C |
| Weight | 0.24 kg |
| Additional Information | with gasket/seal |
| Housing Type | with housing |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.46
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Weight | 0.080 kg |
| Paired article numbers | 178005 |
| Function | Sensor, wheel speed |
| Cable Length | 735 mm |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.46
Important compatibility info
| Width of castor bearing surface | 30 mm |
| Weight | 0.210 kg |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Outer diameter | 60 mm |
| Material | Plastic |
| Mounting points diameter | 10 mm |
| Inner diameter | 10 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with top |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.47
Important compatibility info
| Weight | 2.2 kg |
| Function | Suspension Spring |
| Placement on Vehicle | Front Axle |
| Length | 327 mm |
| Outer diameter | 166 mm |
| Type | Suspension Spring |
| Wire Diameter | 13.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.48
Important compatibility info
| Function | Sensor, wheel speed |
| Cable Length | 620 mm |
| Type | Sensor, wheel speed |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Weight | 0.04 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.48
Important compatibility info
| Weight | 1.23 kg |
| Placement on Vehicle | Front Axle Left, Outer, Front Axle Right |
| Width | 27 mm |
| Outer diameter | 125 mm |
| Inner diameter | 70 mm |
| Bearing Type | Cylindrical Roller Bearing |
| Type | Wheel Bearing |
| Function | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Function | Bellow, driver cab suspension |
| Type | Bellow, driver cab suspension |
| Weight | 1.3 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 2.060 kg |
| Outer diameter | 84.5 mm |
| Internal Teeth, wheel side | 23 |
| External Teeth, Wheel Side | 26 |
| Seal Diameter | 58 mm |
| Function | Joint Kit, drive shaft |
| Length | 149 mm |
| Type | Joint Kit, drive shaft |
| Number of Teeth, ABS ring | 48 |
| External Thread Size | M22 x 1,5 |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Paired article numbers | 180302 |
| Placement on Vehicle | Front, Right |
| Function | Wiper Arm, window cleaning |
| Type | Wiper Arm, window cleaning |
| Weight | 0.440 kg |
| Additional Information 2 | with integrated washer fluid jet |
| Material | Steel |
| Length | 633 mm |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Length | 1740 mm |
| Outer diameter | 8 mm |
| Weight | 0.15 kg |
| Pressure | 400 bar |
| Function | Hose Line, driver cab tilting device |
| Inner diameter | 4.2 mm |
| External Thread Size | M12 x 1,5 |
| Type | Hose Line, driver cab tilting device |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Thread Size | M33x1,5 |
| Internal Teeth, wheel side | 27 |
| External Teeth, Wheel Side | 35 |
| Weight | 3.666 kg |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 0.199 kg |
| Height | 169 mm |
| Outer diameter | 107 mm |
| Additional Information 2 | with seal ring |
| Spanner Size | 36 |
| Bolt Head/Nut Design | Male Hex |
| Tightening Torque | 25 Nm |
| Type | Cap, oil filter housing |
| Function | Cap, oil filter housing |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
Important compatibility info
| Weight | 0.060 kg |
| Extra Description | febi Plus |
| Colour | Black |
| Number of Connectors / Ports | 2 |
| Cable Length | 157 mm |
| Function | Sensor, engine oil level |
| Type | Sensor, engine oil level |
| Additional Information 2 | with seal ring |
| Hole Spacing | 50 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.49
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023