Important compatibility info
Weight | 0.40 kg |
Function | Cap, wheel bearing |
Type | Cap, wheel bearing |
Inner diameter | 52 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Teeth | 8 |
Rated Power | 0.9 kW |
Weight | 3.06 kg |
Type | Starter |
Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Passenger Side |
Number of Connectors / Ports | 9 |
Weight | 0.100 kg |
Combi Switch Function | Window Regulator |
Type | Multi-Function Switch |
Function | Multi-Function Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.070 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 195 mm |
Material | Thermoplast |
Function | Bellow Kit, steering |
Type | Bellow Kit, steering |
Additional Information 2 | with clamps |
Inner diameter 1 | 14 mm |
Inner diameter 2 | 50 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (102118)
- 1x Febi Clamping Clip (38755)
- 1x Febi Clamping Clip (38763)
Important compatibility info
Weight | 0.013 kg |
Material | ACM (Polyacrylate) |
Function | Gasket, intake manifold |
Type | Gasket, intake manifold |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Wheel Brake Cylinder |
Weight | 0.157 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Aluminium |
Piston Diameter | 17.8 mm |
Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 145 mm |
Width | 115 mm |
Weight | 0.012 kg |
Thickness | 1.3 mm |
Function | Gasket, oil cooler |
Type | Gasket, oil cooler |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Length | 517 mm |
Housing Diameter | 18 mm |
Eject Force | 355 N |
Stroke | 198 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Housing length | 287 mm |
Weight | 0.24 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Mounting, engine |
Function | Mounting, engine |
Weight | 0.590 kg |
Placement on Vehicle | Front Axle, Rear |
Bearing/Mounting Type | Rubber-Metal Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.0012 kg |
Type | Locking Pin, auto. trans. dipstick sealing piece |
Function | Locking Pin, auto. trans. dipstick sealing piece |
Extra Description | febi Plus |
Colour | Red |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Locking Pin, auto. trans. dipstick sealing piece (44204)
- 1x Febi Locking Pin, auto. trans. dipstick sealing piece (172594)
Important compatibility info
Function | Brake Hose |
Type | Brake Hose |
Weight | 0.080 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 442 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Timing Belt Kit |
Width | 25 mm |
Weight | 1.284 kg |
Type | Timing Belt Kit |
Driven Units | Camshaft, Oil Pump |
Number of Teeth | 145. 53 |
Additional Information | with fastening/mounting material |
Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (48289)
- 1x Febi Timing Belt (48288)
- 1x Febi Tensioner Pulley, timing belt (47604)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (37019)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (07022)
- 1x Febi Shaft Seal, crankshaft (46749)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (181517)
Important compatibility info
Tightening Torque | 25 Nm |
Function | Cap, oil filter housing |
Height | 61.4 mm |
Weight | 0.125 kg |
Outer diameter | 87.4 mm |
Extra Description | febi Plus |
Type | Cap, oil filter housing |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.002 kg |
Width | 70.6 mm |
Placement on Vehicle | Front Axle |
Length | 184.2 mm |
Additional Information 2 | with anti-squeak plate, with fastening material |
Wear Warning Contact | incl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Cable Length | 132 mm |
Thickness/Strength 1 | 19.6 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 5 -Hole |
Rotor Style | Solid |
Weight | 5.61 kg |
Placement on Vehicle | Rear Axle |
Outer diameter | 290 mm |
Thickness | 47 mm |
Brake Disc Thickness | 13 mm |
Minimum thickness | 11 mm |
Bolt Hole Circle Diameter | 114.3 mm |
Centering Diameter | 68 mm |
Surface | Coated |
Number of mounting bores | 2 |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.410 kg |
Placement on Vehicle | Rear |
Length | 1760 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 221 mm |
Filter type | Activated Carbon Filter |
Function | Filter, cabin air |
Type | Filter, cabin air |
Length | 263 mm |
Height | 43 mm |
Weight | 0.300 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cable Length | 535 mm |
Type | Sensor, crankshaft pulse |
Function | Sensor, crankshaft pulse |
Number of Connectors / Ports | 2 |
Weight | 0.06 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Operating Mode | Electric |
Type | Auxiliary water pump (cooling water circuit) |
Function | Auxiliary water pump (cooling water circuit) |
Weight | 0.25 kg |
Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 110.6 mm |
Placement on Vehicle | Rear Axle |
Additional Information 2 | with fastening material |
Width | 46.4 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Thickness/Strength 1 | 16.9 mm |
Inspection Tag | ECE R90 Approved |
Weight | 1.080 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023